Phone ring lag problem - MDA III, XDA III, PDA2k, 9090 ROM Development

I phoned my pocket pc from my home phone I had to wait 4 rings to see that I'm actually receiving a call. I tried a soft reset but doesn't help.
I am with this ROM -> WM6.1 5.2.19716 hoangdat_VT, I have lots of programs installed, 14mb internal memory free and 64 RAM Free. I don't have any Caller ID software and I am using the stock ringtones.
ps I'm starting to hate blueangel, it's so slow in every situation

I am using xplode's WM6 rom, and just tested with both PDA screen on and off, neither took longer than one ring on my house phone. Maybe try another rom, or check with another cell phone. It could always be your carrier that is being slow and not your blue angel.

EmZvr said:
ps I'm starting to hate blueangel, it's so slow in every situation
Click to expand...
Click to collapse
u r not alone

Sold my BlueAngel , sick of it ... retired ..

angerfist7777 said:
I am using xplode's WM6 rom, and just tested with both PDA screen on and off, neither took longer than one ring on my house phone. Maybe try another rom, or check with another cell phone. It could always be your carrier that is being slow and not your blue angel.
Click to expand...
Click to collapse
There's no problem with my ROM either. When I installed it without any programs, everything was ok. Now somethings wrong :/I know xplode's ROM is the best but I'm staying with this because it is only ROM that works with Wifi driver 2 and Helmi Broadcomm Bluetooth Drivers. I know hard reset will fix the problem but I'm tired of it Any other ideas ?
Soon I will do just like Xeon but the main problems is that I don't have money right now.

I'm using xplode's ROM, and the only problems I have with bluetooth and wireless are as follows:
Beam must be enabled for bluetooth to send and recieve, a 2 second job from comm manager.
WiFi must be switched on in wireless settings before comm manager after each reset.
I'm sure at some point soon the problems will be fixed, but as there is no official WM6 for the BA, by using it you're accepting that the developers haven't fixed everything and as such it wont be perfect.
If a hard reset will fix it, it takes my BA no more than a minute to boot back up and 30 seconds to apply the wireless settings (although I don't normally need it straight away), I don't see why doing so isn't a good idea? I treat my BA like a PC. Not a good idea to have it running for a long time without rebooting, as it will bog down.

angerfist7777 said:
I'm using xplode's ROM, and the only problems I have with bluetooth and wireless are as follows:
Beam must be enabled for bluetooth to send and recieve, a 2 second job from comm manager.
WiFi must be switched on in wireless settings before comm manager after each reset.
I'm sure at some point soon the problems will be fixed, but as there is no official WM6 for the BA, by using it you're accepting that the developers haven't fixed everything and as such it wont be perfect.
If a hard reset will fix it, it takes my BA no more than a minute to boot back up and 30 seconds to apply the wireless settings (although I don't normally need it straight away), I don't see why doing so isn't a good idea? I treat my BA like a PC. Not a good idea to have it running for a long time without rebooting, as it will bog down.
Click to expand...
Click to collapse
Also you can't see other's bluetooth shared folders like on every standart phone. I got a pocket pc and I can't do that that's just a shame. There are also no services for the bluetooth and with some phones/pc I can't receive files because they need file sharing server, there's no serial port service no dial upq no HID service. You can't make other devices never to asko you for password. I have all this with my ROM. The only bad thing is that's a little slower tha xplode's ROM. But I decided to do a LAST hard reset and go back to xplode's rom. I will miss the great bluetooth software and the one click turn on Wifi function
Anyway thanks for the help.

Hopefully xplode will get around to fixing such things then

EmZvr said:
I phoned my pocket pc from my home phone I had to wait 4 rings to see that I'm actually receiving a call. I tried a soft reset but doesn't help.
I am with this ROM -> WM6.1 5.2.19716 hoangdat_VT, I have lots of programs installed, 14mb internal memory free and 64 RAM Free. I don't have any Caller ID software and I am using the stock ringtones.
ps I'm starting to hate blueangel, it's so slow in every situation
Click to expand...
Click to collapse
Maybe you've overclocked your BA ;], my MDA working just fine. Speed is aversome, after half ring my PDA start ringing.
ROM from pdaviet DVH 19199 - speed is great! much faster from TYTN (i have one) with 'rom polok'.
Only issue is battery with RADIO 1.06 . PDA with phone turn off work about one WEEK, but when we turn on GSM, its drain battery ~1%/1h.

wikiri said:
Maybe you've overclocked your BA ;], my MDA working just fine. Speed is aversome, after half ring my PDA start ringing.
ROM from pdaviet DVH 19199 - speed is great! much faster from TYTN (i have one) with 'rom polok'.
Only issue is battery with RADIO 1.06 . PDA with phone turn off work about one WEEK, but when we turn on GSM, its drain battery ~1%/1h.
Click to expand...
Click to collapse
Yes I overclock my PPC every time a start a game because the 400 mhz processor is not good for games. TYTN has quallcomm which is still not optimized. Try something with samsung processor. My friend has HP RX3115 with samsung 300mhz and even with WM2003 it's reaal fast. Everything starts immediately. I didn't get the chance to test it in games. And about the battery is this ~1%/1h in standby or turned on ?

Incoming ring delay...
Do not use SD for ring files. Use BA memory. For me, work.

Related

Bug / Problem List for the new PPC 2003 ROM

I just want to warn everyone the 2003 rom has many problem, since it is an internal development version. Here is the bugs I found right now.
1.Maybe it's not a "BUG". It miss the Wireless Modem which many people asked for a long time.
2.I tried Windows Media Player and Pocket Music 1.5, both can't turn off the display, which means you have to leave the display on when you listen the music. If any one can turn off the display , please tell us, may be I got some software conflicted.
3. 2 "Power" Logo on the setting menu, but the have different content. It looks like one is the new power setting tab, but it didn't provided some old fuction in the old power setting tab, so O2 kept the old one.
4. The SIM Contacts (Sim utility provided by PPC 2003) is horrible.It has NO fuction except copy the SIM card address to the phone.
5. YOU MUST NOT install Batterypack 2003 on the phone. It looks like working after you install, but your machine will never boot up after a soft-reset except hardreset the phone. (It is PPC 2003 / Battery Pack 2003 problem, not O2 / HTC's fault).
6. You will never know if the current signal support GPRS or not. It will not display the G logo in the "signal bubble".
Please add the list if you got any problem with the new rom.
If the bug I listed can't stop you install the new rom, go ahead :twisted: .
Moreover, it's not an official / final version rom, if you want stable rom, stay with XDA SE 1.1 rom.
Sorry for my horrible english~
1.Maybe it's not a "BUG". It miss the Wireless Modem which many people asked for a long time.
Click to expand...
Click to collapse
Not a bug. it was a feature added by xda-developers.
2.I tried Windows Media Player and Pocket Music 1.5, both can't turn off the display, which means you have to leave the display on when you listen the music. If any one can turn off the display , please tell us, may be I got some software conflicted.
Click to expand...
Click to collapse
tried it with windows media player and got the same thing. Pocket music 2.0 refuses to work at all
6. You will never know if the current signal support GPRS or not. It will not display the G logo in the "signal bubble".
Click to expand...
Click to collapse
when i have grps signal i have G displayed in my bubble.
Alex
kalex said:
1.Maybe it's not a "BUG". It miss the Wireless Modem which many people asked for a long time.
Click to expand...
Click to collapse
Not a bug. it was a feature added by xda-developers.
Click to expand...
Click to collapse
No, it was added in the new ROMs by Qtek and O2. Whether it's a Microsoft or HTC tool I don't know, but it's definitely not ours...
XDA developer Peter Poelman,
didn't know that. i thought it was urs.
PPC 2003
Hi all
Only autentization to VPN over cetificates is good feature for me.
Another features :?
XDA-dev ROM 1.1 is best solution
It seems the "screen toggle" bug (can't switch off the screen probelm) can be fixed by install the PocketMusic 2.0 Bundle plus the 2.0_4_3 fix.
I can see a hotkey to turrn off display with 2.0 version.
Moreover, the "auto turn off display" fuction still works on the PocketMusic 1.5 Bundle version, and 2.0 too.
It's so strange the PocketMusic 2.0 works but WMP 9.0 doesn't work.
I'm happy with the PPC2003 now. If we have to wait to long beforce the official release, will XDA-Developer release an extra SE version based on the current version of PPC2003?
It still suffers fron some sms issues, i cant get a delivery receipt, and also the time sent stamp is actually the time received.
The auto config does not work, so as a result i can't get gprs working...
(Anyone know the settings for o2 uk ?)
All in all though a good upgrade !!
i loaded the 2003 rom and only have minor issues.
1. when connecting the network says voicestream instead of t-mobile.
2. connection seems slower even with the accelerator proxy turned on. the connection used to be as high as 40k according to spb gprs monitor. now i haven't seen it break 20k.
Unit no longer powers-on when placed in sync cradle; In order to sync the unit I now have to either (a) make sure unit is turned-on before placing it into cradle, or (b) place powered-off unit in cradle, then turn power on.
Not a major issue, but certainly a back-step in functionality. Anyone else notice this?
I'm using a TMobile XDA with updated ATT radio stack and PPC2003.
To Dondi :
I have your issue too, but I didn't think it is a problem for me, since I hate the machine suddenly power on itself when I am charging it.
i guess it s even better for the screen not to be lighted all the time when plugged on the cradle
Hey all. I just installed WM2003 PE. It looks and feels great. I only have the following comments:
I have installed the ROM on my Qtek 1010.
1. I can't seem to see any MIDI ringtone support on this one (probably because it's not a final release)
2. I'm still running on my old Radio Version 3.23 and my GPRS resumes connection seamlessly after calls - which is great.
3. I've read somewhere that applications will be visible on the 'taskbar' when running, but do not get this functionality also. No worries on this though, because 'Switch' works fine with WM2003.
4. Still no ability to add custom Operator Logos.
5. Hooray for the 'Busy' tone and indication!
SPB GPRS Monitor works fine with 2003. I also wanted to know from the rest of you guys: Do you have to manually initiate GPRS connectivity after a soft-reset? Or does it pick up your default connection and auto-connect?
To killercheung and Cyberb0b: You've given me a new perspective on the XDA not automatically switching on when placed in the cradle in the off state -- I appreciate the benefits you pointed out.
Also, I did notice that when I initially loaded the Ozone beta (prior to upgrading radio stack) the GPRS symbol was being displayed regularlyand I had no problem connecting with GPRS and getting decent performance (> 20 Kbps). However, after I convinced myself to "go all the way" and also perform the Radio Stack update, I now rarely see the GPRS symbol, and GPRS perfirmance has dropped to the 1Kbps level.
Now I wonder if Ozone also updated the radio (which I perhaps subsequently "downgraded" by loading the ATT RSU). Can anyone shed some light on this?
for what i ve seen Ozone does not modifiy the radio stack, you have to upgrade it yourself useing for exemple the O2 upgrade version 4.21.
As far as i m concern using GPRS in France with Orange as operator with SE 1.1 or with ozone i have the same brandwith capacity depending on the network trafic and my position, between 10 and 30 Kbps, i use SPB GPRS manager to monitor my connexion 24/7 and see what is my data consumption day by day (it also allow me to shut GPRS off without switching the phone off).
by now using ppc2003 for about a week, i have no gprs shut down, except going out of coverage area, we poor french are not full gprs anywhere, but it works pretty good in cities.
on thing i ve notices that i guess is significant :
however it is said that Gprs connexion isn t dropped any more when an incoming CSD call start, that is true but the transmissions are stopped.
I mean i can not send or recieve data while talking on the phone line. But this is not due to the software i guess it is due to the number of channels aviable on the device usually it s 4 + 1 or 4 + 2
whereas phones like SE P800 have 6 + 4 channels allowing the to really exchange data while using CSD channel.
But nevertheless it is a good upgrade cause i do not have to kill my irc session while talking on the phone (just have to hang up fast before the irc timesout ) ).

bugs in ppc2003 ver 4.00.1

After a while the radio button don't show up anymore (control panel -power section).
Link's from program they erase themselfes!!??!!
Can anyone confirm the same situation?
florin_m said:
After a while the radio button don't show up anymore (control panel -power section).
Link's from program they erase themselfes!!??!!
Can anyone confirm the same situation?
Click to expand...
Click to collapse
Nope can't confirm that happening, but I got one even better!
How about your entire SD card getting erased, yeap no warning no nothing just a blank card!
Haven't had any other problems though!
ROM v4.00.01
Radio v6.18.00
T-Mo PPC on T-Mo USA
I get a lock-up on the splash screen after a soft reset. It might have something to do with Battery Bar ap. :?
I'm running it with pocket plus and PI 4.5 as well as SPB full screen keyboard and hasn't had any locks up as well. as for the SD card being formatted i saw this happen to my friend's sandisk 64mb card running 0zone 3 version of ppcpe 2003.
alex
I haven't had any of these problems. Using an SX-56 with Radio A20.10 and ROM 4.00.01 ENG Dated 5/16/03, protocol 324e4. Using ATTWS service.
me too i haven't had any problems. using Qtek 1010 Radio 4.21.00 & ROM 4.00.01 ENG dated 5/16/03, protocol 324e4 using MTCNet services every thing running very well
those of you who are not having these problems are you running the first version of 2003 O2 developers version or the newest one avail here based on AWSbin? :?:
PhoneGuy dont use it i installed Battery Pack 2003 and had a lock up the device wouldnt start again after a soft reset i had to apply a hard reset to get it working again.
Also i have a problem when connecting to GPRS there is no d/c button i had to push long the red close button to d/c my GPRS session after 5 seconds exactly i will loose service signal i have to turn off/on phone to re obtain signal!
any one noticed this?
:?
florin_m said:
After a while the radio button don't show up anymore (control panel -power section).
Link's from program they erase themselfes!!??!!
Can anyone confirm the same situation?
Click to expand...
Click to collapse
No such problems so far. However, here are some bugs I have noticed:
1. The phone seems to have difficulty in re-acquiring the GSM signal after it has been out of coverage for a while. I sometimes have to switch if off and then on again when I get back to coverage.
2. GPRS - The speeds seem better, but there seems to be an issue with connecting to GPRS as the device refuses to connect sometimes even when it is supposedly GPRS-Attached ('G' icon present).
3. I use PocketNAV and keep finding this application 'HTC SAT' listed as one of the running programmes. Cant figure out what this one is.
4. If you go into contacts from the phone screen and close the contact screen without actually making a call, the contact on top of the list seen earlier will appear on the phone screen. On many occassions I thought I had wrongly dialled numbers that I never meant to call, but when I figured this issue out I was relieved that I hadnt accidentally made all those international calls.....
5. SMS WORKS LIKE A DREAM. The name of the contact still appears when you click reply, but you dont have to delete it anymore - the message goes through even if you dont. SMSs seem to be sent much faster, too...
CHeers
I can go into contacts and close it and go to the phone and it does not show the last contact selected. I suspect that this may be do to one of your applications. I have the following applications loaded:
1. SPB Pocket Plus (Latest version that work on 2003)
2. MobiPassword (Eval)
3. Fonix 1.2EN & UL Roger Voice
4. Pocket Plan (Eval)
5. PHM Registry Editor
6. Converter CE
7. Mapopolis
8. Acrobat Reader
9. Access NetFront3
10. Sprite Backup
11. Portmith Ipresent
12. Spamfilter (beta)
13. MidCast (Eval)
14. Pocket Explorer
None of these appear to cause any problems. Only SPB Pocket Plus and Fonix are loaded in RAM. All others on on SD card. I hope this helps.
(See above for ROM Versions)
SD Card Erasing on WM2003 - Solved!
I have also had that problem.
It happened to me TWICE, but after some really lengthy investigation, I have figured out what causes it--
It's the new 'Pictures' application! TURN OFF the 'Detect digital camera' option, and your problem will go away!
Hope this helps everyone. I HIGHLY suggest everyone do this NOW! It's not a good thing to loose an entire 256MB card full of documents and programs!
You the Man, thanks!
I have installed the wm2003 4.00.01 rom Yesterday.
I must all looks good and every ting i use works.
BatteryPack 2003 V5 does some strange things when I have the phone app open.
If I open a speed dail and later the call history, I can't close the call history or the Phone.
When I want close the call history, it will show the speed dail, and when I close this one it will show me the call history.
I will have to press the green answer button to get the phone app back on my screen.
Which I cant close because it will open the call history or speed dail.
Any one any solutions to this problem.
As has been stated by mnay users Battery Pack has problems. I wouldn't advise anyone to load it until you are convinced that these problems have been fixed.
I have noticed one minor inconsistent problem. After synching devise on cradle and leaving it there, after removing it from cradle it soemtimes will not recconect to the GPRS even though a G shows. A soft reboot and it will connect fine. Other times I just wait a while and it recconects fine.
I also noted on another site that was testing connections that in the fully released version it keeps track of your connection time. Nice feature once we get the release version.
I love the fact that email polling really works the way you would think it would now. Even after the device shuts itself off, it continues to get email. I set mine to 5 minutes, so it is almost like having push email. After seven days of usage I am still impressed.
Using the second WM2003 beta, 4.20.1081 build 13100, ROM 4.00.01 ENG, Radio A.20.10, Protocol 324e4, on the US T-Mobile system, my PPCPE is working flawlessly in the North Texas area. I was having severe GPRS problems after the update, but replaced my three year old Vstream SIM with the latest generation and that fixed the problem immediately.
The only inconvenience I have encountered is the fact that Omega One products (Battery Pack and Journal Bar) do not work even though the Omega One website claims compatibility in the product information section. According to the user forums on that site, beta versions exist but are problematic.
As stated by others previously, stay away from their products for now. I miss Journal Bar!
David
AGREED ABOUT WM2003, ALTHOUGH I LIKE THE ALWAYS ON INTERGRATED GPRS ON THE OPERATING SYSTEM SIDE AND CONNECTIVITY FEATURES.
THERE ARE A LOT OF BUGS AND ISSUES, I'M WAITING FOR THE XDA WM2003 SPECIAL EDITION TO BE RELEASED
ANYONE GOT A ESTIMATE TIME IT'LL BE OUT?
DAVE

ATOM Issues...

Does anyone know how to stop the ATOM from changing the view to landscape each time the camera button is selected?... been the same on all roms and the button is assigned to the camera only yet when pushed it flicks the screen sideways, then when exiting it goes back portrait - its annoying and i'd like to stop it...
Also with the *leaked* rom anyone know how to get the clock back up the top instead of the battery indicator which doesnt change no matter how charged the phone is?..
FTR... the 3second delay patch works on *Leaked* rom with MP3's as well as other formats..
Cheers
Cheers
XDA Atom - Issues with new rom
I've just switched from the XDA2i to the Atom and am starting to wish I didn't. I bought this phone on ebay.com/au and it was only 2 wks old, the chap said he no longer needed it for work....probably got hacked off with it being so buggy.
I'm running the new 20060217b1wwe rom with the radio r060221n_mn1arc_rs00045 as the old rom (one which came pre loaded) constantly froze and needed soft re-setting.
The issues I'm having are as follows:
1. When phone is in standby after a few mins the green led stops flashing and it no longer accepts incoming calls and goes straight to voicemail until I press the power button, it then searches for a network and the green light flashes again.
2. When listening to the radio there is a constant buzz in the background.
3. Sound only comes out of the right headphone ( I've seen in another post that this has happened to others, a suggested 2.5mm to 3.5mm adapter was the fix. Surley the headphone which comes with it should work properly!!)
Also are there any updates which sets the phone up with UK settings and not Australian defaults
Why do O2 release phones without fully testing it....it hacks me off.......Anyway if someone could help me out with my above problems before I launch it from the 15th floor of my office building that'll be great
Me too. I've got an Atom few days ago and using same rom and radio as yours. I find 3 problem with it:
1. Green led stops flashing
2. Battery lasted so quick, usually have to re-charge after 10 hours (with only 1 hours talk time, no bluetooth, infrared and wifi.
3. Wi-fi is buggy. After connected, it auto disconnected .
I'll try to re-flash ROM.
Does anyone can help.
I hope you have seen the new ROM (test only) on ftp? Follow the link in the Atom Upgrading section
Did you try "not for sale" version? I'm downloading...
my issues with the Atom
Hi all
I have been using the XDA IIi for the last 1 and 1/2 years, and got this present from myboss...an ATOM. I dont have the same problems, but some are similar I guess.
1.After I receive an MMS, the phone stays connected to the Internet, or rather connected to GPRS/EDGE. After successful downloading, it remains connected. Any ideas why? in the IIi it disconnects after downloading, and also if my browser remains inactive for some time.
2.Synchronization is terrible. Most of the time, when i plug in to sync, there will be an error, then i unplug and plug it back, it may sync. this is terrible. Im using active sync 4.1
3. This terrible phone needs awful lot of reseting. Even to check the System info, i needed to reset the bugger.
4. This is very very slow.. and battery power drains so much. Im only using SPB pocket plus 3.1.1 the oly external software running on the Atom.
My Rom version
20060123B1WWE
Radio version
R060221N_MN1ARC_ RS00045
Aprrecite if any one could advise.
cheers
SPB pocket plus is known to conflict with atom performance.
By the way why have you not updated your ROM to any of the non-official ones floating around? First was the Leaked ROM, and just 2 days ago came the Test ROM, which, in my personal opinion, is tops so far.
Thanks victoradjei for the update.
So guess ill have to remove the SPB for now.
Actually i havn't been around the forum, so have not got real updates from here. Will follow it up.
By the way, is the performance better with the new ROMs.
cheers
the not for sale rom is the best so far!!!try it!
No Sound coming from left earphone.....
Since I posted my issues above i've found that most of my issues were to do with my virgin payg sim. When I inserted my works vodaphone sim I had no connection issues at all. All other quirks seem to have disappeared too....with the exception of the headset problem. I only get sound from the right headset and also I can not use with microphone on the headset either.....I purchased the 2.5mm to 3.5mm adapter and bought some new headphones but to no avail.....Does anyone else have this problem if so how was it resolved??
My Atom green led stop flashing after few minute - always ON (offcouse it is network registered). Is it normal ? Like other HTC green led must flashing when registered to network.
active sync problems...still
I have upgraded to the official ROM realsed by O2 and most of the problems are solved, and i "love" my atom for now.
but as per my previous post, i still cannot find what the crap is about the active sync and the atom. Well, the sync problem is ther still, here is an error it is giving
The server is Buzy
Support code:85010017
is it a problem with my PC or is it the problem with active sync and the atom...
can anyone please help me?
no sync issues
i got my laptop yeserday, and there aint any problems with the sync... cheers
Re: active sync problems...still
sultan said:
I have upgraded to the official ROM realsed by O2 and most of the problems are solved, and i "love" my atom for now.
but as per my previous post, i still cannot find what the crap is about the active sync and the atom. Well, the sync problem is ther still, here is an error it is giving
The server is Buzy
Support code:85010017
is it a problem with my PC or is it the problem with active sync and the atom...
can anyone please help me?
Click to expand...
Click to collapse
Er, did u upgrade from a previous ActiveSync? Remove the ActiveSync installation totally (Even the residual files), and perform a clean install of ActiveSync 4.1.
I find that the old files of ActiveSync sometimes conflict with ATOM synchronization...dunno why.
Hope this helps.

O2 Xda Stealth, Wifi card not detected.

Hi guys,
Inherited a Stealth few weeks back but i realised that the Wireless option (to turn it on and off) doesnt work, nothing happens when i try to turn on my wifi, so i did a hard reset, but after the hard reset, it doesnt even detect or show up my wireless options. Any ideas guys?
What ROM are you using ??? I had a similar problem with my stealth for over 6 months after upgrading ROM....I tried every thing including careful changes in registry ....the problem was only solved after downgrading to the original ROM more than once ....I still get minor problems when WIFI wouldnot load but works after repeated soft reset ....I suggest you try to soft reset few times an see if this solves the problem....best of lucks....
hi man,
Thanks for replying.
I am using WWE_RM061208. Everytime i restart the phone it says, "Unrecognized card in slot" i am assuming this is the wifi card? any ideas? which version rom should i be using? It asks me to enter the device driver/name or something. thanks.
The unknown card is the wifi card....I used to get this notification daily for over 6 months when the wifi was not working .....Try soft-reset few times and if the notification disappears then wifi should work.....Is your ROM Original or cooked???? have you upgraded the ROM at all??
HI man,
Yes i have upgraded the ROM from www.mwg.com but it doesnt really do much, some of the settings still are around. Any suggestion which ROM should i use? What ROM are u using man? I tried soft reseting a few times but it doesnt work, it still comes up.
The ROM from mwg is original and I used it for downgrade from wm6 (YUC)..... is the wifi working when you hard reset the device ????....I used yuc wm6 but because of wifi problem there, I downgraded from mwg and then upgraded again to yuc wm6 from here
http://forum.xda-developers.com/showthread.php?t=352468
Hello All,
Since a fortnight, am observing strange problems within Network (clogs) and Virus Attacks on my Internet Cable based connection. This is a 256 Kbps line.
Problem I can see is:
a) A script or attacked is launched from a remote server/machine. It's domain address is 222360.com. Attacks happened from union.222360.com, s.222360.com and now with v.222360.com.
b) Once the scripts is launched (.js script), it gets hooked within my browser (Firefox 2.0.0.11).
c) Then, my internet activity will be disrupted severely for some time!! (can't open any page). I am using "Adblock Plus" within Firebox to block this script off.
d) Is there is no script, an attacked is launched on the open HTTP ports or on Yahoo Messenger.
e) Ultimately, an attack is made in form or Trojan or Exploit to gain access or to steal information from my system.
I can see the following logs from the NAV 2007 firewall.
I have similar problems with my stealth..
But worse...
My wireless manager only shows Bluetooth and Phone..
No more Wi-Fi thing..
It happen when i downgrade it to WM5,i got it from mwg..
When i'm using Yuc's WM6 sometimes the wifi works,sometimes it doesn't..
So i decided to downgrade it..
But now i can't use my wifi anymore..
I've been Downgrade and re-upgrade it like 4 times and that long processes did nothing for me..
Anyone have similar problems?
Syubidubidam said:
I have similar problems with my stealth..
But worse...
My wireless manager only shows Bluetooth and Phone..
No more Wi-Fi thing..
It happen when i downgrade it to WM5,i got it from mwg..
When i'm using Yuc's WM6 sometimes the wifi works,sometimes it doesn't..
So i decided to downgrade it..
But now i can't use my wifi anymore..
I've been Downgrade and re-upgrade it like 4 times and that long processes did nothing for me..
Anyone have similar problems?
Click to expand...
Click to collapse
I had a similar problem with wifi for over one year . I had to down and upgrade my stealth 3 or 4 times and finally worked alone after repeat soft reset ...another problem is that you may see wifi icon but doesnot work on pressing it...try removing the battery for 6 to 12 hours and restart again...now at this time I did soft reset for my stealth and the wifi didnot load but iam sure it will work after few hours or tomorrow
First of all thank God,because sending this guy(Yuc) to us..you gave a new life for our O2Xda Stealth,like a candle shining in the dark..Trilions thanks to you.
Actually i would like to ask somebody's help about ZiIME.CAB.. i deleted phoneime.dll but still can't delete zisip_Opt.dll.. it said "Cannot delete file ZiSip_Opt:the file may be in read-only memory,on a write-protected disk,or currently in use by another applications"
is there another way to delete this file?
Secondly how to kill "cprog.exe" in Task Manager?
Another silly question is can somebody upgrade O2XdaStealth GPRS Cellular Data Link to 3G or 3.5G..or is there any Booster for Internet connection?
the 02 xda stealth camera. it was its quality built-in GPS receiver, CK3300 adds navigation functions to the benefits of the CK3100 kit. It enables the driver to access wirelessely NMEA-0183 standard GPS data via Bluetooth . Those Data can be used with all Smartphones or PDAs. The GPS output may also be utilised with the Route 66 navigation software for Symbian mobile phones, allowing not just house-number precision navigation but also up-to-date traffic information.
After almost 9 years from this post, my stealth is still alive

Prophet is warming up, battery consuming very quickly, wifi doesn't turn on

Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
try this ROM
hello..
i have the same problem as you are before and since i want to help you better try what i did..
i presumed that you already had HardSPL'ed your device if not follow this link...
http://forum.xda-developers.com/showthread.php?t=350033 if you cant download the files on this link try this one :
http://forum.xda-developers.com/showthread.php?t=310452
and heres the ROM that im using from Cloudyfa ofc credits to him/her!
http://forum.xda-developers.com/showthread.php?t=394991
wifi works well based on my experience the only problem is BT < when you try to receive a file from another device but heres the tweak for that.
using a simple registry edit tool..
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:3
"IsEnabled"=dword:1
btw the radio rom im using is the very recent one.. get it from here:
Prophet_G3_G4_RadioRom_v2.69.21.exe
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_List
hope this helps...
my Qtek S200 is working like a charm now...
WowWow~~~
you are an expert now.........
nishaon said:
Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
Click to expand...
Click to collapse
Did you ever get your problem fixed? am having the same problem but I belive its a hardware problem I have not found a solution as yet but can anyone tell me how to enable WiFi in the Regestry thanks

Categories

Resources