Database Users

WiFi Problems on SPV M600

Hi, I hope someone can help me. I have a Belkin Wireless G router and an Orange SPV M600. I have tried to connect my SPV to the router with mixed results. If I disable my WPA-PSK I can connect with no problems in both B and G, as soon as I re-secure the router my SPV won't connect. I have ensured that the PSK is correct and tried the speeds at only B and only G. In the menu it says that my network is available then after 2 attempts to connect it then says that the network is unavailable. As you can appreciate I don't want to run my router unsecured.
All advise gratefully received
Rolfecat

Hi,
Do you have the same problem with an other device like a laptop ? You may have a problem with you router ?

try using wep or mac filtering or both, both are very reliable. i have had mixed results with WPA on mobile devices (and printers).

I have ran into this problem as well. I have a Netgear WNR834B router ("N" router). I have to set it to b/g in order for my 8525 to connect. Otherwise, it just sits there for awhile saying it's connecting and then gives the same unavailability error.
Hmm.did you find a solution?

Hi,
I haven't resolved the problem with my router. The router works fine with laptops and only my phone won't connect. The interesting thing is, when I go to other peoples houses where they run wi-fi I don't have a problem connecting even with WPA. Thanks for the replies, hopefully someone will turn up with a solution.

in wizard
Others have had the same problem and solved here,
http://forum.xda-developers.com/showthread.php?t=255724
I have been unable to fix with my wanadoo router though.

WLan and WPA

Searched and searched, Has anyone had an issue with using the wlan SD8686 with WPA?
I can connect with no security and with WEP and I am able to browse the web.
I can still connect to the router using any of the WPA but can not get any pages to load in IE only works with wep or no security. 3 other laptops work fine.
Any idea? HTC Tech support no help.

Stealtheo said:
Searched and searched, Has anyone had an issue with using the wlan SD8686 with WPA?
I can connect with no security and with WEP and I am able to browse the web.
I can still connect to the router using any of the WPA but can not get any pages to load in IE only works with wep or no security. 3 other laptops work fine.
Any idea? HTC Tech support no help.
Click to expand...
Click to collapse
I can't answer.. but that reminds me the WPA issue that I have with the HTC Touch ..... my Touch is unable to use any WPA ... when connected the touch just freeze .. and I have to soft-reset and hope to the Wireless not connecting before being connected before disabling the Wireless.
it seems that WPA or the wireless chip is really bad ... but don't know which one !

Shift works fine with WPA I am currently using TKIP+AES

I have had nothing but issues with my Shift and Belking N Router using WEP...
Sometimes it would connect, the majority of the time the shift couldn't see the network and it did connect it would lose connection. I tried it with WEP and also with no security and also with MAC address authentication only. Every 50 times I tried to connect, it would connect maybe once.
So, decided to use my old standard 54g Belking router. Guess what, no issue so far with no security applied. Was planning to try it with WEP later....

faisal.husain said:
Shift works fine with WPA I am currently using TKIP+AES
Click to expand...
Click to collapse
I live in US and unit was from UK think this could be a problem with WPA?
I have no problem with NO security and NO problem with WEP only with any type of WPA. Also searching the net, seems like the wirerless chip in the SHIFT not a very good track record, lots of driver issues

faisal.husain said:
Shift works fine with WPA I am currently using TKIP+AES
Click to expand...
Click to collapse
Can you tell me what the Driver VER No is on your shift tfor the network card?
My unit has the Marvell SD-8686

Wifi
I had problems, sometimes the shift could not find my network, sometimes it woeked.
after setting my dlink dir655 router in b/g moder rather than b/g/draft n mode all has worked so far.

ok guys i use linksys running open source dd-wrt v23 sp2 firmware; works great; i must admit i have not used the shift on other wifi network routers....

No connection
Hi,
maybe someone can help. Since yesterday I belong tot he proud owners. But, but, I can’t get a connection to the internet over my WLAN router.
Router Netgear WPNT834. Whatever I did no luck: either I get the message: limited connectivity or only local Zugriff connection something like that.
No problem with XP notebooks, but with Shift and Vista.
Has anyone an idea what causes the problem? Is it the router?
Do you know any router you can recommend: strong signal and reliability?
Thanks
Settembrini

No issue with WPA here
Hi Settembrini,
So you got your Shift from Amazon.de at the same time as they delivered mine after all
Regarding the WiFi connection to the router, it seems to be some routers / chipsets.
I am also using WPA (with a Siemens SX550i router) and it worked without any problems. The Shift detected an encrypted network with hidden SSID and after I entered the SSID and the encryption password it connected immediately and with a stable connection.

WLAN access
Hi mw65719
yes, more or less same time.
So what is the conclusion? It is my Netgear router WPNT834, why I do not get a connection? Need for a new router it seems!
Thanks!
S.

Yes same here, I just bought the new Belkin N1 Vision router and all other equipment works but the Shift can't even see the the router. I just hooked a netgear router in series with the belkin and the Shift can now see the Netgear..... Was worried for a bit there.... Really annoyed about the shift not being able to see the belkin, the Belkin wasn't cheap.

Hi,
I was not able to establish a connection to my Netgear router WPNT834, then I tried the Speedport 700 V and it worked without any problems, no special settings in Vista neccessary.
I guess you have a different Netgear router than mine.
S.

Qtek 9100 - won't connect to new wireless router

Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2

Qtek 9100 - won't connect to new wireless router

No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2

emaj2 said:
No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
Click to expand...
Click to collapse
Can you find IP Qtek in Belkin.
But have you tweaked QTEK to G?

Hi,
No, can't see qtek IP in belkin.
Tweaked to G? - I did'nt do anything like this. do I need to? How?
I was assuming the qtek was picking up the old router via G.

Answer is in this link...
http://forum.xda-developers.com/showthread.php?p=2941902#post2941902

G1 & wifi internet

I have a D-Link G604T wifi modem. it was fine for my G1 connect to its wifi and connnect to the internet. But then I moved out. That modem can't be used with the new network provider so I had to use the normal modem which the telco gave me.
I wanna have wifi so I connect that normal modem to my D-Link one and use my D-Link to brocast wifi. The the problem happened. 2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
Any ideas?
Thanks heaps...

khoaitaychienvn said:
I have a D-Link G604T wifi modem. it was fine for my G1 connect to its wifi and connnect to the internet. But then I moved out. That modem can't be used with the new network provider so I had to use the normal modem which the telco gave me.
I wanna have wifi so I connect that normal modem to my D-Link one and use my D-Link to brocast wifi. The the problem happened. 2 of my laptops and a netbook are all able to connect to the wifi but my G1 can't as well as my Touch Pro.
Any ideas?
Thanks heaps...
Click to expand...
Click to collapse
What is the security of the AP? WPA2/1 Enterprise? Because that would be your problem...

Sorry, I edit a bit.
2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
I used WEP for the sercurity. I tried without sercurity and it still doesnt work.

khoaitaychienvn said:
Sorry, I edit a bit.
2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
I used WEP for the sercurity. I tried without sercurity and it still doesnt work.
Click to expand...
Click to collapse
Huh.
What IP address is your G1 resolving and does it correlate to your routers settings?
Can you try to reset your router to factory default settings?

GenericNode said:
What IP address is your G1 resolving and does it correlate to your routers settings?
Click to expand...
Click to collapse
How to check what IP my G1 is resolving?
And I did do a factory reset to my modem but it didnt help

Perhaps, you should "forget" the connection, then establish a new connection.

oh, that was the first thing I did. Thanks anyway!

hello, any other ideas? I called for help... help... help

You might want to look in the modem's wifi settings for a "Short/Long Preamble" setting and set it to "Long" if it isn't already.

I had the same problem with d-link DI-714P+.Changing transmission rate to 1-2-5.5-11(Mbps) helped me.