Go here to have a look.
hey, i saw that too this afternoon. wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could could magic a .bat file to change the carrier?
I have a S100 bought in Sweden with rom-version 1.3.00 WWE, anyone tried the upgrade on this version?
Is it possible to first upgrade 1.3.00 to 1.3.148? Anyone has a link to such an upgrade?
Appreciate all feedback!
pell0, try www.smartmobile.se go to the update page and enter your IMEI, if your device is supported wich I think it will be you will be abel to download the package and install it, make sure your device is charged to at least 80% befor starting the upgrade. Write a note here when your done so we know if it worked or not.
Or http://www.smartmobile.se/upgrade/upgrade.aspx for the update page directly.
Damned, why don't we have the same in France ..... I can't find who is supporting Qtek and ROM Updates in France ...
Anyway, what's your opinion before/after an update, do you have a backup and then do a restore or do you start from scratch and re-install all programs.
The reason why I'm asking is that some companys recomends the latter, reinstall all programs instead of doing a restore.
Peter
OK, i have tested works so great with the update, connection with cradle is 5 times faster, i have 1gb card and lots of ppc movies goeas really fast now, but i recomend an hard reset and reinstallation.
After update I experience that the audio quality is soo much better then before, bluetooth seems more stabel and more easy to connect to. T9 Swedish input, yey that is soo much better then before. Anything els... Camera, better but still not good.
If the unit was a 3 on a scale of 5 before, its at least a 4 now.
After update I did everything from scratch. Why? Just feal so much cleaner then to use a backup.
Tnx Badger for helping me out of a dreadful situation. I am pretty satisfied with my new unit.
The only real difference that i noticed was that the device responed a lot quicker and that i have Swedish, Finnish, Norweigan, Danish T9 Dictionaries. However they only apply when using "Phone Pad" as an inputdevice. Other then that, nothing. It´s still the same dreadful MS BTstack and it still have some bugs. I couldn´t restore. Either from ActiveSync nor from Xbackup. Activesync gave me an error about another version and after using Xbackup the touchscreen did not respond, at all. But i was time for a fresh start anyway,
Hello All,
Thanks for your feedback!
Can you please put your ExtROM content on the FTP?
Thanks !
Thanks, I will update my norwegian Qtek s100 later today. I believe the message about the ROM only working for swedish models are BS... I've used ROMs from qtek.nu earlier (Qtek2020) and they always worked great, don't see what could be a problem now...
popsi said:
Thanks, I will update my norwegian Qtek s100 later today. I believe the message about the ROM only working for swedish models are BS... I've used ROMs from qtek.nu earlier (Qtek2020) and they always worked great, don't see what could be a problem now...
Click to expand...
Click to collapse
Crap! Country ID error... well I guess we need the passwords so we can change the ROM..
Yes...
And how is it possible to obtain this passwd, by deassembling the file, or only waiting someone who already have it (Qtek or HTC team ...) ?
My IMEI number doesn't work! Guess I'll have to talk with their help desk. Sigh...
Skip
Confirming that it won't work with german MDA. This has to be resolved somehow....
could anyone please upload the Swedish, Finnish, Norweigan, Danish T9 Dictionaries for the intellipad - i have the imate jam and can not update...but i am interested in these files due to the fact that i am DANISH
Thanks in advance
worx g8 !
only thingy is that the T9 only worx with phonepad "intellipad".
i cant see why it shouldnt work with the keybord as well.. guess they were in a hurry putting it together...its a big bad not have the correct t9 language when introducing a new modell today..
otherwise im happy with it.
Updating right now, but it doesn't look good!
Well, after reading about this new firmware, I was thrilled!
It will fix some of the few faults I've seen in the S100.
And now, I've downloaded the new firmware, the installation guide, I've backup'ed my old sms's and contacts and done everything I needed to do.
Started installing. The program checked old firmware, gave me the green light and I pressed "Next".
Now it says:
"Checking the information on your device... Please wait...
Please don't disconnect bla. bla. bla."
The thing that concerns me, is the fact that it's been saying that for 10 minutes now, and the computer isn't doing anything (No CPU- or Harddrive-activity).
All the display on my S100 says is "USB" on top and "v1. 00" at the bottom.
If anyone who has done this upgrade could tell me what is supposed to happen and how long it takes, I would appreciate it alot!
Thanks!
Hi,
I recently upgraded my Blue Angel (Yes I know this is a Magician thread!), but the problem you described it exactly the same as what I had happen.
I found that it only ever happened (hung/froze) if I tried to flash it with the SD card in. Not entirely sure why, but whenever I did it without it in it worked fine.
Anyway, you should be able to safely remove the phone from the cradle (it hasn't started yet anyway if it still says USB...). As you remove it it'll change to Serial, but that's fine. Leave the program on the PC running.
Things to try:
First just take out the SD card and see if it works again when you redock it.
Failing that hard reset it (should come back to the same Serial/USB screen) and redock that. If it still doesn't work, then take the battery out, wait 30 minutes or however long it takes for a Magicians backup battery to die (about 25 minutes on a Blue Angel) and then put it back on. If still not working kill the program/reload it, but I'm sure you'll have it working way before that.
Obviously I'm only saying what I've seen from my BA, but it doesn't seem that different. Also I've yet to see one person permanently fry their phone on here so I wouldn't panic yet (if you were - which I know I was!)
Hope that was some help!
Hello everybody...
First of all, i'm french, so, sorry for my bad english.
Since some days, the backlight make me crazy... Randomly, when i turn off the screen, i can't turn it on anymore but if i remove/replace the battery.
Today is the first time where i have this message (MicropERROR, please, upgrade Firware, or somthing like that).
I've made some research, the Diamond had this probleme, but, there was no fix, it was a hardware problem, so, my only solution is to send my Blackstone to HTC tech support.
I dont expect solution, this thread is to inform you about this problem, it has been arrived on HTC Diamond, it could appear on HTC Blackstone...
ROM FRA stock, haven't tested hard reset, because according to some posts about the Diamond, it's useless.
Cordialy.
Hi you all,
Half an hour ago I noticed that my 914c screen had suddenly gone off. Keyboard lighted on input, so I decided that this might be caused by an erratic program or so and soft-resetted.
On reset I was presented with a system screen reading "Matterhorn Diagnostics - SA DIAG d3-0.2 mAY 14 2008" which I had never seen before. Below it, a number of technicalities -the first line was SDRAMQuick- that suggested that some tests were going to be made, but nothing happened for a while. I googled for Matterhorn Diagnostics and only found three entries, two from the dreaded HP support forums and another one from a Czech site nearly as useless for me.
So I took a deep breath, crossed my fingers and soft resetted again. This time the iPAQ started with no problem at all, and everything seems to be working OK now. I am running the excellent Simplemente Norax ROM by the way.
As you may understand, I am concerned about what could possibly be going on. So, I have some questions for you:
Has any of you ever experienced anything similar?
Is there any diagnostics suite I could use to determine if any hardware is faulty? Also, any antivirus you would recommend? And finally, which is the best way I could backup my system for a complete restore in case that I decide to hard reset? I'd hate to spend a couple of days installing stuff like I had to do past May after an unpleasant encounter with the SRS WOW drivers.
Any help or advice would be appreciated. Thanks a lot in advance!
hi nice guys! I have a opal at about 2 years, it ever worke fine, but for a few months ago, It started to work strange, it started "quickshutdown.exe" i tought it was a problem from the rom (using pajerm one) i've downgraded to the original one, but the problem stayed there...today I disassembled the phone started it with just the board and lcd fixing the battery with my hand to see if there is a problem with the cover power button, but nothing done, the problem keeps there... it acts like the power button were stuck always pressing.. anyone had something like this? any solution?!
Thanks all of you! For this forum i keep watching everyday!
Ps: Sorry for my bad english
wick3d68 said:
hi nice guys! I have a opal at about 2 years, it ever worke fine, but for a few months ago, It started to work strange, it started "quickshutdown.exe" i tought it was a problem from the rom (using pajerm one) i've downgraded to the original one, but the problem stayed there...today I disassembled the phone started it with just the board and lcd fixing the battery with my hand to see if there is a problem with the cover power button, but nothing done, the problem keeps there... it acts like the power button were stuck always pressing.. anyone had something like this? any solution?!
Thanks all of you! For this forum i keep watching everyday!
Ps: Sorry for my bad english
Click to expand...
Click to collapse
bro i think it is not software problem or rom
maybe it refer to hardwares
so it's better to show your device to a an expert
best act as i think
thanks! i wanted to see if anyone had something like this... it was the gameover to the phone, i got on touch pro and one LG with android so im not gonna repair it anymore...
thank you anyway!
hello guys,
at first: iam polish and live in germany. i learn english at school but i think its not good enough that i can say my english is perfect so sorry for mistakes oder for some phrases that you dont unterstand.
here is my problem:
i had android with the nand method on my phone installed since 5 months.
it works perfectly without mistakes but since i think thursday i have a big problem.
when i lock the screen, i cant unlock it.
my display is not responding. i must take off the battery and turn it on again.
i thought: maybe this android version has an issue or so, so i installed an other version....same problem
at the end I was so desperated that i installed windows mobile ( a stock htc rom), but....THE SAME PROBLEM!!!
i cant unlock my lockscreen after i lock it...what can i do? is something wrong with the display? but i cant imagine this...because the display works perfectly without mistakes...
I have exactly the same problem. It started today and my suspicions are that this is a hardware problem.Otherwise I have no idea why on 2 different OS have this problem.
Check here http://forum.xda-developers.com/showthread.php?t=991996&highlight=lockscreen
Hey i had the same problem a while back with my old hd2, the problem had to do something with the screen digitizer, i guess after turning on and off the phone when testing different os caused it to get messed up, so your digitizer might need to be replaced.