I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Hi need some help! i changed my qteck s200 to dopd rom and now i want to get back to the qtek rom but its not letting me, it keeps coming up with errors!
Any help would be great!
and does anyone know if changing the rom of your devise to one which is different, voids your warenty!
http://forum.xda-developers.com/viewtopic.php?t=52244
oh NNNNNNNNNNNOoooooooooo
I just went through that link you gave me and followed the 10 steps it completed the first step and when it said to soft re-set i done it and my phone just does not load it stops at the dopod enjoy mobility sign!!
i have tried hard reset too and nothing works
Help help help!!
what shall i do??
Latest update: http://forum.xda-developers.com/viewtopic.php?p=363228#363228
Let me first say: I am unsure if my SIM is now unlocked and if it has a CID check. Therefore I'm unsure if the info in the related topic http://forum.xda-developers.com/viewtopic.php?t=62496 applies. Therefore I'm posting this new topic.
I recently got a Orange SPV M600 which as far as I understand is a HTC Prophet. I am totally new to PDAs but wanting to use it with my T-Mobile sim and with a fair amount of computer knowledge on board decided to unlock it myself using imei-check.co.uk/m600unlock.php
I ran the program and it said the sim was succesfully unlocked. However when I tried to power on the device after that, it was stuck at the 3 color screen only displaying the values:
IPL 2.10.0001
SPL 2.10.0001
This gave me quite a scare because the device is brand new. Soft and hard reboot bring me back to the same screen. This morning I tried running the tool again and the unlocked failed giving me a message that key / imei do not match. After rebooting it now also shows the value RUU at the upper right corner of the screen.
I read some of the posts on this forum and did a little research on Google. I think I know what my next steps should be but I'm terrified to toast my M600.. I already fell in love with it! Could you guys give me feedback before I try the following?
* Download and unzip:
xda:[email protected]/Prophet/Shipped_Complete_Updates/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
* Follow the steps on http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Should that work?
PS: what does the RUU value mean and why did it appear after my 2nd try?
Thanks in advance guys!
Have you tried contacting IMEI-check's support?
RUU is. IIRC, radio unit upgrade and it should not have appeared.
Don't flash the rom, you might need to send it back to orange / HTC and there is no official orange downloadable rom as yet so if the device boots to 'dopod' or whatever they'll know you've messed with it. If the key does not match sounds like the unlocking has screwed your imei. Does the IMEI the app now recognises match the one you paid for the unlock for or the one on the back of the unit/ box?
Richard
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
MeneerPaul said:
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
Click to expand...
Click to collapse
Typically helpful....
I do not think it co-incidence that you are doing a flash operation ( unlocking) and now the device will not boot. It should reboot after unlocking according to their documentation and if it went to the tri-colour screen something was amiss after the unlocking then, quite possibly becuase of it. The unlock completed succesfully the first time then?
Don't flash the dopod rom, if the IMEI now has a mis-match you may need to send it back to orange for repair / reflashing. They will be able to tell if there is a dopod rom on there and may refuse warranty - I wouldn't mention the unlocking if I were you. There is no official orange rom you can try :-(
Richard
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
MeneerPaul said:
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
Click to expand...
Click to collapse
In the UK at least you do not need a receipt for the phone - it is based on seriel number.
http://service.htceurope.com/
Once you have tried flashing the other roms they can tell you have been flashing it and may not give warranty service, but hopefully all it really needs is a rom anyway. My warning is just in case it is not the rom that is the issue and you need to send it back.
When you run imei-check's app now what IMEI does it give for the device?
Richard
Good question, I just checked and the IMEI in their tool gives me the same one as I wrote down before the operation. It is the same as on the box and as the one I payed for to get the key for and used the first time around.
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
MeneerPaul said:
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
Click to expand...
Click to collapse
Get back to IMEI-check and ask for more help? They may claim that the unit was faulty before unlocking but if so how could the unlocker run? Or try posting at www.modaco.com to see if anyone there has any ideas.
Which country was the device supplied in? Did you check the seriel in the link I gave? If it's from the UK you could send to a friend or collegue to return under warranty without paperwork ;-)
Sorry.
Richard
Well at least we made progress, a hard reset now let's the device boot but.. after I went through the settings I pressed start and it automaticly powered off.
I then inserted my T-Mobile simcard and rebooted again to find myself in the tri-color screen. Another hard reset once again let me reboot but during the boot of Windows Windows it says 'Data crashes. Please contact your service center.'
Where in the Netherlands do you live?
I have succesfully dopotted two M600 phones and I have had one repaired by Orange, for broken speaker. They did not seem to care that I flashed it to dopod.
I might be able to help you out on this one.
send me an e-mail on [email protected]
Thanks,
Robin
O, and I unlocked both also....
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
chowdary said:
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
Click to expand...
Click to collapse
How did they try to unlock it?
Richard
hi
i couldn't speak to the guy who tried to unlock it, i spoke to his collegue and all he could say is that he tried to unlock by logs
now he couldn't tell me what did he use
i have tried to hard reset it but it comes back on that screen
:? :? :?
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
robincop deel 2 said:
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
Click to expand...
Click to collapse
thanks for your reply
it will be very helpfull if u could give us the link to download this file
as i am new with pdas
thanks
Read the prophet forum. You will find the link there in a few seconds.
Success
after doing search this is what i found
RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
please could u tell me if that is ok to flash
the other thing is i can't connect to the pc
active sync is not picking up
phone is stuck in three colour screen
and all i can c is
IPL 2.10.0001
SPL 2.10.0001
any idea for that
THANKS
you should load:
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
Hello All
I have One SPV M3100 Here When power up it just Stays at Windows Mobile Screen cannot go further....Person says he tried to unlock at home using the Unlocked Radio (HTC HERMES RADIO FOR SIMLOCK V1.16.00.69)....
What to do now to repair it back ..???
Kindly reply Urgent help needed....
I tried to flash that unlocked radio again it stops at 39% all the time.....i tried 3 times but same.....
Not sure if it would work but have you tried a hard reset?
If that doesn't help see the Wiki it will tell you how to repair this type of brick. If it is in fact a brick
Hello,
I have an unblocked SPV M560 (HTC3300).
Few weeks ago I have installed the B&B rom with WM6 on it. Now I would like to install the adinfinitum rom (http://www.adinfinitum.fr/wm6_gps_m6...d_and_the_ugly) to solve the GPS problem we can have with the M650 but I cannot flash anymore.
Here are some explanations:
After starting "start_uspl.exe" I get the Linux screen then the RUU application starts on my PC. RUU is trying to connect to the device but after few seconds it displays the error "ERROR[260]: Update error".
After this I tried to restart the pda, wait for Activesync connection and try to restart RUU.
This time RUU can connect, I can see the grey screen on the PDA and it starts updating... but after 2% I get a black screen on the PDA and RUU displays the error "ERROR[270] Update error".
I'm now reading this forum since 2 days and saw that other people already had this problem but I did not find any working solution.
Does anyone of you have an idea of what can I do to solve this problem?s
Thanks in advance for your help.
Alain.
REad this...
Remove sim and mem card from phone use clear storage to clean phone memory then again try start_uspl.exe wait to 100% finsh do not disconect phone and run then romupdateutility i hope that this can help mine problem is resolved and i flash spv m650 many times.
Hi, i have similary problem, when i try re-install WM on my xda orbit 3.15.118 i have alert : flashing error check your update utility..when i try install another WM6 i have alert : error 270:update error
battery full charged
anyone help me ;-)
Hi,
I finally managed to do the update. The only difference is that when RUU has started after getting the black screen I clicked on the cancel button.
After this I let the terminal with this black screen for few minutes (about 5 minutes) and starts again the RUU application.
And this time is works... don't ask my why, maybe it takes some time to the terminal to be ready to accept connections. At least now SPL 1.1 is installed and I can upgrade. My GPS is now working
Thanks
Alain
Spv m650 arte100
when i run the start_uspl.exe i have this window after the run
No Device Connected
Would You like to try copy again?
YES NO CANCEL
boy my SPV is in bootloader mode and i can't riun it in different mode
i have IPL 3.15.0001 and SPL 3.15.0000
What i have to do ???
PLEASE HELP ME