Related
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2¢...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
Hi.
Anyone with same problem. I only have seen it on vista side. Working with 3g conectivity. One minute is connected with tray icon showing globe. Then 30 isnt connected with tray icon showing computers with red cross. Then again connected 3 minutes. It seems a problem between vista side and internet sharing service from snapvue. I ve seen this issue in other spanish shift. Maybe a spanish version problem? any idea?
Thanks
Not much help I know but see my thread titled 'continued vista connection problems'. Have you been using internet sharing to gain access to WM 6.0? i noticed Activesync was always starting on the snapvue side which I think is linked to the constant disconnections.
A full restore from the restore partition solved my problem and I now get a steady 3g connection.
Thanks for your response. Not alone now. Format is a solution but we should know the origin of this problem. Obviosly is related with the way connects to 3g, this is, using Internet Shared connection with snapvue...but...why suddenly activesync (client or server part) tries to connect the other side and breaks the internet shared connection? any idea?Did you install sp1? is your shift language english or other one? ( I am trying to discard sources of the problem).
pd. While I write these lines on winmo side I can listen vista side sounds (connect/disconnect each minute...)
Hi,
I did some changes and It seems (by now) the problem is solved. I ve playing with continous 3g connections. This is what I did (I dont know which one did the trick).
1) Disable activesync usb connections for both sides( I did it for vista side days ago but know I did too in snapvue size.
2) Sevice Sync bluetooth Server stopped and set manually.
3) Reset both sides
Now I ve a stable 3g connection....
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
gavmiller said:
Daniel
Glad you got it working. What do you do to disable Activesync on the Snapvue side?
I only noticed this problem after installing SP1 but I was working mostly with WIFI so cannot be sure there is a link.
Click to expand...
Click to collapse
Hi.
The problem is solved, now for sure. Open Activesync in winmo,then menu/connections and uncheck "use usb ...". I removed too the partership between both sides althought It isnt important, I think...
Thanks Daniel. Good to know incase it happens again.
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
danielherrero said:
Today I am having the same issue...mmm, I dont know what else I can do. I will post the events I can see in the event's viewer....
Click to expand...
Click to collapse
Hi Daniel - are you still having these problmes?
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
danielherrero said:
Hi. I didnt have that issue anymore. I removed the partership whith the device on vista side. I remove "Usb connection option" on activesync in both sides. I uninstalled "Remove NDIS Share connection" (Device Manager) on vista side and rebooted. Then on restart vista recognized again the device(Remove NDIS Shared connection) after some minutes(5-10 min) and then all worked correctly. I think the last step did the trick. But I am not free of problems. Like I told before when I resume the device and It was hibernated/suspended for a long time (several hours) the 20% of times It cant connect 3g and even I cant restart vista but keeping pressed the power button. So, by now, If my device is going to stay suspended for a long time (night) then I turn it off......
pd. When I need connect vista and snapvue I turn the phone off. I enable usb connection in both sides and use usbtools. After using the connection I undo these steps and all works correctly by now (last 3 weeks).
Ensure too that Vista hasnt setup a new Windows CE device on Device Manager. To check it open Device Manager, then "See devices by connection" and check each usb connection. If you see any Windows CE device disable it. I think both Remove NDIS Shared connection and a Windows CE Device was fighting for the same usb connection (In my case)
Click to expand...
Click to collapse
OK, the only bit I hadnt tried was the uninstall of the NDIS in device manager. I'll give it a go and see what happens. Thanks again for this reply!
Thanks Daniel for your detailed description on this problem, which I also have. Interesting thing is that for me it only occurs when I am on the move with my Shift. No problems when my Shift remains on my desk (like others described in this thread: http://forum.xda-developers.com/showthread.php?t=381220&page=2 )
On your described solution: I removed the Vista/Snapvue partnership and the usb connection on both sides. But I am not able to do the next step: "Remove NDIS Share connection" in device manager, because it's not there (see attached screenshot). Does this mean it was never there, so I do not have to uninstall it? Or is there a different way to find it?
Hi.
Reset Vista to ensure It boots correctly. Then wait to be 3g connected. Once you are connected the device "Remote NDIS shared connection" should be there under network cards. Then uninstall it and reset again. Once booted you have to wait several minutes until vista detects it again and installs drivers.....
pd. And try to contact HTC. Maybe (only maybe) if HTC is reported with same problem from many people they releases a fix.....
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Pfeffa-rah said:
Hi there,
That did not help at all!
Waste of time.
But thanks for the hint.
What DID help for me was closing WMDC through taskmanager.
When you just exit WMDC, task manager still shows that it is running there in the background and apperantly scanning your ports for mobile devices ore something.
I stopped it from running and have a stable connection now.
(replying from train right now)
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Hi
Do you have to do this each time you start vista?
Cheers
firedup said:
Hi
Do you have to do this each time you start vista?
Cheers
Click to expand...
Click to collapse
I think you only have to do it after you used WMDC. On my shift it doesnot start at boot (not anymore...) If I want to sync shift or my kaiser, I need to startup WMDC manualy.
grtz,
Pfeffa-rah
My experiences so far.
Is it possible that it is the energy plan that is responsible for the loss of connection. I installed SP1, no problems it seemed. Today I wanted to use the 3G connection with the battery (balanced energy plan). And then it started to disconnect and to connect in small intervals. I did the routine Daniel described: uninstalled NDIS driver. Reinstalled it but connectivity problems remained.
Is it something to do with the battery powered system?
Because, as soon as stop using the battery, plugging in the power adapter again everything seems to be okay. I am not sure about it, but I think, when I use the max power option with the battery the connection stays and fails when I use the balanced energy plan.
So can it be that something in the energy plan is responsible for the loss of the connection?
Experts, does that make any sense?
I will give it some more tries.
S.
I had the High Performance powerplan on all the time......
had it to
Hi
This is a problem when sp1 is installed and you are using 3g in vista being in balanced or power save power plan. it has nothing to do with activesync and usb ports (i have never had a connection)
i called htc yesterday, they clamed they had never heard about it before, so please as many as possible call htc and tell them then maybe just maybe they would release a fix
in rhe meantime i uninstalled sp1 and everything works
In my case the solution is quite clear.
3G works in Balanced mode and in High Performance when power is plugged in. I am not so sure if it works in “Power Save” even when on power.
3G does not work when either on “Balanced” or “Power Save” when using the battery. Battery works in “High Performance” even when all the options are set like they are in “Balanced” mode.
This I found somewhere else in the forum. It is from Daniel and I guess he says the same, more of less.
Well. I ve been doing many tests and changes and I thing the sd, suspend crashes and 3g closed connections are gone.
I use equilibrated energy plan but I hadn’t any issue when ac connected so I ve modified this plan to make equivalent the behavior when not ac connected, but not success. The problems are still there. Its incredible because the configuration for ac connected/disconnected is the same I ve modified all the parameters (usb, expressPCI, , etc)
So I ve set High performance plan and I ve modified it a little bit, only screen brightness when no ac connected and now all works correctly. I start the system (no ac connected). Then I suspend / wake, hibernate/resume the system several times being ac no connected and the problems are gone. 3g connection is very stable. No crashes from standby to hibernate state. No sd missing problem. So by now I will keep in this "High Performance" modified state
pd. So It seems that a plan is compounded by customizable parameters by the user and hidden parameters)
Now, those who have not installed SP1. Is this really no issue for you? Or have you always been on power or always used “High Performance”?
Well, even when I plug in my external battery and the green light indicates that the machine has been plugged to power, even then it only works in “high performance” and not in the two other modes.
Very strange!
S.
Hi all. This is my first post to this forum.
I've received my HTC Shift two days ago and i'm very impressed. It's a fantastic machine for all my mobile needs.
My only trouble is the HSDPA connection. How can i disconnect the mobile link when not in use? This morning the COMM Manager told me that the connection was active by 23 H! I have a data plan with H3G for 5GB weekly but i'm concerned about the battery life and the roaming.
If i connect under my operator and then i move under roaming, the connection link is closed automatically?
Thanks in advance to everyone
Regards
Fulvio Cristallini
fulviocri said:
Hi all. This is my first post to this forum.
I've received my HTC Shift two days ago and i'm very impressed. It's a fantastic machine for all my mobile needs.
My only trouble is the HSDPA connection. How can i disconnect the mobile link when not in use? This morning the COMM Manager told me that the connection was active by 23 H! I have a data plan with H3G for 5GB weekly but i'm concerned about the battery life and the roaming.
If i connect under my operator and then i move under roaming, the connection link is closed automatically?
Thanks in advance to everyone
Regards
Fulvio Cristallini
Click to expand...
Click to collapse
Bro, just turn off the modem under comm manager...that would solve it....
If you wish to keep the modem turned on within the WM side and not have your Vista side using your precious GPRS\3G\HSDPA, disable the Remote NDIS based internet connection in 'Control panel 'Network Connections' and just re-enable when you actually need it.
Vista will only use wireless from then on when it is enabled and connected but you can still use SMS and Email from WinMo.
BTW, for some reason, you may have to Shutdown and restart Vista for it to become viewable within 'Network Connections' again.
Hi everybody,
I have the following problem: when my htc x7500 is connected to my office pc via ActiveSync no internet connection is available on device. As a result the following operation are not allowed: update weather info, update gps satellite data and so on. On my office pc everything seems normal, synchronization works fine and I can see the device's local area connection icon on the iconbar which seems to be able to exchange data regularly.
My OS is winxp and on the device I had installed WM6 and now I have WM6.1 and both windows mobile os had this problem.
Please can someone help me finding a solution?
Thanks in advance,
Willy
check
enable advanced network functionality
in usb to pc
in settings->connections
Me too
This does not work for me on my Touch HD, worked fine on my previous TyTnII with WM6.1.
My activesync version hasn't changed, only my phone.
Tried enabling the 'Enable faster data synchronization' but it still doesnt work.
Has anyone resolved this ?
Have you tried uninstalling and reinstalling ASync?
I've had this problem in the distant past but can't recall off-hand how it was solved, though I would have tried to reinstall.
you can also try to go to settings->connections-connections->advanced->select network
and choose my work network in the dropdown
thanks all for your hints. The activesync re-installation did not work. Now I'll have to wait until monday before trying settings->connections-connections->advanced->select network.
I'll let you know.
I needed to do this regfix to my windows os (compatible both with activesync and wm device center)
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I've tried all suggested workaround without success
I think there is someting wrong with my office pc configuration because in the past I was able to access internet from the device and I can't remeber what changed after that...
I have at present exactly the same problem. Did you or anybody else find a solution?
Thanks for any support, Siegfried
On settings- usb conection try to disable advanced network functionality
Hope it helps,
cursor said:
I needed to do this regfix to my windows os (compatible both with activesync and wm device center)
Click to expand...
Click to collapse
I have this issue at the moment, and I am confident it is to do with how this one PC is set-up as I get connectivity through other PC's on the same network. Have no idea how to repair or troubleshoot...but could not find this fix in the registry...
Any help greatly required....
having this issue too on my touch HD , i cant connect to orange wireless internet (mobile internet)
Try the registry edit suggested above. I am running XP and it works for me.
Hello everyone,
I have done some research on Google and with the forum search here, but couldnt find out if this is a known issue:
I am using WM pro 6.1 on a Samsung i780. The device has a working internet connection (Internet explorer, connection to exchange server ... all works flawlessly).
When I enable internet connection sharing and surf on the connected laptop this works for about 40 seconds to 10 minutes, then the connection breaks up. I haver to hit "Connect" again on the device and after 10 seconds I am connected again. Of course this is extremely frustrating.
I checked this behaviour with 2 different laptops, one running WinXP, another running Windows7.Same behaviour. So the problem must be with the device and internet connection sharing on the device. The connection is via USB cable, so it ought to be very stable.
Any help would be greatly appreciated. What would be the next steps? What should I try to find out?
I actually know a bit how a computer works (I wrote an even rather successfull computer chess program a long time ago ) but this I can't solve. It is important for me, because I seldome use internet at home and if I can get this to work I dont need another internet connection (saves me 20 Euros a month!)
Thanks again!
georg
to simplify
basically I can imagine the following steps to bugfix:
- is there a debug file in windows mobile 6.1. where it writes info about the internet sharing? then I could check there why it disconnects.
- if not, is there a utility for windows mobile which maybe allows more stable connections opposed to the built in connection sharing?
- should I try updating to 6.5.?
Again: Internet on the device/mobile phone ist stable (!). What disconnects is the "INternet Connections Sharing" even though that is via a USB cable(!).
Thanks.