Hi All
This is the first HTC phone that will not "remember" the bt connection to the integrated Land Rover phone kit.
Is there anyone who can get/extract the Hermes or Kaiser bt driver so that it can be installed on the TC?
Or
Is there any news regarding an updated driver from HTC seen a few posts reporting BT problems?
Related
Hi, I've planned to by the new XDAII i (in Belgium the Qtek 2020).
Does anybody can tell me if it is OK with a bluetooth car Kit? With the XDAII normal, I have a lot a Bleutooth problems that I hadn't with the Mini.
Thanks for your answers.
I've had no issues with the BT on XDA2i, other than my old headset wouldn't work with it - something i've now discovered was probably more to do with the headset than the phone.
All other aspects of BT work a dream.
Cheers
Ant
PS - XDA2i uses a Widcomm (now Broadcom) BT stack, not the MS one as used on the 2.
Still can't get my XDaIIi to send files via BT to my laptop! :evil: I tried it with my old XDA 2 and it works a treat........
Someone please help, i don't know how many times i've posted this topic
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
I finally found out that there is a bluetooth patch for Windows Mobile 5 that fixes the problems in connecting a GPS-TMC Mouse 5843 with an o2 XDA Mini / HTC Wizard via Bluetooth.
A can't find it anywhere, do you know where to find this .cab?
Basti
This Bluetooth patch for Windows Mobile 5 and the HTC Wizard should resolve problems for most Bluetooth GPS Mouse Connections, not only for the GPS Mouse described above.
According to a o2 technician it used to be mentioned somewhere here in the forum, but after an hour of search I couldn't find it.
Hi,
Having problems with Address book sync with my new Touch Dual (orange Rom) and my Ford Mondeo Convers+ Bluetooth Handsfree kit. I did have the same problem with my work Hermes (also Orange M3100 Rom) until I did a Rom update to Schap’s 4.20+ Full Rom a couple months ago. Since then all works fine even without ‘JETware Hands-free Extension’ being loaded.
Checked for ‘SAP Access’ /’ Push Obex’ and both units are set the same.
I’ve checked both devices and they are both running the Microsoft stack shown by looking at the Bluetooth ‘HKLM\Drivers\Active’ driver registry area.
Does anyone know of a fix or have a idea?
Thanks in advance,
Crammy
I have a Focus, with the same Ford car kit.
My Hermes also couldn't transfer contact info to the car kit. I tried a variety of ROMs, enabling BT SAP and OBEX on each. It was only when I changed to Schaps 4.30 that it worked.
I can only assume that the Ford system is very picky about the BT SAP version, and only the very latest versions will work.
I suspect you will have to wait until someone releases a Niki ROM with a compatible BT SAP in it.
Hello, I just bought my new HTC Touch Pro. I noticed that when I use my bluetooth handsfree it connects with no problems, but after the first telephone call (few seconds after terminating the call) the hands free bluetooth connection drops and the handsfree is left "in the air". I have to shutdown my handsfree bluetooth and restart it to automatically connect to the HTC TP. Next call comes, hang up, bluetooth connection dead again...
Previous phone (ETEN Glofiish X650 never had a problem with my Sony Ericsson BT hands free). Has anyone found any solution?
Dimi
I have same problem on Polaris after upgrading to Official WWE 6.1
What radio are you using?
Same Problem with Excalibur
Hi juys.
Sorry about wake this thread but i have the same problem with my HTC s620 "Excalibur" when connecting to Nokia car hands free speaker.
Wonder if there is any Solution for this issue
Windows Mobile 6.5 3VOL ROM
Radio 4.1.13.34
I'm sorry to report that this issue is also exhibited with the following headunit and phones:
Head unit: Kenwood DNX8220BT
Phones:
HTC Tytn2 with WM 6.1
HTC Tytn2 with WM 6.5
HTC Touch Diamond with WM 6.1
Sony Ericsson Experia X1 with WM 6.1
A simple dumbphone like the Nokia 6233 will work perfectly but all above WM smartphones are having trouble.
Also HTC S-740
It seems that this issue started since WM 6.1 Does anyone know what changed in the Bluetooth stack?
Microsoft Blames the headunits. Funny thing is that the Kenwood unit is listed on the Bluetooth SIG website which in turn is used by Microsoft as a reference.
On the MS website there are a lot of references to the jetware software but I have tested it without any positive results.
I've seen a post where someone reports that the installation of MS Voice command solved the issue. I will try that on the Tytn2 with WM 6.5
Within a few days I should be receiving the HD2 as well. I'm keeping fingers crossed..