Related
I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
fulgerul said:
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
Click to expand...
Click to collapse
Is it the Bootloaders screen(Tricolor) with IPL/SPL or initial loading screen with ipl/spl ?
What ipl/spl...? it displays at the moment ?
You can try to get into Bootloaders mode (tricolor screen) by pressing and holding down the camera button and press the Soft Reset button at the same time with the stylus or turn off the phone and while pressing and keeping holding down the camera button,Power On the phone,it'll wake up and go into Bootloaders (tricolor screen).if it goes into bootloaders,connect your phone to the pc via usb and check if small usb appears at the bottom of the bootloaders screen,if its there run the Ruu to flash,But first post your present ipl/spl..? here.
Cheers
hmm , this is from XDADeveloperWiki
Once the flash is done and your Wizard is rebooted, it will display an IPL of 1.xx and an SPL of 2.xx.
Click to expand...
Click to collapse
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
zabardast_1 - many thanks for the quick reply mate. it starts with the ipl spl screen. i wrote the values above.
i get it into bootloader with the camera + on button , bot the active sync on the systray , doesnt activate, it remains grey (like no device is connected). weird stuff.
yesterday i just upgraded a g4 wizard to wm6 and everything went smooth , an now
fulgerul said:
hmm , this is from XDADeveloperWiki
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
Click to expand...
Click to collapse
ok,after flashing button's rom or xda_mini you'll certainly have an ipl/spl 1.xx,cuz these roms have actually ipl/spl 1.xx,they are aku 1.xx roms,it's required to have ipl/spl 1.xx to use lokiwiz02b tool to SIM/CID unlock the phone,only then it can be upgraded to any wm6 roms.But to upgrade to wm6 its essential to have ipl/spl 2.xx,so to get to ipl/spl 2.xx,you have to flash your phone with T-mobile 2.26,then it'll show an ipl/spl 2.xx as required,ok
Cheers
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Activesync will not work in bootloaders mode,bootloaders cut off the activesync,you can only verify the connectivity between your phone and pc,if in bootloaders,connect the phone to the pc via usb cable and check if small usb appears at the bottom of the bootloaders,if its there then just flash the rom,there's no need to establish connection through activesync,ok
fulgerul said:
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Click to expand...
Click to collapse
YES ! first of all you got to have a working OS on the phone to activesync,only the you can perform with lokiwiz02b,ok
ok , so what should i do in order to start it succesfully and use lokiwiz. i cant find an original o2 rom and button rom or launch rom doesnt start my phone. what can i do ?
the o2 roms were deleted from xda dev ftp
ps : mate , if u r kind , log in to yahoo or msn , i m trying to contact u . ty
after a lot of searching and digging, i found the missing xda dev ftp O2 original roms . i flashed Xda_MiniS_LaunchROM_v154102 , everything went ok , same result. doesnt pass the ipl spl screen. tried RUU_Wizard_1050402_101_11210_O2_ENG and same thing. im getting really confused. my pc responses when i connect the wizard, it flashes with no errors , but it wont start. what can i try more ?
ohh, i have made a new nasty descovery: when i keep pressed down the comm button and the voice button and press the reset with stylus, the phone turns off and restarts in spl/ipl screen instead of hard resseting. is it really messed up ?
I'm afraid m8,it has most probably some hardware issues,better get it checked by some techy or mobile repair shop.
Cheers !
thanks mate. you are most probably right. do you have any idea what should be checked and how ? i ask this because the software part is clearly damaged.
can i revive it using mtty program ? as a last resort. some mtty commands ? ty
Hi there,
i´ve got an trinity and flashed it with a new rom.
It worked great and the rom was fine but than i found a better one.
When i tried to flash the rom, the update progress stoped at 8pc and mobile phone only has a black screen. I searched forums for long time and than i found
the way to enter bootloader.
If i connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash i got the Message
Error[270] Update Error
Ur Image file is corrupted, Pleas Chack Update utility.
I also tried the method unbrik and hardspl
but i cant flash to any rom.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.07.0000
HARD SPL DOESNT WORK? Progress bar @ 100% but than update error again?
Thank You
reply
yokuma said:
Hi there,
i´ve got an trinity and flashed it with a new rom.
It worked great and the rom was fine but than i found a better one.
When i tried to flash the rom, the update progress stoped at 8pc and mobile phone only has a black screen. I searched forums for long time and than i found
the way to enter bootloader.
If i connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash i got the Message
Error[270] Update Error
Ur Image file is corrupted, Pleas Chack Update utility.
I also tried the method unbrik and hardspl
but i cant flash to any rom.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.07.0000
HARD SPL DOESNT WORK? Progress bar @ 100% but than update error again?
Thank You
Click to expand...
Click to collapse
i think you have to download SSPL Then copy it to your ppc extract nbh file from the rom you want to flash rename it TRINIMG.nbh and copy both this file & SSPL to you the root of SD Card click on SSPL to enter bootloader tnen click on power to confirm installation from SD Card wait untill to see update completed take off sd from the phone & power it on hope this help you
If anyone find a time to help me , about HTC artemis is only stuck on windows mobile screen/logo
..also phone was entering on bootloader mode , three color screen ?
3.15.0000 version T-mobile , but cant fllashing , cant uspl nothing only going to 3% and stopping there.
Any help on this please?
best.r
Hellooooo...
Masters , how to solve this problem , pleasee???????
Radio ROM curropted,
First of all
Try restoring factory settings.
1) PUSH AND HOLD the (-) and (-) buttons over the (ok) and (windows) buttons, then press and hold RESET button.
2) Release reset button. but keep (-) and (-) held.
3) A message will appear and tells you to press SEND to restore factory defaults, SEND = GREEN TEL BUTTON.
4) Press it and wait, see what will happen after, maybe once it's finished you will need a soft reset, I don't remember...
Second Try possibility -if the above will not work-
Try with flashing a new full official ROM
it might be a problem as probably you do not have USPL unlocked!
so your SPL should still be looked to 3,13 or similar.
it would give you a DEVICE ERROR if you update it, and stop at 3%.
if SPL is 1.11 so that's fine, SPL is unlocked.
just enter bootloader and flash any complete (OS + RADIO) Rom, even non factory rom.
if SPL is locked you can save your tel just trying to update and original factory rom.
example: T-Mobile UK, T-Mobile Germany, T-Mobile ....
Note that even if they are all T-Mobile they are different! (Germany is different than UK, and so...)
Desperate last choise
If all the above did not solve,
probably your Radio ROM is curropted and in a bad sector,
use MTTY tool and comands to do a low level format, and remove any residual rom tack.
Do not clean bootloader, you will need it for the new re-flash
Then enter bootloader and flash an official factory rom.
It took me 6,30 hours to save my last Artemis, wish you a quicker solution, so good luck!
mouse.co.nr , thanks for reply mate.
First i have try since from yesterday to give on the phone any fllash , i have try so much diference way to get solution but nothing happen.
The phone cant do a hard reset by presing buttons , the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000 , and i know that the phone was not cid unlock maybe , but i cant give any upsl and fllashing with fllash that phone.
Second i we try with ART_TMOUK_11311001_024990_WWE_Ship_R3 t=mobile UK , nothing happen , also only radio ARTEIMG_TMO_UK_4.1.13.251_02.92.90_RadioOnly , again nothing.
Radio only , and fllash was going to 3% and stopping.
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
..and also i have try to fllash from sd card http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
root folder
haveri said:
..and also i have try to fllash from sd card , i have create one folder with name : root , and i'we put the image ARTEIMG.nbh....but can not starting from sd card also.
Best.r
Click to expand...
Click to collapse
...probably a problem is creating a folder with the name root, "root folder" means on your sd-card without any folders... as far as i know...
anyway, good luck trying
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem! if it gives you the "windows mobile image" and stops there, so it's just the radio, else it's the OS and probably the radio!
do a full ROM updt, official WWE have both radio and OS.
I wish for you that your PPC doesn't stop at Windows Mobile Image (the one after boot image), I have thrown away a P3600 in this way!!! Radio was so curropted that I could not fix it anyway, nither MTTY, required a CIP programming, but I'm not good at...
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
It surprised me the first time I got a 270, try the attached uspl, I got that from the rapidshare, scanned with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked (now it speaks french!).
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
haveri said:
the phone was only get on bootloader mode , and was show IPL 3.15.0001 , and SPL 3.15.0000
Click to expand...
Click to collapse
SPL still Locked!
two solutions:
1) USPL (proper one) lately I foundout the official one on the official form was giving me some update errors, I think the file is curropted, and if startuspl.exe does not run till 100%, reboot and start the RUU by itself, it wouldn't work if you maually start the RUU once the original launched after USPL gaves the error.
I'm attaching another USPL try this other one...
2) if your pc does not see the PPC for USPL, try not other WWE roms, it should be for your ARTEXXXX, ther is ARTE100, ARTE110, ARTE1000, ARTE200 ...
try more than one till you'll get the 100% rom update.
Radio Only will not work, you are in bootloader, you have an OS problem!
do a full ROM updt, official WWE have both radio and OS.
haveri said:
Artemis_USPL , starting and was going to 100% , but cant finalize i think , bcs ERROR [270]:UPDATE ERROR The image file is corrupted.Please check your update Utility.
Click to expand...
Click to collapse
try the attached uspl, I got that from the rapidshare, tested with norton 2010 and is clean, tested today on a german T-Mobile ARTE100 and it worked.
haveri said:
..and also i have try to fllash from sd card
Click to expand...
Click to collapse
Will not work, you can not bypass protections just by running SD bootmode!
if it's locked it's always locked!
haveri said:
i'we download from here all this: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades , and also from official t-mobile.
what of this list is a good RUU for my HTC?
Best.r
Click to expand...
Click to collapse
I have no idea, try one of each, in the worst of cases it will always block at 3% and bring you back to beginning, Bootloader mode back again and re-flash..
hope it'll help!
good luck
no bootloader possible
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
hds09 said:
hi,
I have tried everything on my T-Mobiel MDA Vario 3.
SSPL-KAIS.exe
JumpSPL 156, 193 and 194
pressing of any keys will not forward me into the bootloader
on my pda is IPL and SPL 3.15
I have also tried HardSPL 329 and 356, no success.
the only way to get into the bootloader is when starting KaiserCustomerRUU.exe, but no ROM is getting installed. I always receive an error 270 file defect. but this is not correct, as I have tested 3 or 4 different files.
does anybody have an idea?
thanks a lot
Click to expand...
Click to collapse
Hi!
Check hardware buttons,maybe one of them is broken,that's why you can't put your device in bootloader.
Make a Goldcard (search) and flash the Kaiser with Goldcard inside.It will revive your device.
BR
Scootie