No GSM Error Tried Wiki already - 8525, TyTN, MDA Vario II, JasJam General

Guys here is my situation. I have a Cingular 8525 for some time now I noticed that it was dropping signal and then recovering it I thought it was a radio problem but I changed numerous radios and it didn't fix the issue. Last night I noticed that it wasn't picking up any signal, on turning it on I noticed that I had No GSM I tried the way in the Wiki but I am unable to flash using the radio 1.16 to it I unchecked Allow USB connections but for some reason I cannot flash the radio. I started the phone attempted to flash the phone with several other radios and it just hangs. On rebooting I see NO GSM but when my phone starts up I see it reads the network but I cannot do anything else no calls nothing. Is there another way to flash the radio to my device or is the radio just dead? If so I have another 8525 thats not working can the radio part of it be changed?
Regards

It seems your phone is toggling between 3G and the older GPRS. By default, the 8525 automatically selects 3G if it is available. If you move out of 3G range (considering 3G support nationwide isn't great yet), which will happen often, you will lose signal temporarily and either switch to GPRS or regain a 3G signal. Currently I default my phone to use GPRS just because i can't be bothered with having to deal with dropping signal/calls as often as i used to with the automatic setting. There is a free tool called BandSwitch which can accomplish this for you. The newer version (2.1) is not free but if you can get your hand on the older version which is, it'll work satisfactorily well. I hope this solves your problem.

I had the same problem and nothing worked for me.
Try different solutions posted my various users and see if anytihng works for you.
I think it is a hardware radio problem and probably the only solution is to change the motherboard.
If it is still under warranty - get it done. If not, you are out of luck.

Related

1.20 Radio Rom takes long time to reregister on network after dropped off?

Hi all,
I'm currently experiencing a problem where my Softbank X01ht drops off the cellular network because I live in a low strength area, and takes forever, if at all, to automatically connect back to the network, even if I move into an area where I know the cellular strength is high.
If I manually turn off the phone portion of the hermes, and reconnect, then it happily detects the cellular network and connects. In other words, after disconnecting, it acts as though there is no network in range at all, even though I know there is.
This seems to have started after I upgraded my radio rom to version 1.20 from 1.07. Prior to the upgrade, I know it connected back to the network quite quickly after it dropped out. Has anyone else experienced this with the 1.20 Radio Rom? I currently have the Imate jasjam rom installed on my phone with the 1.04 bootloader.
Unsure if this is related, but the area that I live in has a weak UMTS network, but a relatively decent GPRS network. I'm thinking the phone is getting confused over which network to connect too.
It also seems that if I'm in an area with a pretty strong cellular strength, it doesn't drop out? Would I benefit from downgrading to the 1.16 Radio Rom?
Thanks in advance all.
Gene
I can also confirm that things added with that after a soft reset sometime it cant detect network..i have to manualy turn off/on the radio part....generelly it occures if i reset the set just after making a call or just getting disconnected from edge...
the previous 2 radio that i used 1.16 and 1.08 didnt suffer from those probs...
but the main benifit of 1.20 radio that i get is EDGE speed i can pump upto 220Kb (22-24 KB) download speed in flat when connected to pc as wireless modem but with the previous radios i can barely go 160Kb and the speed did uped/down regularly...
and somewhat strange with this 1.20 radio i cant search for network list manually when even i go to manual in network after sometime i get cant read error...but previous radios where ok in that par too...
and the last benifeat that i get with 1.20 is now the SIM STK menu is working.....
sajib said:
I can also confirm that things added with that after a soft reset sometime it cant detect network..i have to manualy turn off/on the radio part....generelly it occures if i reset the set just after making a call or just getting disconnected from edge...
the previous 2 radio that i used 1.16 and 1.08 didnt suffer from those probs...
but the main benifit of 1.20 radio that i get is EDGE speed i can pump upto 220Kb (22-24 KB) download speed in flat when connected to pc as wireless modem but with the previous radios i can barely go 160Kb and the speed did uped/down regularly...
and somewhat strange with this 1.20 radio i cant search for network list manually when even i go to manual in network after sometime i get cant read error...but previous radios where ok in that par too...
and the last benifeat that i get with 1.20 is now the SIM STK menu is working.....
Click to expand...
Click to collapse
Thanks sajib,
Glad I'm not the only one experiencing it. For me, however, it only occurs when it looses connection to the cellular network. After every soft reset so far, it has connected to the cellular network automatically. To me it doesn't seem to even search for the network. That is, after loosing connection, it is resigned to the fact that it can't connect to a network, so doesn't even try, unless I force it too. I think I have seen it connect automatically once or twice, but either way, it takes at least 10-20 minutes, sometimes it never connects, and I force a manual reconnect by turning off the phone and turning it back on. So is this a known problem with the 1.20 Radio Rom?
Try this...
I had the same problem on my TyTn. Took forever to WiFi connect. Then I found this registry setting:
[HKLM\Comm\TIACXWLN1\Params]
"dot11ShortPreambleInvoked"=dword:00000001
Now my WiFi time-to-connect seems much faster.
software_samurai said:
I had the same problem on my TyTn. Took forever to WiFi connect. Then I found this registry setting:
[HKLM\Comm\TIACXWLN1\Params]
"dot11ShortPreambleInvoked"=dword:00000001
Now my WiFi time-to-connect seems much faster.
Click to expand...
Click to collapse
Hi!
Thanks for the advice, but mine isn't a Wifi problem, but a problem with connecting to the cellular network.
Or do you think that your connecting to the WiFi network and the cellular network are one in the same?
i am using the 1.20 radio as well, but cant say that i have had any of the said problems... i have the cingular 8525 and have used the 2 latest cingular roms, the aku2.3 and 2.6.. but i did have some of the same problems with i used cingulars 1.16 radio
shogunmark said:
i am using the 1.20 radio as well, but cant say that i have had any of the said problems... i have the cingular 8525 and have used the 2 latest cingular roms, the aku2.3 and 2.6.. but i did have some of the same problems with i used cingulars 1.16 radio
Click to expand...
Click to collapse
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene
GeneNZ said:
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene
Click to expand...
Click to collapse
I too have the original problem but have not upgraded the radio ROM. I have the T-Mobile Vario II (sorry not sure what ROM that is) but often when I move from an area of either very weak or no signal to an area with a signal (coming out of a shielded building) I too get the same problem. Initially the phone shows weak (or even strong) signal strength but when I try to make a call I get the box up on the phone screen telling me it cannot connect. I have found that eventually it will, when left to it's own devices, get itself sorted out and allow a connection. But it is invariably quicker turing off the phone (via comm manager) then back on - this always results in a valid connection.
Perhaps the problem that you describe is not related just to the 1.20 Radio ROM upgrade?
tony.wheeler said:
I too have the original problem but have not upgraded the radio ROM. I have the T-Mobile Vario II (sorry not sure what ROM that is) but often when I move from an area of either very weak or no signal to an area with a signal (coming out of a shielded building) I too get the same problem. Initially the phone shows weak (or even strong) signal strength but when I try to make a call I get the box up on the phone screen telling me it cannot connect. I have found that eventually it will, when left to it's own devices, get itself sorted out and allow a connection. But it is invariably quicker turing off the phone (via comm manager) then back on - this always results in a valid connection.
Perhaps the problem that you describe is not related just to the 1.20 Radio ROM upgrade?
Click to expand...
Click to collapse
Hi Tony,
It could possibly be an application or the ROM itself causing the problem, however, I think its the radio rom in my case, simply because this problem only started occuring after I upgraded to the 1.20 Radio Rom. Previously on the 1.07 Radio rom, the phone would connect automatically and immediately. Also I just performed a hard reset after I discovered this problem, and it still seems to be occurring...
I also am sure that after a long while the phone reconnects, I have seen it try reconnect a couple of times. But then again, a couple of times I've left it for 10-30 minutes, and it hasn't reconnected. Unsure of exactly how it chooses to reconnect and when it tries to reconnect. You would think it would try reconnect constantly after a specified period, but in my case it seems very random.
GeneNZ said:
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene
Click to expand...
Click to collapse
i actually get pretty solid coverage whether moving or stationary. especially at home since i live not a quarter mile from a cingular tower and i dont think its necessarily related to the aku version since i have gotten the same result with either 2.3 or 2.6. But i can say for sure that the cingular 1.16 radio is junk my biggest complaint was gsm calls cutting out and on my calls on 3G had a very weird digitized background noise, kinda sounded like a bad digital echo... 1.20 fixed all of that for me
shogunmark said:
i actually get pretty solid coverage whether moving or stationary. especially at home since i live not a quarter mile from a cingular tower and i dont think its necessarily related to the aku version since i have gotten the same result with either 2.3 or 2.6. But i can say for sure that the cingular 1.16 radio is junk my biggest complaint was gsm calls cutting out and on my calls on 3G had a very weird digitized background noise, kinda sounded like a bad digital echo... 1.20 fixed all of that for me
Click to expand...
Click to collapse
When I'm roaming around my connection always seems to be sustained. e.g, I've been checking my phone ever 1hour for about 24 hours, and have yet to see my signal lost. Is it possible that the phone is getting confused over which band to connect to? As I said in my first post, I have a relatively weak 3G/UMTS signal from my home (1-2 bars), and a relatively strong GPRS signal (3-4 bars). Presumably the phone is UMTS-preferred, and uses GPRS as a secondary.
I saying this, even if I go to another area which usually has 5 bars UMTS signal, I haven't seen the phone immediately connect. This was after about 10-15minutes waiting in that area.
Gene
GeneNZ said:
When I'm roaming around my connection always seems to be sustained. e.g, I've been checking my phone ever 1hour for about 24 hours, and have yet to see my signal lost. Is it possible that the phone is getting confused over which band to connect to? As I said in my first post, I have a relatively weak 3G/UMTS signal from my home (1-2 bars), and a relatively strong GPRS signal (3-4 bars). Presumably the phone is UMTS-preferred, and uses GPRS as a secondary.
I saying this, even if I go to another area which usually has 5 bars UMTS signal, I haven't seen the phone immediately connect. This was after about 10-15minutes waiting in that area.
Gene
Click to expand...
Click to collapse
yes, the phone is set to prefer the UMTS bands.. have you tried setting the band manually instead of it letting it autosearch? you can do it in the phone settings menu or use the app listed here: http://forum.xda-developers.com/showthread.php?t=286844

Vario II network coverage question

Recently my Vario II intermittenly loses network signals, it says No Network and I have to toggle phone off/on to make it search for signal again. This only happens when I'm at home (Charlton SE7 area).
Rom 1.21.110.3 (19/06/06)
Radio 1.05.05.00
Does anyone have the same problem?
toucam said:
Recently my Vario II intermittenly loses network signals, it says No Network and I have to toggle phone off/on to make it search for signal again. This only happens when I'm at home (Charlton SE7 area).
Rom 1.21.110.3 (19/06/06)
Radio 1.05.05.00
Does anyone have the same problem?
Click to expand...
Click to collapse
Flash HardSPL first, then upgrade your radio.
Ive linked to my guides incase your unfamiliar with the process.
The newer radio should possibly increase your GSM efficiency. Are you in a decent area for reception?
mrvanx said:
Flash HardSPL first, then upgrade your radio.
Ive linked to my guides incase your unfamiliar with the process.
The newer radio should possibly increase your GSM efficiency. Are you in a decent area for reception?
Click to expand...
Click to collapse
Hi, many thanks for your detailed guides. I've upgraded Radio to 1.38.00.10 but the problem still persists. I'm in a very good coverage area, always get full bars 3G when it works. Soft-reset my phone and now it's searching in vain for network signal, I'm confused
What operator are you with ? Maybe the cell where you live is getting overloaded. We had a problem similiar to this last month when our local base station had a problem. Our work-around was to disable 3G but not using a Hermes . Apparently the handset tries to register using the 'best' data-bearer its configured for. So disabling 3G made it register with GPRS which worked fine. They then fixed the base station and we were able to re-enable 3G. I would
guess Charlton would have a lot of subscribers per cell. You would expect the coverage to be better in a built-up areas but who knows. Maybe an enquiry/ complaint to the operator would at least tell you if they know of a problem and if its temporary or longer term
Cheers for that. I'm with T-Mobile. What's bugging me is that this signal disappearance only happens sometimes. It's not that I don't have 3G (or signal for that matter) at all, I still get full 3G signals fine most of the time. But you probably were right, looks like it's a fault from the operator's cell in the area, I will give them a call next week to see if there's an explanation.
I've noticed this problem when I'm in the south London area (very general I know). People have got around the issue temporarily by forcing the phone to GPRS only
More problems! After upgrading to 1.38 and trying all sort of "good" radios like 1.17, 1.27, 1.34 I can't make/receive calls unless GSM is forced. There must be something wrong within my immediate area because with the same radios everything works flawless just 10 mins down the road. I just called TMob and there's no technical fault or anything from their side. I will just have to put up without 3G until the problem fixes itself
There are lots of people complaining about 3g on T mobile in UK. They seem to have serious issues with Hermes devices and the dropdown to GSM.
I had a problem six months ago with my hermes on orange at home in SW London. For a few weeks it was mucking about - I rang O who advised me that they were experiencing some local issues but would fix them within days. I switched to GSM for a few days. When I switched back its worked fine for last five months.
3G gone mad!
the same thing was happening to me. Full 3G reception in Leicester, tried to connect to get my e-mails and then the signal totally goes. The same thing happens when I make calls as well. Switched to GSM and everything worked. Now in York and everything is working on 3G.
Network is T-Mobile.
This sounds similar to the issues I am having.
Do you get the phone hanging as it attempts to start a call and then after a while a message stating that it was unable to connect?....sometimes resulting in a soft reset to bring the device back online? In my case toggling bluetooth will reset the connection.
I am with T-Mobile in Glasgow but get the same issues during the day in Edinburgh
No 3G
aidanbree said:
This sounds similar to the issues I am having.
Do you get the phone hanging as it attempts to start a call and then after a while a message stating that it was unable to connect?....sometimes resulting in a soft reset to bring the device back online? In my case toggling bluetooth will reset the connection.
I am with T-Mobile in Glasgow but get the same issues during the day in Edinburgh
Click to expand...
Click to collapse
No mine doesn't say anything, it sounds "ding ding" after a few secs like when you press the hang up button. I can use the Internet but anything to do with calls is just impossible. I've switch to GSM now and everything's back to normal. A bit annoying can't use 3G at home.

Elf loses phone signal, doesn't reconnect

My wife's Elf keeps losing the phone network connection, each time she was in an area without reception, like elevators etc. and than refuses to register back to the network. Only way to get it to register again is to do a soft reset. (turning off and on the phone radio sometimes works, automatic and manual network selection don't). Tried another SIM card, same thing happened. The problem developed when she started to use GPRS/EDGE (previosly used her phone for calls and SMS).
Any ideas?
Have you tried flashing to a new radio in the elf upgrading forums?
Cheers
Changed radio still no go. Interesting enough it works when she doesn't use GPRS. I changed the RIL registry settings, and will be testing it next few days.
Oh, check it out and see how it goes.
Radio is usually affecting the issue.
You can hard reset, if it doesnt work!
Do backup!!
Seems like I tried everything possible and still nothing, it is probably hardware failure. My wife is going nokia after this, she said no more winmo.

GSM connection problem

I am only writing here after I tried everything I could possibly imagine with no result. Sorry the long text.
I'd like to hear ideas from you. Anyone with a similar problem.
I have a Blackstone, and never had even the smallest problem with GSM signal. But now I face the following:
- If I set the Band to "Auto", my phone connects to the HSPDA network with no problem, and I use internet and make calls normally.
- If I set the band to "GSM", sometimes it connect, sometimes not. When I manage to connect, if I try to use the internet, sometimes I lose the signal. When I am making a call, it frequently hangs up. The problem is random, sometimes I can use GSM with internet and calls for a long time, but suddenly it crashes again!
The solution would be always connect to HSPDA, but the problem is that on "Auto" the phone sometimes goes to GSM alone, and the signal breaks down.
I cannot be sure exactly when this problem began. But it was after I installed PDAVIET's Rom (WM 6.5 21053 and manila 2.5), and radio 1.17.25.09.
Among everything I have done:
- Flashed dozens of Roms always hard-reseting twice after. Tried stock Roms, cooked Roms with WM 6.1 / 6.5, manila 1.3 / 2.1 / 2.5.
- Flashed radios 1.13 / 1.14 and 1.17 in combination with all Roms. Tried with and without ripphone.dll's
- To eliminate a operator problem, I used my chip on a nokia for a few days, and didn'd have a single problem with signal, calls, internet. I installed a chip from another operator and faced the same problem.
Nothing I have done made any result.
Even using my stock Rom didn't solved. I used this phone for 8 months with no problem. So I came to the conclusion this is hardware related, with the antenna or something.
Thanks
All right, have been through a few more Roms and Radios and the problem remains unchanged...
Really looks like an antenna related problem. Apparently I will never connect to GSM again unless I take my device to service (have no guarantee), and be lucky!
But anyway, I found a solution to the connection instability and phone calls interruptions. Solved my life for now. It is very complicated:
*********************
HKLM\Software\OEM\UMTS
OpMode=2
*********************
This forces the phone to always stay in the 3G band. The "Auto" mode you can set in Comm Manager lets the phone change to GSM when the signal is low or whenever he wants, and my connection breaks down.
BTW, other modes are:
OpMode=0 (Auto mode)
OpMode=1 (GSM only mode)
OpMode=2 (3G only mode)
I know this may not be useful for anyone, but I just felt like sharing...

HSDPA, will donate for help!!

Hi guys, i know this is a common problem amongst some of us, there are several threads discussing the connection drops but please there must be someone out there who knows something about it.
Basically with HSDPA enabled, the connection will last a random period of time before disconnecting by itself and displaying: cannot connect for an unknown reason.
When HSDPA is turned off, only 3G is used, although this works fine, it is fairly slower.
I am on T-Mobile UK, I have phoned their technical support, we have established it is not the sim card but the phone itself and have tried a variety of steps to solve this, for example receiving band settings for WCDMA, this has not fixed the problem.
I have tried changing the username and password combinations and have tried every combination of every advanced network option. I have used the T-Mobile stock rom 1.43, official HTC ROM 1.66, duttys hg, energyROM, artemis 5.0 and artemis 5.5 (would recommend btw) using MTTY before every flash, and every single different radio combination.
Myself, and many people here would be very grateful for any help posted.
Thanks in advance
Why don't you try Settings > Connections > Advanced network > GPRS tab > change from PAP to CHAP.. and reset... or viceversa.. that helped for me..
Thanks for the post, i've tried all that i've tried all advanced settings, at most they last for a day or so but after a while the connection dropouts seem to worsen
Ok ive just gotten off the phone for the third time with the technical support
basically what they've said is that the hsdpa WILL disconnect because the mobile towers simply can't handle the traffic.
He said in his honest opinion I should disable it because it simply won't work well and there is no fix.
Taking the piss juuuuust a little bit
Mine on t-mobile uk will show H, but usually drop down to 3G. It won't give me an error when it drops down though.
It sounds like its not transferring from H to 3G.
To be honest, i was unaware t-mobile ran HSDPA till I got my HD2 (never showed on my BB).
mine switches between 3G and H too, this happens when the connection is being used (for example loading a web page) when the job is finished (page has finished loading) it turns back to 3G right?
are you saying that your connection never disconnects?
may i ask which radio and rom you are using?
thanks!
For my personal experience, I have for over a month, on versions 1.48, 1.66 by HTC, artemis versions, versions of other French chefs. had no problems,
Login Exchange push 24/24 without any cuts, I solicited the network with opera I passed automatically 3g H, and since February it to completely fall with the problems that everyone encounters (lost connection for several minutes , unable to connect to 3G without hard reset)
to remove the sim chip, I try with another chip of the same operator, another chip from another operator, the problem is still there.
For several days I have also continued a Touch HD, it faces no problems, no problems in connection 24/24.
In short, impossible to challenge any operator, any base station, any sim card.
It is then that the problem come from HD2:
-Software: We all try every combination of rom and radio rom possible.
It is the hardware, maybe the chip integrated into a concern for design, manufacturing concerns on some series, may be dysfunctional due to incompatibilitée between several chips of the phone, short, HTC should look into the problem.
cgrec92 said:
mine switches between 3G and H too, this happens when the connection is being used (for example loading a web page) when the job is finished (page has finished loading) it turns back to 3G right?
are you saying that your connection never disconnects?
may i ask which radio and rom you are using?
thanks!
Click to expand...
Click to collapse
correct, it never disconnects.
It will switch seemlessly between them, when using or not using.
same one it came with. O2 HD2.
ROM 1.43.206.4 (70315) WWE
RADIO 2.04.50.22_2
I've also been struggling with this problem ever since I got my HD2 three weeks ago. However it seems like only a few people experience this.
My case is exactly like cgrec92 described. I'm on a 3.5G network in Denmark (3 Mobile), the phone shows the 3G connection at all times. When things do work and I use Opera/weather/Twitter/email etc, the symbol changes to H and I know the data connection is functioning. I can be using this for a whole hour without any problems.
However, if I put the phone down for a while and then pick it up again to use one of its data services, very often it does not connect to 3.5G (or H) anymore. It will still show the 3G icon on the screen, but there's no data connection. Then I go to Connection Manager and I can see that data connection shows as Off - and after a few seconds it goes back to On by itself That does not mean the problem is solved, as the phone still fails to establish any data connection. What I need to do then is manually turn off data connection and re-enable it again, which makes the 3G symbol immediately change to H. Then everything starts working again - until the next time it stops working...
I contacted the HTC customer service and they said it might be a driver-related issue, recommended a hard reset. I did that and for a few hours I thought it solved the problem, but no, data connection still disconnects by itself.
I spoke to 3 Mobile's technical service and they told me to update my software, which I had already done previously (I'm running stock 1.66 ROM Danish). They also said they never received any such complains about the HD2.
Like cgrec92 I've also played with all kinds of network/band settings, but it did not make any difference.
***
One question: isn't the phone supposed to automatically connect via EDGE when it cannot connect via HSDPA? Because in my case it will only establish data connection via H, never EDGE.
Any advice is greatly appreciated!
My take on this FWIW
It's not the phone!
It's the radio ROM installed.
I live in an an area where T-mobile say I can't get HSDPA.
However, I know that I can. How? Because 3 network uses the same local cell and transmitter as T-mobile and their signal will rip your eyes out!!!!!!!!!
All information obtained from a good friend of mine who works for BT, who, service manage the cells for the networks.
Plus, in this location, the cell traffic is then handled by BTs digiatal backbone which takes it who knows where after that.
So I have a very isolated situation in which I know there is a decent HSDPA signal, but I have had trouble with drop outs on my two previous phones (Nokis 5800 and HTC Touch Diamond 2) and originally on my two T-mobile mobile broadband feeds using Huawei E220 cell network modems.
All fixed when I finally found the right Radio and flashed it on the phones and unlocked and flashed the latest modem firmware.
My broadband connections are always on and never drop out and my HSDPA signal on my HD2 is through the roof!
To further emphasise the point all the equipment is used (when home based) behind solar glass which is notorious for blocking mobile phone signals.
Land on the best one and you will get incresed battery life as well.
Bottom line is try the latest radios (2.08.50.08_02 in my case) and I think you may be surprised at the results.
Current result of speed test 09.31 hours
ADSLSPEED.COM | Speed Test
3 minutes later
ADSLSPEED.COM | Speed Test
I have the same problem with the connection dropping. What I did to make it work was to disable HDSPA and putting GPRS to CHAP instead of PAP, and so far I have no problems at all
Thanks for the reply and tips. I also did the same earlier today, except that I did not change PAP to CHAP :O. I was waiting until tomorrow before I posted any results, but I gotta say so far the connection has been stable just like yours.
I also called HTC's customer service in Denmark and the fellow I spoke to was very helpful but he said he has never heard about such problems. He sent me updated network settings via sms, but it did not fix the problem.
I mean, only some users around the world suffer from this problem, right? So what is it that's wrong with our devices? Is it a production fault? If I exchange my phone for a brand new one maybe I won't be unlucky again? When 3 DK finally told you the problem was unfixable, did they mention other users with the same issue? Did they ever offer to replace your phone?
DORMIU said:
Thanks for the reply and tips. I also did the same earlier today, except that I did not change PAP to CHAP :O. I was waiting until tomorrow before I posted any results, but I gotta say so far the connection has been stable just like yours.
I also called HTC's customer service in Denmark and the fellow I spoke to was very helpful but he said he has never heard about such problems. He sent me updated network settings via sms, but it did not fix the problem.
I mean, only some users around the world suffer from this problem, right? So what is it that's wrong with our devices? Is it a production fault? If I exchange my phone for a brand new one maybe I won't be unlucky again? When 3 DK finally told you the problem was unfixable, did they mention other users with the same issue? Did they ever offer to replace your phone?
Click to expand...
Click to collapse
Erm!
It's your radio!
But, I think I did say that in a previous post.
You had a helpful fellow who sent you updated settings?
And he thought that was going to fix your problem?
That was helpful!
It's your radio!
The technicalities are beyond a customer assistant at the end of a phone. They work from a script.
I'll send you the settings.
Have you done this?
Have you done that ?
Never heard of anyone else with your problem!
It's your radio!
T-mobile uses PAP protocol (at least they do here in the UK) and it's a handshake protocol so changing that won't really do anything to the signal definition.
You have it or you don't.
It's your radio!
There is no "production fault".
You are not "lucky" or "unlucky".
You are in an area where you will suffer from this because of the ???????
THE RADIO!
I think I have made my point.
If it turns out that you don't have a radio issue then please feel free to admonish me.
Until then----------
It's your radio!
well I don't mean to sound rude but do you SERIOUSLY think we haven't tried that? ive tried every possible radio available here and every different rom, so excuse us for trying new things.im glad your not having any troubles yourself because it is really annoying
perhaps you could post us your rom and radio?
I don't suppose you could post us your settings in advanced network?
did you use the connection setup?
thanks for your help
Yes, I was about to mention something similar. I haven't tried combining different ROMS & Radios myself, but I know people like cgrec92 who have with no good results.
And if it is the radio, then every 3 Denmark user like me would be experiencing the same problem, correct? I don't think that's the case. Actually when you read the forums you will find users from different countries with this problem, and they/we are not the only ones with a certain combination of ROM/Radio.
So yes, by disabling HDSPA I finally managed to have a stable data connection (but no 3.5G, obviously). At this point no one seems to know the cause of this issue, but I suppose it's naive to expect a future ROM to solve it, after all it's not a widespread problem. Is HTC even working on it? Are we sure it's not our devices that are faulty?
I honestly have no idea, but I cannot just accept this problem and live with it after all the money I put into this phone. That's why I brought up the possibility of having it exchanged for a brand new one in hopes that it will not have this problem.
Any ideas?
cgrec92 said:
well I don't mean to sound rude but do you SERIOUSLY think we haven't tried that? ive tried every possible radio available here and every different rom, so excuse us for trying new things.im glad your not having any troubles yourself because it is really annoying
perhaps you could post us your rom and radio?
I don't suppose you could post us your settings in advanced network?
did you use the connection setup?
thanks for your help
Click to expand...
Click to collapse
The post by pa49 was to DORMIU.
I'll pm you my t-mobile settings.
And I cant use the connection setup, being an O2 HD2, it only allows selection of O2.
cgrec92 said:
well I don't mean to sound rude but do you SERIOUSLY think we haven't tried that? ive tried every possible radio available here and every different rom, so excuse us for trying new things.im glad your not having any troubles yourself because it is really annoying
perhaps you could post us your rom and radio?
I don't suppose you could post us your settings in advanced network?
did you use the connection setup?
thanks for your help
Click to expand...
Click to collapse
I referred to my radio in my previous post -20.08.50.08_02.
My OS ROM is Leo Lite 3.
Connection setup used and no further settings.
My explanation for this is the fringe nature of the received signal.
The radio its constantly 'hunting' for a signal and the radio software has difficulty in locking on.
BTW OS ROM and settings ready don't affect the efficiency of the radio signal.
MidnightDraven said:
The post by pa49 was to DORMIU.
I'll pm you my t-mobile settings.
And I cant use the connection setup, being an O2 HD2, it only allows selection of O2.
Click to expand...
Click to collapse
I appreciate the help, but he doesn't seem to understand the issue here. It's not that we have low connection, or that we cannot connect to the 3.5G network. The problem is that the phone's data connection will automatically disconnect even when we are in an area with full 3.5G signal. The phone will connect for a while and then, moments later, in the same spot and with full signal, data connection is terminated. So I just can't see how the radio has anything to do with that, especially when there are hundreds of other users out there with the same ROM & Radio as us and in the same network. And yet they do not experience this problem.
Ive have similar issues but it depends where i am it appears that some towers its ok where others its not!
mo
DORMIU said:
I appreciate the help, but he doesn't seem to understand the issue here. It's not that we have low connection, or that we cannot connect to the 3.5G network. The problem is that the phone's data connection will automatically disconnect even when we are in an area with full 3.5G signal. The phone will connect for a while and then, moments later, in the same spot and with full signal, data connection is terminated. So I just can't see how the radio has anything to do with that, especially when there are hundreds of other users out there with the
same ROM & Radio as us and in the same
network. And yet they do not experience this problem.
Click to expand...
Click to collapse
The radio differentiates between all the different levels and types of signal and it depends on how exact it interprets the signal. They are supposedly optimized before release and then re optimized with each newly released version. Network operators then have their own network parameters and again the radio has to accommodate this as well. One radio will never satisfy all these criteria and some of you will be in the wrong place at the wrong time on the wrong network with the least effective radio.
I can assure you that I most certainly do understand the problem and that is why, in my own case, I have resolved it.

Categories

Resources