Hi
I've managed to get WM6 Pro (build: BA_WM6_HELMI_BA_WM6_R0_Public) to work well on my Blue Angel (2nd Gen). I'm trying to get the Blackberry Client to work on 02 in the UK.
After a clean build followed by installing the 4.0.0.90 the blackberry data tunnel established for about 15 minutes, disconnected and now will not reconnect. (I can replicate the clean build, install 4.0.0.90 and I get the same results every time)
I have tried each of the following software in turn after a deinstall and reset of each preceding file:
Windows Mobile 6 Pro:
4.0.0.67 http://sems.org/content/download/bbc4/bbconnect_pocketpc_bb_4.0.0.67.zip
4.0.0.84 http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90 http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91 http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92 http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
I'm really keen to get Blackberry working, It is infuriating that you can do a clean build and install the 4.0.0.90 client and a tunnel will establish but only for a few minutes before disconnecting. Once the connection has been dropped, a "register now" on the utility tab click will cause a connect to start, and give the following outputs:
Not Connected (10 secs)
Network Avaialble (10 secs)
Data Tunnel Available (1-2 secs) (gives ip addresses alternately in the 10.5.0.0 or 10.7.0.0 network or 120.12.0.0 network)
Not Connected
Any ideas?
Cheers
Leon
Update: Have tried the hacking method mentioned elsewhere, same results.
Has anyone had any success with extracting the Blackberry Software from the official 02 XDA iis release software (O2_UK_XDAIIs_WWE_14000_242_11200_SHIP) from a working blue angel? Can anyone tell me where I can find some info on how to do this?
The fix is to install this file:
bbconnect_wm6_professional_bb._al_4.0.0.97.cab
you'll need to google it as I dont know where I found it!
post here: http://forum.xda-developers.com/showpost.php?p=1930398&postcount=3
not working for me..
I have the latest 6.1 Rom and tried the BB connect 4.0.0.97 and still get the same result: the BB connects for about 10 seconds then drops the connection.
You didn't have to tweak the registry?
anyone else out there with the same problem ?
Related
Hi all!
I have installed the WidComm stack, but since then I cannot use my i-mate as a GPRS Dial-Up Modem. When I select Dial-Up from the Bluetooth devices, after some seconds it pops up a window where I can enter my username, password and the number to be dialed. But when I press Dial, nothing more happens, just a window pops up saying "Dialing *99#..." but then I get an error message "Error 692: There was a hardware failure in the modem...".
I tried it with and without Hardware flow control etc., with and without AT command +cdgcont=1,"IP","internet",0,0 still no success.
On the other hand my old MS Stack lost its SSA profile somehow, so I cannot connect through that one either anymore.
Since noone is saying anything about this issue, I assume everybody is happy and has it working, am I right? :wink:
Any ideas? :?: Please help, I need it badly... :?
Kristof
I have the exact same problem. Have you found the solution?
I think it's caused by the widcomm stack that was extracted from a non phone-edition ppc (which of course cannot be used as a modem). maybe the extracted stack from a hp 6300 works?
Funny thing is I also can't connect via IR.
l did a hard reset & voila, I can use my xda2 as a wireless bluetooth gprs modem again.
Putra,
really ? after a new format u were able to connect using GPRS and USB without any problems ?
I' have the same problem with my i-mate k-jam latest WWE rom...
Error 692: There was a hardware failure in the modem !!!
And the connection were dropped down...
Maybe could be the SPB GPRS Monitor program ?
I've disabled all possible thing related to ActiveSync and Usb connection , either on pc and my k-jam....
I'm goin' to be crazy !!!
Only one time i was able to connect for up to 2 minute, without any problems... and then, after i've tried again to estabilish a new connection, i won't be able... it sais Error 892.... !!!
Anyone Could Help me ?
Thanks a lot in advance...
Raid.
sorry...
Sorry there, but it was so long ago, I cannot even remember what I did.
I have upgraded to the Prophet since Jan, and no longer using the Xda2... it's now my backup in case something happens to my Prophet.
The Bluetooth connection works fine... but sometimes the modem still "hang" and i got Error 692 or TCP Error 743... it seems that the major problems are caused by the ActiveSync, when i disable the USB connection either on my phone and on my laptop everything goes fine...
With the USB connection....no way at all ! After 2 minutes the connection is terminated.... even if i've disabled ActiveSync USB connection...
Hope this helps....
Alessio.
Nothing to do....
Also using BT stack (Microsoft) after few minutes my wireless modem seems still connected, but i cannot send/receive packets over the internet.
It seems like frozen !!!
And after i've clicked the "Disconnect" through the dialup connection icon on my task bar, my wireless modem doesn't respond anymore... i need to reset my device and sometimes this doesn't works at all, Windows stop responding while i'm trying to open the "Network Connections" panel... after the timeout completed and the dialup is disconnected i can open it again !
What's the problem !?
I'm downloading the new Dell BT stack for my laptop... i'll update you again...
I cannot figure the problem is my device... i can surf with opera beta for WM5 without any problems !!!
I solved the problem....
I've upgraded my MS BT stack with the Dell BT stack new update (Latitude D410).
Everything seems working fine now, i can stay connected above 15 minutes now... in this moment i'm writing throught my EDGE connection
I cannot use the USB modem... after 2 minutes i cannot send/receive packets anymore... i've disabled ActiveSync either on phone and laptop !
Some one could help with the USB and my Wizard?
Thanks.
A.
I have some problems with GPRS/EDGE connection using the wireless modem...
I flashed my i-Mate K-Jam Italian, with the latest i-Mate WWE ROM.
Before the flash i never tried the wireless modem, so i dunno if it is a ROM problem....
But...
1) I have serious problems using the USB modem link option, in this mode after about two minutes my modem seems hangs and the connection still stays up but i cannot send/receive any packets from the internet. Also, when i try to disconnect the remote connection through the windows connection icon on my taskbar, the modem logs shows up timeout error contacting modem...... when the timeouts end i cannot use the modem anymore and i got a Error 692...hardware error.... i need to reset the modem or turn on/off the flight mode...
2) After updating my BT Stack (Microsoft) with the native BT drivers of my laptop (Dell Latitude D410), the bluetooh connection seems working fine... but after about 15-20 minutes the modem still hangs like happen with the USB connection. Before the driver upgrade i was stuck in the same way of the USB connection !!
I've disabled ActiveSync USB either on my phone and on my Pc...
My KJAM works fine if i use OperaBeta or IM+ on my phone... so i can connect/disconnect and so on whenever i want !
I've got a Nokia 6021 that ROCKS with EDGE on my laptop, compared to my K-JAM!
Anyone have a solution ?
Is a known problem of the last iMate ROM?
I'm going to be crazy....please someone help me ! Razz
My configuration is:
Dell Latitude D410
ActiveSync 4.1 build 4841
Dell BT driver (Toshiba model)
Software on phone:
SPB PocketPlus, Diary , Backup
OperaBeta 8.5
TotalCommander
smartskey in background
Tomtom
I've uninstalled SPB GPRS monitor and IM+
PS: i'm sorry if i made some English errors i'm italian !
I had the same problem since oct'05 with pda2k. Then I thought I was having a faulty device, so I bought kjam since nov'05. From that month to today I didn't found any solution. I search forums, ask ISP, upgrade to O2, Qtek ............ Nothing worked. So, I think using nokia or a sierra card is the solution.
Hi
I upgraded my T-Mobile Vario 2 with the new ROM & so far everything is going fine, apart from my BB Connect service.
Re-installed the client after the upgrade & it attempts to connect, gets an IP address as it should & then bombs out..
Everything is the same as it was pre-upgrade - BB PIN etc, so I'm stumped!
Anyone else experienced this & if so have a solution?
Regards
G
Well, it appears that BB Connect doesn't work with the 2.11 ROM. I downgraded back to 1.35 & the BB Connect software worked again...
Hello,
I'm using JBED (v. 02.2008 downloaded from this site) on my Axim x50v.
I noticed whenever an applet tries to connect to the Internet (via BT via phone/gprs) it gets disconnected very often. At least 5 tries are required before the phone actually connects to the Internet and still I get disconnected randomly.
The phone, connection, network coverege, is definately not an issue here. Besides the very same applets work perfect using jeodeck (no problems connecting, no sudden disconections).
I recon the problem may be a short waiting time before connection retry, which is somehow set within JBED.
Anyone has any idea how to solve this problem??
Best regards
fbifbi
Yeah, I have the same problem .
Hi All,
Currently using a iMate pda2k (Blue Angel) with the first-released Helmi Windows Mobile 6 Professional ROM installed. I've really got two problems, but one that is annoying me more, and that is that I can't connect to my home wireless network because I have got WPA2-Personal security enabled. I found on another forum post that I need to update the AKU, but i'm pretty sure I did that when I first installed the ROM. My other problem is that I can't turn the GSM radio off (phone). But i'm more in need for a solution to the WPA2 problem. Should I upgrade to a newer ROM, because i'm thinking of updating to Windows Mobile 6.1 or is there another solution (please no 'go back to Windows Mobile 2003!).
Thanks in Advance,
Timbo.
w. http://www.graphicgraffiti.com.au/
g. iMate pda2k (w) WM6 Helmi
The BA WLAN driver does not support WPA2, some users report that they ca connect to WPA2 protected networks but these cases are rare
You may try a combination of WPA/WPA2 with TKIP encription (not AES) if the router will let you. I just returned a new Belkin N router back just because my BA wont connect to the wifi, even with WPA/WPA2 mixed mode.
Hello,
If it helps you, I have a Zyxel HW660-D1 and using wpa/tkip I can connect with my BA, but only with xplode WM6.1 roms and helmi old rom (that with wifidriver v2), with other WM6.1 roms (Dvha79_ddt or Hoangdat_vista from PDAViet) I can't connect to my wireless.
Our beloved BA isn't compatible with WPA2 - AES encryption, I think it's because of wireless chipset limitation.
PDA2K WM6 Professional issues
I am badly in need of help guys out there !!! Please get off this hook !!!
I have exactly the same problem you are having, I have been trying to work on all these issues for about 4 days until now. I can not get connected to my home wireless lan neither do I can restore my phone contacts. I even tried to go for an upgrade to another WM which is 6.1 and 6.5, but with no use cause every time I try to upgrade my PDA2K device disconnects and nothing happens except for "error 101 connection" that keeps appearing everytime I try to upgrade.
Help me out guys pleeeeeeeeeeeeeeeeeeeeeeeeeeez
I am not sure how many times i have said this, BA + WPA2 = No GO, use WPA-PSK TKIP instead BA does not support WPA2, there are very rare situations that the access point can connect it in compatiblity mode like WPA, but it depends on the model ot the AP, Router, Modem or whatever device you use
Meandhim said:
I am badly in need of help guys out there !!! Please get off this hook !!!
I have exactly the same problem you are having, I have been trying to work on all these issues for about 4 days until now. #1 I can not get connected to my home wireless lan neither #2 do I can restore my phone contacts. I even tried to go for an upgrade to another WM which is 6.1 and 6.5, but with no use cause every time I try to upgrade my PDA2K device disconnects and nothing happens except for #3 "error 101 connection" that keeps appearing everytime I try to upgrade.
Help me out guys pleeeeeeeeeeeeeeeeeeeeeeeeeeez
Click to expand...
Click to collapse
I think you are mixing 3 problems here which should be addressed separately.
Posible Solutions:
#1:Read Xplodes post right after yours
#2:Clarify if you can or can not. "If Cannot" Restoring contacts saved on your phone requires the use of Active Sync. It also requires MS Outlook on your PC. You can sync via USB or Via Blue Tooth. Does your phone sync with your pc?
#3:Error 101 during flashing of new ROM = you have not connected your phone to the PC or its not in Serial Mode. You must follow step by step procedures on BlueAngel Wiki.
error 101 is present when the device is not in bootloader mode prior to upgrade, with wm2003 this was possible because thre was command to put the device in bootloader mode trough activesync, but in newer os it does not work