Hi I own a Cingular 8125 (Wizard), yesterday I did a soft reset because the phone was too slow (it wasn't turned off for about 4 weeks without restarting). When it launched it ask for my phone pasword, then for my sim PIN and took them without problems but it launched without connecting to my provider signal. Everything on the phone is working fine (WiFi-Bluetooth-PC Sync, etc...) but it keeps searching for signal.
I tried 3 different sim cards and the result was the same, then I test my sim on a friends phone and it worked fine.
The only thing I did to the phone a few weeks ago was try to use a dual sim ghost that didn't worked (it show the dual sim menu and worked fine with line 1 but when I tried to switch to line 2 it happenned just the same that is happenning now with just my sim inside, it kept looking for signal)
I did a complete reset and nothing.. happened the same, then I upgrade it's ROM to the one cingular has on it's website (http://www.america.htc.com/support/8125/software-downloads.html) it was the same one installed but it did the upgrade process anyway and NOTHING!!!
Does anyone have an idea of what could be happenning and what can I do to fix it?? I don't want to have a PDA phone just as a PDA and not phone. THanks.
Related
I have a Qtek 9100 running the latest ROM and radio, etc on the Cingular network. The other day I get no signal, and reboot do not fix the problem. I take the sim card, and put it in a different phone. The other phone gets a signal, but says I can make emergency calls only. After about an hour on the phone with a Cingular rep I agree to drive to the store and get a replacement card. The replacement card fixed the problem. 4 days later, I am back to the same problem. The cingular rep is now blaming the phone after they can't figure out whats wrong. He is telling me the phone is "Zapping" the sim card. I find this hard to believe, but has anyone had this problem before? Has anyone ever tried to do an RMA with Qtek? Any help would be great, as i'm ready to put this 9100 on ebay and be done with it, unless an RMA with Qtek is worth it.
Happened to me last week with my 9100 (still running the original ROM). Got a new SIM and it's been running fine since.
i've had my 9100 rom on my 8125 for acout 2 weeks now without any major problems. the only problem I have is that it switches back and forth from gprs to edge a lot, but it doesn't bother me.
have you tried to reflash back to the cingular rom? it couldn't hurt.
I actually am running the Cingular ROM. I already replaced the SIM card 4 days ago, and it worked for about 4 days until it broke again. It doesnt make much sense, because something has to be corrupting the SIM card. When I ran *#*#364#*#* GSM utility, it would give me no data at all. Obviously the SIM card is dead (But still reads contacts on the SIM), and reauthorizing it does nothing to restore it. I will get a replacement today and verify the SIM continues to work in a different handset before I put it back in the 9100. Also I plan to factory default, and upgrade to latest ROMS etc before I try it again just in case. If anyone has any other ideas, let me know. Thanks.
aqueous said:
I actually am running the Cingular ROM. I already replaced the SIM card 4 days ago, and it worked for about 4 days until it broke again. It doesnt make much sense, because something has to be corrupting the SIM card. When I ran *#*#364#*#* GSM utility, it would give me no data at all. Obviously the SIM card is dead (But still reads contacts on the SIM), and reauthorizing it does nothing to restore it. I will get a replacement today and verify the SIM continues to work in a different handset before I put it back in the 9100. Also I plan to factory default, and upgrade to latest ROMS etc before I try it again just in case. If anyone has any other ideas, let me know. Thanks.
Click to expand...
Click to collapse
Aqueous, very much the same problem here. I got my Qtek9100 yesterday and I am connecting to Cingular. When I switch on the phone it takes forever to latch to network. The
Y.
Y..
Y... keeps happening for ever and ever. But once, it latches it stays on to it firmly. If I put the sim in my old phone Nokia3230, it just connects to cingular with a snap as soon as the phone is switched on. When I tap on the " Y " region it shows "searching...". I also tried doing a manual/automatic network detection in settings. During the time the "Y. Y.. Y..." keeps going, the manual detection of networks doesnt show a single network in the list. I dont know what could the problem be, since the sim just works perfect in old phone.
By the way, what does
aqueous said:
When I ran *#*#364#*#* GSM utility, it would give me no data at all..
Click to expand...
Click to collapse
do ? Can you let me know ?
Anup
Hi, all -
I'm hoping for a bit of help - came off a flight yesterday, switched flight mode off and... tick tock... the phone has been searching for the network ever since.
I'm not able to access the phone options either from the keypad screen or from the settings folder. I've hard reset the phone, soft reset it, searched the web for an answer or two - no luck.
It's an O2 version Exec, running their latest rom on a corp install. I've not installed any new progs recently and the sim card works fine on a separate phone.
Any suggestions?
matto
I have exactly the same problem...
I saw the little antenna on my screen but not with signal strength bars, but with dots, and said on double click, searching for network.
A friend told me that it is my SIM card problem. So I went to TIM stores, and they gave me a new one SIM 128K, with my number.
I put it in my qtek, and ......... voila. It worked.
But only for 4 hours. After that I didn't get any signal.
I must say that this problem came 3 days after my upgrade of firmware with the new one O2 Xda_Exec_Upgrade_v1.30.162.
Now I can't install any Radio firmware, as it says ERROR UPGRADING RADIO ROM.
I don't know what to do.
Is anyone out there that can help us????
I really need some help here... I bought an imate phone edition from Bahrain(in the Middle East), where it worked fine with the Batelco SIM(Bahrain's network operator)... even when I inserted my airtel(bangalore) sim into it it was reading the SIM(i.e. SIM contacts, SIM tool kit...etc.), so I can't make or receive phone calls, cant send or receive SMS, pretty much cant do the basic functions of a phone... There is an X on the network symbol...
I did a couple of flashes... tried WM 2005,6.1,6.5...etc... now after a hard reset my phone doesn't auto execute anything from Extended ROM and I dont get any Phone signal... All I get is a message that the phone is 'off'... And there is no option to turn it on...
Even it doesn't access SIM contacts, I tried a network wizard and specified AirTel India.. Still doesn't work... Anyone know what I need to do here??? I have a feeling that something important isn't loading from the Extended ROM on startup...
I've unlocked my phone as well(thinking that was the issue) using itsme's tool. Still no effect...
I'm currently using this SIM card on another phone till I can resolve this, so I am sure that the SIM is completely fine....
Any help will be GREATLY appreciated...
HD mini was working flawlessly until last week when the radio just dropped signal completely. Tried soft reset, no change. Checked with vodafone (UK) they assured me nothing wrong with line. Tried sim in my work HD2...works fine. Tried my work orange sim in my mini, it didn't work.
Tried hard reset, orange sim started working, but no luck connecting to vodafone.
Woke up this morning after using orange sim for almost a week, now that has stopped working as well. I've now tried 4 different networks just in case and none of them get signal.
i have rom version 1.10.161.1, HTC site wont let me download any updates and i've never changed a rom before.
Radio version is 0.63.05.18
Are there any known problems with this? Is there a remedy without sending the phone back to HTC who say it could take up to 30 days to fix the phone!!
2 days ago I've bought Vodafone DE prepaid. It worked really bad. I couldn't connect to the network and my HD2 started to stuck regularly. On my Nokia N82 it worked perfectly.
Yesterday I flew back to Ukraine, put my old SIM card, but nothing changed: my HD2 stucks and he couldn't connect to the network normally. I've renewed my ROM, performed a factory reset - no result.
I've noticed, that he stucks mostly when I try to use my network(try to access Interned). And it's impossible to use numbers like *100#. It writes something like "Unable to perform".
What should I do now?
I suggest getting another SIM card from your regular carrier. It sounds like your SIM is your problem.