I flashed my 8525 with the dopod wm6 rom and i was able to sync my ppc but somehow now im unable to sync with my win xp PC. Already tried on 3 different computers with at least 4 different USB cables, all of them with a fresh install of active sync 4.5 and they all detect my ppc as HTC USB Sync under Windows CE USB Devices at the Device Manager but active sync doesn't connect. USB to PC connectivity is unmarked, ActiveSync in ppc is set at Syncronize using " `usb " .
Im not sure if the " ` " has to be there or not but im guessing thats one of the problems with the configuration, tried going to the registry and edit it to just USB but then it doesn't show the USB option in the ppc.
The that i used was the official "838Pro_HK_ENG_WM6_Upgrade_20070712".
Thanks in advance for any help.
Related
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's
Hi. Help me please! I have got x1 but i haven't got a cd. But i want to update my rom, but it is working on Active sync. The problem : my combuter doesn't know the devce, so i can't update my rom and i can't upload Wm 6.5 Please help me. Thanks
use another combuter
switch x1 in drive mode
There is absolutely no need for the original CD, i have one but i have never put in the the computer, i don't know even what's on it
I use my X1 with 2 computers, a Vista and an XP Pro, both recognized the x1 with no special drivers, activesync ok.
to update the ROM, check the X1 ROM forum here, there is a method without PC (the MicroSD method), which i use and is very fast and easy.
Does anyone know whether there are any prog that allow usb host on the xperia? I want to plug my hard drive into it w/o using a computer
It doesn't exist simply becuase xperia doesn't has the hardware to be a usb host.
so
So, thank you for all, but my problem is still. So, I've got windows xp and x1, the usb driver connect is very godd, it is working, but if i choose the Active sync the xp doesn't know the device. I don't know why. Should i have a driver or another program ? I want to update my rom and Wm 6.5. Please help
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Ethermind said:
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Click to expand...
Click to collapse
THANK YOU VERY MUCH
The problem was the active sync, I insalled it
glad to know this
I cannot synchronise with my pc.
I am using win xp sp3 with activesync 4.5
htc jade ROM 1.40.721.3 (21259) ROM date 11/04/08
anyone please help???
bigmek said:
I cannot synchronise with my pc.
I am using win xp sp3 with activesync 4.5
htc jade ROM 1.40.721.3 (21259) ROM date 11/04/08
anyone please help???
Click to expand...
Click to collapse
Is this the first time you will sync your unit with your PC or you'd been syncing with your PC before and just have this problem now?
....from the first time i brought it.... until now...
any relation with my rom 1.40.721.3 ???
Do you get an error? is it connecting at all?
currently i use it as a modem for my pc. no problem at all except using activesync 4.5
Have you tried re-installing the ActiveSync using the provided StartUp disc ?
i already done that. but i download it from microsoft.com.
You could try to update the device drivers in XP
(Control Panel --> Device Manager --> Portable Devices --> Touch 3G T3232 --> right mouse click --> update drivers --> let it search automatically)
there is no "Portable Devices" in my xp Device Manager...
if you use the device as a modem you can't use active sync as well. I have noticed a handy little feature on this phone that when i plug it into a pc it gives me an option on the phone to use the device as active sync, mass storage or modem.
I would sugest that this is your problem, there is an option to always use the option you selected so if you chose alsways use as modem then you will never get an active sync go to settings, connections then usb to pc and see what you have got selected, i have the option ticked to always ask me.
Tom
i know that option, because i can read & write my storage. when i use it as a modem, at same time, i cannot access the storage.
right now, i copy cab file to storage in order to install the program...