hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.
http://forum.xda-developers.com/viewtopic.php?t=15176
as far as i understood the merged rom has an older version in it, but I don't have it on my xdaii.
If it has installed itself on your himalaya, uninstall instructions are in the thread
thanks M4io
but neither winzip nor win rar recognized the file i downloaded on the thread you have posted.
wnen i click on the download it shows.
(download the 1.34 mb file, 'download PHP').
now what i want to know is what is PHP?
and why dosen't the winzip & win rar recognized's this cab file.
thanksin advance.
jaykumarr said:
hi sin i flashed my xda with your merged rom.
everything is ok expect the caller id.
it dosen't show the id is there any cab file for that?
if yes can you please post it here in this message so who ever's xda has this problem can use it.
thanks in advance.
Click to expand...
Click to collapse
Start>Programs>File Explorer>My Device>Extended Rom
Install Caller_ID_W..
PHP is a language which runs on the webserver. so when you click on download.php you actually start a service on the server, which gives you the requested file.
now these CAB-files are pocketpc cab files ad are kind of setup programs for PocketPC , so you have to copy the CAB to your pocketpc and execute it there.
You can execute it by putting it in your extended rom, modify the config.txt and hard reset (I hope you know what hard reset means/implies)
or simply by tapping on it in PPC file explorer. In this case the CAB will disappear after installation. But if you have a previous version of Caller_id installed, you best uninstall it first : by editing the registry as explained in the forementioned thread, deleting as much files from the previous thread as it allows you to, soft reset, and delete the rest of the files.
I sure hope you understand all this, because if you don't know what php is, don't know what PPC CABs are, then I would advice you not to mess around too much with your PPC internals.
M4io
i know what is cab file.
but i wanted to know weather the file is in zip format cus win zip doesn't recognize it and even when i paste it on my ppc it doesn't install it simply says (there is no application associated with ''caller_id_wwe'' run the application first,then open the file from with in)
sounds like something corrupt during download
clear your internet cache and download again, don't unzip/unrar it, just copy the complete CAB file to your PPC
almost everything is installed with cab, so it would be weird that no association exists. Or during the copying to PPC maybe the conversion went wrong.
I'm really guessing now, just keep trying.
Hello,
How do we run CAB file, i want to install a software which is in CAB files and when i click on it, i am getting this message " there is no application associated with (file name). Run the application first, then open this file from within the application"
Any Idea ?
Thanks[/b]
woolies said:
Hello,
How do we run CAB file, i want to install a software which is in CAB files and when i click on it, i am getting this message " there is no application associated with (file name). Run the application first, then open this file from within the application"
Any Idea ?
Thanks[/b]
Click to expand...
Click to collapse
A CAB-file can only run on your device...You have to copy/paste it into your device as is ( my documents or so ) find it using your file-explorer, tap it, and it will install... :wink: hope this helps...
BTW it is not a zip-file. though it looks as if it is on your PC, just FYI...
I have tried tihs and this message i am getting " there is no application associated with (file name). Run the application first, then open this file from within the application"
Help !!
Thanks
woolies said:
I have tried tihs and this message i am getting " there is no application associated with (file name). Run the application first, then open this file from within the application"
Help !!
Thanks
Click to expand...
Click to collapse
Is this on your device ?...hm if it is, you may have to nename the file, "...".cab
Tried this one as well, Same message, i am kinda down
Help me
Thanks
Tried this one as well, same message
Help me
Thanks
woolies said:
Tried this one as well, same message
Help me
Thanks
Click to expand...
Click to collapse
What OS are you running ?
Windows mobile 2003 second edition version 4.21.1088, i have MDA Compact
woolies said:
Windows mobile 2003 second edition version 4.21.1088, i have MDA Compact
Click to expand...
Click to collapse
may I ask which cab. it is, could maybe take a look at it
Ohh sure, that will solve my problem, have you seen other post regarding the today screen, its only that, the program we need to modify the today screen its in cab file, and as you said i did but same message coming up .
i am gonna paste the link here, and you can have a look please
http://forum.xda-developers.com/viewtopic.php?t=27331
000CAB3C.001
000CAB3D.002
000CAB3E.003
TOGGLE~1.000
These files i have downloaded, it says 000CAB3C so i think its CAB file,
You can have a look aat here as well
http://forum.xda-developers.com/viewtopic.php?t=26468
If you find something please let me know
Thanks m8
woolies said:
Ohh sure, that will solve my problem, have you seen other post regarding the today screen, its only that, the program we need to modify the today screen its in cab file, and as you said i did but same message coming up .
i am gonna paste the link here, and you can have a look please
http://forum.xda-developers.com/viewtopic.php?t=27331
000CAB3C.001
000CAB3D.002
000CAB3E.003
TOGGLE~1.000
These files i have downloaded, it says 000CAB3C so i think its CAB file,
You can have a look aat here as well
http://forum.xda-developers.com/viewtopic.php?t=26468
If you find something please let me know
Thanks m8
Click to expand...
Click to collapse
Ohh I know that one, that's Vijay's nice little thingy, well you want them all I assume, so be sure to empty your browser cache, then download this one... http://www.vijay555.com/vj/ToggleToday/VJToggleStuff.cab
Then sync with your device....copy and paste the file as is into your device, in "my documents", disconnect your device from sync, then use your file-explorer ( the default one ) to find the cab file, tap it, and it installs...have just checked it, it works just fine... :wink:
Hello
I am really sorry to say that i am getting same message "there is no application associated with (file name). Run the application first, then open this file from within the application" I think i have to istall a software which can help me to run these files ? because it says "NO APPLICATION ASSOCIATION WITH " and i see these files like open with icon in computer (see Attactment) now i dont really understand what should i do ,
Please
Thanks[/b]
woolies said:
Hello
I am really sorry to say that i am getting same message "there is no application associated with (file name). Run the application first, then open this file from within the application" I think i have to istall a software which can help me to run these files ? because it says "NO APPLICATION ASSOCIATION WITH " and i see these files like open with icon in computer (see Attactment) now i dont really understand what should i do ,
Please
Thanks[/b]
Click to expand...
Click to collapse
Are you absolutely sure that you copy this file as it is to your device ? and you have not made an attachment to cab. extentions on your desktop, so that it renames the file in transfer ? The only time you will need to click the file, is when it is in your mini, "my documents" folder, not before...!
If you are sure about the above, I mean sure..!!! Then maybe it's time for you to do something serious about your OS, 'cause then you have a problem..
...use cab installer and associate files with it!
...then try to disable the setting and see if system setting is restored
Its now fine, i was doing mistake ....Actually i was unzip the file first then i transfered the file, you mentioned AS IT IS helped me alot.
I really appriciate your help...and THANK YOU VERY MUCH !!!!!!!
With this small tools,you can specify the folder you want the CAB to be installed to.
Just copy it to you PPC,and run it.You can associate this tools with CAB file so that next time you click a cab on your PPC,the cabinst will take over the rest work in your will.
Thanks alot mate, its really helpful !
woolies said:
Its now fine, i was doing mistake ....Actually i was unzip the file first then i transfered the file, you mentioned AS IT IS helped me alot.
I really appriciate your help...and THANK YOU VERY MUCH !!!!!!!
Click to expand...
Click to collapse
I kinda figured that, but you kept insisting that you did'nt... :wink:
and you're most welcome..
Guys, if you're using ToggleToday, it works fine on WM2003 in Portrait at QVGA.
I'm currently working on the "proper" version which is WM5 and VGA and landscape friendly as well... stay tuned.
V
Hi Guys,
I know on Windows (XP) or other OS, we can install some files "silently", without a setup screen, choosing the install folder and things like that.
Is there a way to install CAB file silently on WM5, I got 2 cabs that I want to install, but dont want the user to "see it install''.
Maybe with adding some parameters to wceload.exe?
Regards,
Molski
Hi!
\Windows\wceload.exe my.cab /silent will install my.cab silently.
Remember to wait for wceload to exit before you try to install a second cab. You must also lower the securitylevel of the device or get the files signed for it to work......
Øystein
I generally use /noui switch.
hi guys,
this is my first time here in xda-developers,
please check this link if u r interested in intall the cab file silently
http://www.codeproject.com/useritems/wm2003cab.asp
[Edit by V: please don't use all caps. I've lowercased you]
Okay it says its a cab. While I am very new to wm phones I have been able to install a ton of other cabs.
When I go to install this fist off it doesnt look like a cab it has the name and the windows flag and .rar as the extension.
When I click on it I get the following.
There is no application associated with "s2u2-0.3-WM5". Run the application first, then open this file within the application.
This is supposed to work with WM6 and I know others here have done it. I am just not so bright when it comes to this and cannot figure out what I am doing wrong. I tried just copying it into the windows folder but that didnt work either.
You have to extract the rar file to get the cab file inside for installation. Pls try again.
thanks
thanks mate works like a charm
I've already flashed to Kumar's latest rom and everything workig fine. I found the cab repository for programs I can add but no threads telling me what to do with the cab after I download it to my PC. Sorry for the NOOB question but I just jumped into this world and loving every minute of it!! Thx in advance!!
Mahknottnee said:
I've already flashed to Kumar's latest rom and everything workig fine. I found the cab repository for programs I can add but no threads telling me what to do with the cab after I download it to my PC. Sorry for the NOOB question but I just jumped into this world and loving every minute of it!! Thx in advance!!
Click to expand...
Click to collapse
Sync your device with ActiveSync. Transfer the cab file to your device. Browse to where you copied the cab file on your device with a file browser (Total Commander, File Explorer, etc.) and then run the cab file (this is within your device, not on your computer).
Welcome to the wonderful world of flashing lol. Im actually suprised that you flashed a rom but haven't read on .cabs yet
Anyway if you have the .cab downloaded to your pc just copy it to your sdcard. Then use file explorer to navigate to where you placed the .cab, select it and it will install. Most cabs will ask if you want to install to device or sdcard, it's that simple. Good Luck
Thanks everyone!!! Im hooked!
Mahknottnee said:
Thanks everyone!!! Im hooked!
Click to expand...
Click to collapse
you could also just drag the file from ur comp to sdcard. then open file explorer->tap the cab file and it'll take u to an install page.