Related
does anyone have the original green TyTn dialing skin I can install on the 8525? or do i need to install the WHOLE TyTn Rom. If it is the latter then how would i go about doing that?
http://forum.xda-developers.com/download.php?id=13433
How about skins from other variations of the Hermes?
Can you use skins from the 8125?
hesh said:
Can you use skins from the 8125?
Click to expand...
Click to collapse
www.paulya.com. I just installed the Ti44_Lime dialer and it is working fine on my 8525. So I am assuming they work with the 8525.
I was pleasantly surprised to find it worked!!!!
hesh said:
Can you use skins from the 8125?
Click to expand...
Click to collapse
I have never seen the 8125 skins. Do you have them to share?
thx!
spanky310 said:
I have never seen the 8125 skins. Do you have them to share?
thx!
Click to expand...
Click to collapse
I really only have one skin and I pulled it from the Wizard forums. I don't remember the name of it. It was a nice skin though. The buttons were bigger and the caller ID pic showed up larger as well. If I can remember the name of it and find it, I'll post it.
UPDATE: Here's the skin I use on my 8125. Works great. Was thinking of putting it on the 8525.
http://forum.xda-developers.com/showthread.php?t=263579&highlight=8125+dialer
I use XBluePad Dialer originally for the Wizard. Works great!
does anybody know a black skin?
Question? Is there a new dial skin out for the 8525 with new rom update with Ptt enabled? The old ones will not work as the icons are missing giving you an error on the PTT
nobody????????????????
Come on guys!! help us out. HTC even released the new rom that has PTT enabled but you can't put the old skins on due to the PTT icons missing!
silverzz28 said:
Come on guys!! help us out. HTC even released the new rom that has PTT enabled but you can't put the old skins on due to the PTT icons missing!
Click to expand...
Click to collapse
I'm in the same boat, I tried using my old E-Ten Dialer + Black Skin + Smart Dialer, however smart dialer doesn't work.
I've tried about 10-20 different combinations and none have worked, I'd love to get a response on this regarding the new ROM.
-AnarchE
more than likely the dialers deleted the dpadmenu.dll and added its own, this will screw up the way that PTT works.. and can even screw up the buttons... so installing a new dialer is not a good idea.. UNLESS you open the cab and remove the dpadmenu.dll... however if you dont rely or use PTT then i wouldnt worry about it..
shogunmark said:
more than likely the dialers deleted the dpadmenu.dll and added its own, this will screw up the way that PTT works.. and can even screw up the buttons... so installing a new dialer is not a good idea.. UNLESS you open the cab and remove the dpadmenu.dll... however if you dont rely or use PTT then i wouldnt worry about it..
Click to expand...
Click to collapse
I am using the PTT. can someone fix us one up?
PLEASE!!!!!!!!!!!!!!!!!!
silverzz28 said:
I am using the PTT. can someone fix us one up?
PLEASE!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
what dialer are you using? better yet, pm me..
actually i had another thought.... instead of changing a ton of dialers you can simply do this.. download Wince cab manager from OCP software, then use that to open the dialer cab... then remove the file dpadmenu.dll, save the cab and transfer it to your phone and install. This will prevent the file from being overwritten...
If you have already installed a dialer that messed up your PTT then try this cab i made that will replace the dpadmenu.. i made a cab as the file is a system file and will more than likely not allow you to copy into the windows folder without throwing a fit..
shogunmark said:
actually i had another thought.... instead of changing a ton of dialers you can simply do this.. download Wince cab manager from OCP software, then use that to open the dialer cab... then remove the file dpadmenu.dll, save the cab and transfer it to your phone and install. This will prevent the file from being overwritten...
If you have already installed a dialer that messed up your PTT then try this cab i made that will replace the dpadmenu.. i made a cab as the file is a system file and will more than likely not allow you to copy into the windows folder without throwing a fit..
Click to expand...
Click to collapse
I guess I am little slow on what to do. These are few dialers I am trying to use but the ptt icons are missing on the phone dial pad. Therefore you cant really use the function of the ptt correctly. I installed these dialer pads and then your file. didnt see a change in the function
yes, i was correct, they did have the dpadmenu.dll in them... i edited them but have not tried them, but all i did was add the dpadmenu.dll to them and remove the old one.
Yes I did the same thing but it doesnt work right. When you click the PTT button it shows your contacts in Ptt. Push them and it connects but the dial pad screen doesnt pop up afterwards like the orginal to see who it is and you can't convert them to cellular or turn speaker phone off or on. Even if you exit the Ptt screen after connect to them and you bring the dial pad up none of the above works still nor has the icons. The dial skins need to be provisoned with all the new icons IMO
I see the hotvoice.exe in the /Windows directory, but it doesn't seem to run for me... nor does it show up as a valid Button assignment. It worked fine on my 8125... did Cingular not include this in the ROM?
hotvoice.exe was linked as the Record button on the 8125. I can launch Notes and voice record from there, I just wanted a more direct way to get there.
Is there a way for me to copy it from my 8125?
Thanks,
Mike
zim2dive said:
I see the hotvoice.exe in the /Windows directory, but it doesn't seem to run for me... nor does it show up as a valid Button assignment. It worked fine on my 8125... did Cingular not include this in the ROM?
hotvoice.exe was linked as the Record button on the 8125. I can launch Notes and voice record from there, I just wanted a more direct way to get there.
Is there a way for me to copy it from my 8125?
Thanks,
Mike
Click to expand...
Click to collapse
What ROM are you on? If you do not use PTT, using the leaked Cingular 2.06 ROM then you can do the following. Remap one of your buttons to the app. You must create a shortcut to it first so that it shows up in the app list when you try to remap buttons. If you do not want to change your normal buttons try Sleuth's PPTFix to use the PTT button to launch the app.
I'm still working thru the info here as a newbie to the ROMS...
My Device info says ROM 1.34.502.1, however I'm not sure that corresponds to the general #'s I see flying around (I have read the Wiki, and while there's a lot of good info, its also written with a lot of assumption that you already know a lot of the lingo)....
Anyway, I have tried linking to the app from the Programs folder..and that link does show up in the Buttons list... but I can't get the app to launch, period
Mike
zim2dive said:
I'm still working thru the info here as a newbie to the ROMS...
My Device info says ROM 1.34.502.1, however I'm not sure that corresponds to the general #'s I see flying around (I have read the Wiki, and while there's a lot of good info, its also written with a lot of assumption that you already know a lot of the lingo)....
Anyway, I have tried linking to the app from the Programs folder..and that link does show up in the Buttons list... but I can't get the app to launch, period
Mike
Click to expand...
Click to collapse
OK, you've got the stock ROM, look for and install Sleuth's PTTFix, create a shotcut to Hotvoice.exe on your 8525, and map the PTT button to the hotvoice app. It will only show after creating the shortcut in \Windows.
I've installed the PTTfix and the PTT button works fine. While this gives me extra buttons, this shouldn't be needed, should it? (ie. any reason why I can't assign Record to buttons 1-4?)
But hotvoice.exe will not launch.. I cannot launch it from the file explorer either.
Given that Record does not show up in the default list of buttons (as it does on the 8125), it seems like it doesn't work, at least not in the default ROM??
Mike
zim2dive said:
I've installed the PTTfix and the PTT button works fine. While this gives me extra buttons, this shouldn't be needed, should it? (ie. any reason why I can't assign Record to buttons 1-4?)
But hotvoice.exe will not launch.. I cannot launch it from the file explorer either.
Given that Record does not show up in the default list of buttons (as it does on the 8125), it seems like it doesn't work, at least not in the default ROM??
Mike
Click to expand...
Click to collapse
Yes, you can change them to whatever you wish, I was just providing another suggestion. I prefer to leave my standard buttons as they are.
Ok, so the basic problem is that it appears that hotvoice.exe does not execute on my Hermes (regardless of button assignment)
I guess the question is whether or not it is supposed to run on my stock ROM? and/or if there is a way to add it.
Thanks,
Mike
zim2dive said:
Ok, so the basic problem is that it appears that hotvoice.exe does not execute on my Hermes (regardless of button assignment)
I guess the question is whether or not it is supposed to run on my stock ROM? and/or if there is a way to add it.
Thanks,
Mike
Click to expand...
Click to collapse
You need a shortcut that calls MSVOICE ( I found this in one of Sleuth's threads)... See below for link to shortcut... Note: you must copy it to \Windows\Start Menu\Programs and map one of your buttons 1-4 to it. I read it will not work on button 5, so if you need to launch an app that you had mapped to its original button, you can remap that to 5 if needed. Note also that you will have a Record icon in programs, it doesnt work if you try to launch it from Programs, only by assigning to a button.
Get it here: http://forum.xda-developers.com/attachment.php?attachmentid=31341&d=1163177903
Weird.. I thought I had tried exactly that, about 5 times
But since it ain't broke no more, I'll stop trying to fix it.
Many thanks for your help!!
Mike
zim2dive said:
Weird.. I thought I had tried exactly that, about 5 times
But since it ain't broke no more, I'll stop trying to fix it.
Many thanks for your help!!
Mike
Click to expand...
Click to collapse
No problem, I found that the difference is in how the shorcut is made. If you look at the content by opening it with Wordpad on your PC for example... you can see differences in the shortcuts... some ppl where making shortcuts to hotvoice.exe and renaming the shortcut to Record.lnk, some were renaming wrong... but this works for sure.
hotvoice.exe not working
Mike & ercave1, I'm also looking into usign the hotvoice.exe. I have the new ROM, even downloaded the shortcut link and nothing happens. Via Resco Explorer, I first unhide the files to view hotvoice.exe. there I find the hotvoice.exe which is 3K, and hotvoice.lnk (14B) I create a new shortcut from the .exe to the start menu. Nothing happens, I used the shortcut that ercave1 recommended and nothing. Looks like the hotvoice.exe in the Cingular 8525 new ROM and perhaps original ROM does not work or is corrupted. Looking at the attributes, hotvoice.exe shows the following: Read-Only, Hidden, System, ROM. Any help would be greatly aprreciated.
kiwikenji said:
Mike & ercave1, I'm also looking into usign the hotvoice.exe. I have the new ROM, even downloaded the shortcut link and nothing happens. Via Resco Explorer, I first unhide the files to view hotvoice.exe. there I find the hotvoice.exe which is 3K, and hotvoice.lnk (14B) I create a new shortcut from the .exe to the start menu. Nothing happens, I used the shortcut that ercave1 recommended and nothing. Looks like the hotvoice.exe in the Cingular 8525 new ROM and perhaps original ROM does not work or is corrupted. Looking at the attributes, hotvoice.exe shows the following: Read-Only, Hidden, System, ROM. Any help would be greatly aprreciated.
Click to expand...
Click to collapse
How are you accessing the .lnk? Use the shortcut from the zip file.
You must place it in \Windows\Start Menu\Programs (this makes it visible in the button map app)
Then remap one of your buttons 1-4 to Record. Soft Reset.
I applied this today on my 8525 without a problem.
Yes, i unzipped the link from the file i downloaded, then i transferred it to the start menu. No luck on that. I also have a program called SKTools and there is an option to configure the 5 buttons of the 8525. It allows me to browse by file or by Alias. I noticed one of the ALIAS is :MSHOTVOICE. I tried that ALIAS along with another called :MSVOICE to no avail (I did a reset BTW). Do you have the new ROM or the original cause im not getting this hotvoice to work at all.
kiwikenji said:
Yes, i unzipped the link from the file i downloaded, then i transferred it to the start menu. No luck on that. I also have a program called SKTools and there is an option to configure the 5 buttons of the 8525. It allows me to browse by file or by Alias. I noticed one of the ALIAS is :MSHOTVOICE. I tried that ALIAS along with another called :MSVOICE to no avail (I did a reset BTW). Do you have the new ROM or the original cause im not getting this hotvoice to work at all.
Click to expand...
Click to collapse
Don't understand what is happening I will try and create a cab to install this... I'm on the 2.06 PTT enabled ROM, but that should not matter...
Record cab
For those having problems creating the shortcut try this...
Install the CAB, then navigate to Start>Settings>Buttons then select one of the four buttons to modify and set it to Record, tap OK and test the button.
Let me know how it goes.
That fixed it for me.
Thanks.
berdinkerdickle said:
That fixed it for me.
Thanks.
Click to expand...
Click to collapse
You're welcome, glad it works!
Glad it worked for you, unfortunately it's not working for me. There must be a thrid party application or setting that must of corrupted the hotvoice.exe. Next time I do a hard reset, I'll give it a try. Thanks again ercave1 for your help.
Hi guys, I am new to this forum but have read and benefitted from some of your posts.
Zim,
Not sure if this is what you are looking for, but the Notes app is setup to do voice records on the 8525. I will grant you this... there are absolutely NO instructions about it in the manual so I had a hell of a time finding it, but through looking around I finally discovered this.
Just open Notes and then click Menu>Show Recording Toolbar. Now you can record voice records all you want and it puts them in your notes folder for review.
Then, of course, you can map any of your buttons 1-4 to the Notes app and, since you selected to show the recording toolbar, all you do is press the mapped button and then "New" and speak.
Hope this helps (someone).
JWP
ercave1 said:
For those having problems creating the shortcut try this...
Install the CAB, then navigate to Start>Settings>Buttons then select one of the four buttons to modify and set it to Record, tap OK and test the button.
Let me know how it goes.
Click to expand...
Click to collapse
cool thanks, this seemed to help.
it is odd for me the record short cut will not work directly but if map the button to it, it will work and as long as you hold the button in. it keeps recording till you are out of time.
as jwpetree said the the other way to use the recorder is to open notes 1st.
now to find a tweak to give more recording time.
Would like to remap the "Unlock" function to the left soft key (originally Calendar).
I dled a program that can do this but I am having trouble locating the unlock feature in the Windows directory. Can someone help me out?
The obvious one, also the incorrect one "KeyLock" doesn't work, I tried.
Thanks, gents.
Try setting>button> map whatever you want
juicyfruit said:
Would like to remap the "Unlock" function to the left soft key (originally Calendar).
I dled a program that can do this but I am having trouble locating the unlock feature in the Windows directory. Can someone help me out?
The obvious one, also the incorrect one "KeyLock" doesn't work, I tried.
Thanks, gents.
Click to expand...
Click to collapse
SL said:
Try setting>button> map whatever you want
Click to expand...
Click to collapse
I'm sorry, but there is no "Unlock" to map? I figure I'd need to know how Windows labels it so I can add the .exe or .lnk to the softkey app.
Am I way off in what I "think" I should be doing?
I did see a tool, somewhere either on this forum or MODACO ( Sorry ) that does this. if you use forum search for unlock I am sure you will see it. Sorry can't remember what it was called. If I find it I will post it here.
I don't know if this is any use to you, but it may give you a few hints on searching the application you want. I haven't used the cab so can't verify if it works.
http://forum.xda-developers.com/showthread.php?t=261277
juicyfruit said:
Would like to remap the "Unlock" function to the left soft key (originally Calendar).
I dled a program that can do this but I am having trouble locating the unlock feature in the Windows directory. Can someone help me out?
The obvious one, also the incorrect one "KeyLock" doesn't work, I tried.
Thanks, gents.
Click to expand...
Click to collapse
Thanks guys. This is what I downloaded:
http://www.8525software.com/component/option,com_remository/Itemid,27/func,fileinfo/id,78/
Seems like it won't take any memory or space but going through every folder in the file explorer, I still can't find the damn Unlock that shows up on the Today screen.
Maybe I should reword, I'd like to take the "Unlock" off the today screen and have it mapped to the left soft key?
i was trying to assign a button to show the desktop
can any one help me with the path to the show desktop
thanks in advance
Start>Today
There isn't a simple way of removing it...
thanks imasri, but i was not trying to remove it but i was looking for the path ie location of the execution file that on clicking will show the desktop.... can you tell me where this file is located in the phone...
If you push the windows button twice, the desktop will be shown...
drgopoos said:
thanks imasri, but i was not trying to remove it but i was looking for the path ie location of the execution file that on clicking will show the desktop.... can you tell me where this file is located in the phone...
Click to expand...
Click to collapse
I would have thought it would be in the main windows folder. I coudln't find it there. Try looking, maybe i missed it.
jonc said:
If you push the windows button twice, the desktop will be shown...
Click to expand...
Click to collapse
Damn thats good to know!
jonc said:
If you push the windows button twice, the desktop will be shown...
Click to expand...
Click to collapse
thanks jonc for the suggestin but that trick is not working for me... may be because i am using wisbar advance to customize my start menu.....
i will try searching for the link in the windows menu folder....
If any one comes up with something please let me know
Not sure if THIS POST will help, but it gives the command lines for pretty much every Control Panel entry (i.e. everything under Start | Settings)....
There is a link to the today screen which you should be able to use in a shortcut on one of your menus....
HTH,
Mark.
mmm..
Read the wiki maybe you find answers:
http://wiki.xda-developers.com/
Mark Crouch said:
Not sure if THIS POST will help, but it gives the command lines for pretty much every Control Panel entry (i.e. everything under Start | Settings)....
There is a link to the today screen which you should be able to use in a shortcut on one of your menus....
HTH,
Mark.
Click to expand...
Click to collapse
Unfortuantely, the "Today" item there is for opening up the Today Screen Settings. I was trying to find such a "shortcut" myself a while back, and never did come up with anything. At this point, I think it can only be done programmatically, by "minimizing all running apps". I haven't looked, but there's probably a pretty simple Windows API call for that.
Similar to what a couple of other suggestions here have been, there is probably some alternative that you can use to get to the Today Screen easily. I use Wisbar Lite, and as such, I lose the Double Click the Windows Button, and simple Menu->Today features. But I found I can configure Wisbar Lite to give me pretty easy access. I also believe it was SPB Pocket Plus that gave me link that I use to program my PPT button to go to the Today Screen on a quick press. Don't know where exactly, that link really is, so I can't investigate how it's actuially done.
Maybe some of the above will help you?
-pvs
Guys thanks for all the suggestions and links...
i have done something else and its so good now...
@Mark Crouch thanks for the link, i am sure those short cuts are pretty handy..
@jlopez0978 reading wiki did not help .. i usually go there first before i post
SO this is what i did...
there is a program from " CHRIS" of the lakebridgesoftware forum
http://www.lakeridgesoftware.com/forum/showthread.php?t=11394&page=3
see the post no. 29......
this program will toogle to the desktop... and its graphics are good like htc touch......
i made a link to this program to one of the hardware button( PTT) and now i can toggle to desktop with one key press
Gopu
Good find!!!
I've installed it on my Hermes now too - you're right, it works great!!!
Cheers,
Mark.
If you push the button on the microphone which comes with the X1, it answers a call. If you push it twice it seems to call the last person you called.
Is there a way to use this button to invoke the Voice Command monitor?
Thanks
I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart
Yep, that's exactly what I have. Best set-up by far.
But when in the car, it would be easier to use the mic button, so I'd like to double up on Voice Command access.
So.. no-one else has managed this either?
at45 said:
So.. no-one else has managed this either?
Click to expand...
Click to collapse
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
I am going to include Cyberon VC 2.0 in my rom but it will be Cantonese since it's my native language.
So, to recap the request was for a way to use the Microphone button as the Voice Command button...
jackleung said:
Take a look at here:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?
derliebewolf said:
What is this goint to change? I searched the registry for a way to use th mic-headset-button as a remote for my X1...which means to map a button, application, etc to it. Is this the way to do so?
Click to expand...
Click to collapse
Beside the "push once', and "double push", a "push & hold" action will call this exe such as Voice commander in my example.
jackleung said:
[HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand]
"Path"="\\Windows\\<what ever program>.exe"
"VoiceCmdEnable"=dword:0
"LaunchAPEnable"=dword:1
"VoiceCmdDuration"=dword:a
Click to expand...
Click to collapse
But this doesn't have anything to do with the microphone button.
Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.
jackleung said:
Do you read? Of course it does if you are talking about the button in the pic
If you "hold" the button, yr X1 will call the exe program specified in this registry. X1 stock rom does not comes w/ any VC program and you have to install one yrself. Of course, if you put in other program like Core player, it will be start if you hold the button.
Click to expand...
Click to collapse
pearls before swine mate....
there are some new members on here lately who need to learn that when a more ePerienced member gives them advice they arent doing it because they like the sound of their own voice
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.
Thanks guys!!!
I've been looking for this for quite a while. Really Thanks! Now just need to try to map this button as next rack in Mortplayer...If i found the way, I'll post it here!
Wait, I'm being criticised for being rude and not searching?
fards said:
at45 theres a good reason why people keep saying read and search, and quite a lot of it is to do with the attitude you've shown here.here.
Click to expand...
Click to collapse
Firstly, where have I been rude? Secondly, this has nothing to do with searching. I would challenge you to find a single thread on this subject anywhere else on the whole internet, started before this one. If you're going to criticise at least make some of the criticism partially relevant.
Jackleung, thanks for the solution, but in response to your manner, if you post an arbitrary reg key (a key which has no logical connection to the described solution) and which doesn't work if the instructions are followed (due to the wrong syntax), you should expect for that solution to be met with scepticism.
Coming bach to the original topic:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Just copy the two files attached to the \Windows\ directory and change the Registry entry as descibed in Post #5 to
Registry said:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\Path = "\Windows\MP-NT.exe"
Click to expand...
Click to collapse
Thats it. Run Mortplayer and give it a try, works perfect for me!
Edit: script is working!
derliebewolf said:
I wrote a script (thanks, Mort!) that enebles the tap&hold (2-3sec) of the Microphone Button to jump to the next track in Mortplayer (if it is running).
Click to expand...
Click to collapse
Hey, thanks a lot!
It seems I will install MortPlayer on my X1. Or is there a possibility to do the same with the media panel?
PS: In the script you write "not yet working". Is that the correct file?
scl_electronics said:
I found it easier just to re-direct the Soft Buttons!!
Left for Voice Command, Right for Comm Manager
Stuart
Click to expand...
Click to collapse
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks
ruddsamuppet said:
Can you tell me where in the settings you change soft buttons. Is it Settings/Buttons? I am not sure what the 6 buttons represent. I have searched for an explanation but haven't found one.
Thanks
Click to expand...
Click to collapse
There are two different ways for the X1, to remap the soft keys. One is via the button settings in the windows settings, which is a global override which causes the buttons not to behave as softkeys anymore, and the other is via registry setting (have a look into the Wiki here), that maps specific applications to the softkeys while in today view - this way, the softkeys stay available in all other applications. I personally prefer the last approuch, because I don't like fingerprints on my screen.
Cab is There!!
estartu said:
PS: In the script you write "not yet working". Is that the correct file?
Click to expand...
Click to collapse
oops, corrected now I got a cab, thanks to AlejandroFefe of ppc-welt.info!
No, this only works with mortplayer as you need the possibility to change the track via an exe file or at least an exe with a parameter (like in my script)...If you find a way to do this with the media panel (which i doubt you will ) we could have it...otherwise not.
Topic continued here: http://forum.xda-developers.com/showthread.php?t=471317
other remote controle
hi derliebewolf,
is ist possible to parse the keypress of other remotes ? the remote of a nokia n95 would be perfect ! did you write the mp-nt.exe ? how did you manage to parse the keypress of the stock headset.
regards
t.