Dopod C800 stuck in boot screen.... plz Help - Wing, P4350 General

Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?

hey my friend the same just happend to meee ;(
Do you found a solution ?

murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom

I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!

Strange... Isn't error 300 about using a RUU flasher on the wrong device?

Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing

murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...

Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?

murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...

Thank u for the quick reply....

Related

qtek freeze after rom upgrade

Hi,
after upgrading the radio,from qtek.dk/software my qtek
ask for sid code and then it freeze up??
I tried hard reset but it just show qtek and then freeze up?
Please help. Hope you all there be sure it is the right rom
upgrade before going ahead. Dumb thing didnt say the rom
wasnt comparable etc. now I and I beieve few of us have been
stuck with a frozen device that doesnt work no more.
Hope those who have the sme problem corrected can help .
Thank you. Urgent reply please.
Yep upgrade ROM First then Radio for more information check the ROM Section in the Forums or http://xda-developers.com/rom/
:wink:

German to English

Hello all,
I bought a T-Mobile MDA Compact and it came with German Windows software...
I don't speak a word of it!
Does anyone know how i can change it to English?
I looked all over the internet but i found nothing to download...
I am desperate as i can't use my brand new phone and i payed quite a lot of money to buy it!
Please help...
Thanx.
Don't be desperate, does this help enough http://forum.xda-developers.com/viewtopic.php?t=46628 ?
M
Dear M,
First of all thankyou so much for replying and trying to help out. However i try do do all u say in the specific link but when i click on MaUpgradeUt_noID.exe and try to run it i get an error saying the file cannot be found even though i can see it on my pc...
HELP (again) and THANX again...
Steph.
Hi Steph,
Are you sure you've extracted all the files from the shipped-rom, with winzip or winrar, to a single folder? You should get files like nk.nbf, enterbl.exe etc. If you got those files, just put the MaUpgradeUt_noID.exe in the same folder. Make sure you allow Act.Sync to connect to your magician via usb. Connect your magician with usb & execute MaUpgradeUt_noID.exe. This should be working, maybe you need to run MaUpgradeUt_noID.exe twice, first time gives error 120 & fixes this, second time it really updates your rom version.
Succes, M
Dear M,
I've tried everything u said... and more!
For some reason i can't manage.
When i try to run the MaUpgradeUt_noID it tells me that the RUU.dll is missing.
I put everything in one folder as u said.
I don't know if it's because the application cd is also in german and i can't understand a thing.
Desperation in all its forms...
Hi fissentzo,
Don't know what you're experiencing, haven't heard this before. I do understand that you want to give up on this. Don't think that's it's your Act.Sync language giving you these errors, but you can always download the English Act.Sync from Microsoft.
Problem is I really have no clue what's going wrong on your side. What happens when you just run the plain shipped-rom? Gives it the error 120 or .... Are you sure it's a magician: device id PM10A or PM10B under start -> settings -> system -> device information -> identity (or something simular in German :-( )
You can try to update it with a SD-card flash, documentation http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash but that can be a hassle too.
I guess you're not living near Nijmegen in the Netherlands otherwise I would've done it for you.
Regards, M
hi guys
i'm download mda copmact II soft from server, but i cannot update my phone to english lang. allways say error.:  ERROR [294] : INVALID VENDER ID
please tell me solution for update, i'm use MaUpgradeUt_noID. but no result. help me please
thank you
siemens man said:
hi guys
i'm download mda copmact II soft from server, but i cannot update my phone to english lang. allways say error.:  ERROR [294] : INVALID VENDER ID
please tell me solution for update, i'm use MaUpgradeUt_noID. but no result. help me please
thank you
Click to expand...
Click to collapse
for the mdac2 use
ftp://xda:[email protected]/Uploads/HTC Wizard/Wizard_RomUpgradeUtility_noID.rar
hi guys
hi man
thank you for help
please tell me, after update to English rom possible unlock my phone????
i don't understand german lang. tell me
thanks a lot
any one tell me please
thanks a lot
siemens man said:
please tell me, after update to English rom possible unlock my phone????
Click to expand...
Click to collapse
I don't see why not.
hi man
thank you for reply mail. i'm try and tell you result. i'm think it's not possible.
thanks a lot
27 said:
siemens man said:
please tell me, after update to English rom possible unlock my phone????
Click to expand...
Click to collapse
I don't see why not.
Click to expand...
Click to collapse
hi man
thank you for help. tested and my cell phone is unlocked. very nice soft
thanks a lot
siemens man said:
hi man
thank you for reply mail. i'm try and tell you result. i'm think it's not possible.
thanks a lot
27 said:
siemens man said:
please tell me, after update to English rom possible unlock my phone????
Click to expand...
Click to collapse
I don't see why not.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

FORMAT FAIL !! during a hard reset.

hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...

p3600 locked, how can i do ? help me !

dear all,
i got a P3600(orange), but now it cann't work by my wrong's operation. i flashed a incorrect rom version before unlock. so it cann't boot and do anything except entering three color screen manually.how can i do ?
please help me and give me some threads pls.
thanks a lot.
joyqing said:
dear all,
i got a P3600(orange), but now it cann't work by my wrong's operation. i flashed a incorrect rom version before unlock. so it cann't boot and do anything except entering three color screen manually.how can i do ?
please help me and give me some threads pls.
thanks a lot.
Click to expand...
Click to collapse
Take a look here:
http://forum.xda-developers.com/showthread.php?t=308691
Thank u very much, i'll try it.
dear tnyynt,
you are great! i got it. my P3600 has came back.
welcome to beijing to visit Olympic Games. i will give your good reception.
mobile: 13910625996
joyqing from beijing

[Q] hi guys help plz

i have htc t8282 phone it's in french i want to change it into english i've been reading how to flash a new rom on the website i think i can do it but i have couple of questions
1= how do know the exact rom for htc 8282 phone?
2= my phone is currently locked do i need to unlock the phone first before flashing or cooking the new rom?
sorry for my english , this is by far the best website i have seen the people on here are very helpful god bless you all
thanks in advance
T8282 is an HD/Blackstone, it does not need to be unlocked but check this guide to make sure you don't brick your device. http://forum.xda-developers.com/showthread.php?t=505377
and this ROM is a good place to start... but try a few to see which you like best.
http://forum.xda-developers.com/showthread.php?t=1191941
i'll read the guide carefully so that i don't brick my device thanks for your help really appreciated if i face any problem i'll post on here
plz how can solve this problem sspl-manual-touchhd.exe is not a valid win 32 application?
thanks in advance

Categories

Resources