hi, can anyone pls help me... how do i increase the volume of ringtones. msg volume is loud bt when i set the same tone as a ringtone its damn slow.. what do i do to increase its volume... pls help!!
rosinasethi said:
hi, can any1 pls help me... how do i increase d vol of ringtones. msg vol is loud bt wn i set d same tone as a ringtone its damn slow.. wt do i do to increase its volume... pls help!!
Click to expand...
Click to collapse
You know, you can actually use full words you know
You're not charged less for not, and it would actually help with you're request when we don't have to decode every word you've used....
As for you're question, when you click the volume icon on the taskbar you have two sliders. One for the speaker volume in calls and one for the ringing volume...
Even with both sliders at top I found the included ringtones pathetic and not loud enough.
You can increase the volume of any MP3 ringtone using (free download Audacity www.download.com) or other audio editing program.
Here are some loud ringtones.
Copy to \my ringtones folder
http://rapidshare.com/files/77032876/loudringtones.zip.html
Related
I am looking for a way to set independently the
pda sound: like for notifications & alerts
phone sound: what you hear wen IN a call
ringer sound: what you hear when you are called, before you pick up
I noticed phone & ringer share the same setting: So whenever I set the phone sound louder (because i am in a loud environment), the earth begins to shake when I receive the next call.
Any help / suggestions :?:
pda sound: System events can be turned on/off with a tick at Settings>Sounds & Notifications>Volume , but the slider affects all system.
phone sound actually is the system sound.
ringer sound: it should be possible to set it separately in WM2003 - I know nothing about it (still PPC2002PE - xda-developers Special Edition ROM v1.2)
By the way, you can adjust the ringer volume in the entire .WAV file with SoundForge or something like that. And then - volume up!
I figured out to change the volume of the wav / mid.
But still: It should be possible to have the three different volumes set separately.
In WM2003 there are 2 volume sliders: system (notifications & more) and phone (phone & ringer)
Have you seen the Freeware called PocketZenPhone, just follow the thread on this forum. It does what you are looking for plus more. Hope this is what you mean otherwise sorry.
I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.
edsub said:
I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.
Click to expand...
Click to collapse
Yes it does, but it is only since the past few pages that this was implemented and works great.
Can someone tell me how to change the volume of my ring tone or alarm tone.
This morning my alarm went off so loud it almost gave me and wife a heartattack.
Is there a way to bring it down a bit??
Read the manual
obionenairobi said:
Can someone tell me how to change the volume of my ring tone or alarm tone.
This morning my alarm went off so loud it almost gave me and wife a heartattack.
Is there a way to bring it down a bit??
Click to expand...
Click to collapse
:shock:
Install a register edit program like PHM REGISTRY EDITOR:
http://www.gpspassion.com/upload/regedit.Mrln_ARM.CAB
Find the DWORD key called " RING" ( default @ \HKEY_CURRENT_USER\ControlPanel\AutoPickUp )
and change the value to 5 instead of 3 initial.
The ring volume will be now louder !!!
Sorry for the wrong answer, I thought you would make it louder than default.
So just drop the volume down with the button !
:lol:
It works ! Thanks.
This morning I woke up with a more civilized volume
(didn't scre the hell out of me)
Hi,
I just got my HTC Hero and I am using a standard ring tone from the phone. (standard 4 to be precise)
The only thing that bothers me is that when someone calls me, this ringtone has a small amount of time between the two rings. I would prefer the ring, then a pause, a ring etc etc.
Can I change the pause between the rings?
get an audio editor (audacity), open the ringtone, add some silent to the end, save it, use it. while you're at it convert it to ogg, minimizes the delay.
I don't want to use any 3rd party tweaking app but what is the registry tweak to increase the volume in call. I think it is too quite and cannot hear the other person that much despite puttling volume to max on phone.
Thanks!
Think the volume is fine on my phone, but sometimes when ear isn't positioned correctly from the speaker the sound level does change quite a bit so maybe take note of that first.
tboy2000 said:
I don't want to use any 3rd party tweaking app but what is the registry tweak to increase the volume in call. I think it is too quite and cannot hear the other person that much despite puttling volume to max on phone.
Thanks!
Click to expand...
Click to collapse
Try this:
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: InitVol
Default: 2 change to 10
Thank you. I don't really notice a different. Are you sure this is the correct reg tweak please?
Thanks!
This works on my 6.1:
HKCU\ControlPanel\SoundCategories\Ring\AttenuationCategory set the value to 4
HKCU\ControlPanel\SoundCategories\Ring\ InitVol set the value to 5
HKCU\ControlPanel\SoundCategories\Ring\ Speaker set the value to 1
increase in-call volume. thank [email protected]
can anyone confirm if these settings work?
ok...Installed WP7 + Magldr 1.12 and works perfect. Very Loudest Ringtone and Systemtone without Earphone.
Activate works perfect. Thx Microsoft German Support!
But i want use my InEarphones and listen Music and now its to low...!
I found the Registry Entrys but how make the Volume for Music higher? What is the right Entry for this? Anybody helps?
I need music music volume higher...
Thx DarkForcesTeam for this work...
It's completed mess with volumes.
1) Media & ring volume are too LOUD
2) System notifications with same level like 1) are too LOW
Just use the rocker switches to adjust volume level
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
What is this?
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
Whut?
Rocker Switches?
Wrong forum, ffs why are people still posting crap in the dev sections??
Thread reported!
Mine is stupidly loud on ringtones and media etc (to distortion), and it's also too loud through headphones.
When I say this I mean that the loudest setting is over the top and not much use since it's distorted - that's fine, I just won't turn it up that high - simples!
But the problem is that on the lowest setting (1/20) both ringtones and media are still too loud for what should be kind of barely audible. Now that is not easy to workaround so I'd love to sort it out.
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
If you happen to find that thread again please post it here as I would really appreciate it.
Kenichi
i did the registry edit too but speakers sound awful still when i want to turn it up a bit to listen to music or videos.... very annoying
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Heimiko said:
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Click to expand...
Click to collapse
any way of entering this in the phone ?
as a regeditor or something ?
Confirm this works a treat, here is the reg editor
THUDUK said:
Confirm this works a treat, here is the reg editor
Click to expand...
Click to collapse
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Heimiko said:
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Click to expand...
Click to collapse
I think I just fixed this. I saw a registry edit for WM 6 & it the directory still exists.
HKCU\ControlPanel\SoundCategories\
In each of it's sub directories, change the InitVol value to 100. I notice some were 100 already while others were 85 or even 65. I think this means 100% volume/85% volume/65% volume. Change them all to one value & you'll equalize the volume across the board.