Hi,
Does anybody know how to determine programatically how many bytes have been sent over a GPRS connection?
It must be possible, as there are commercial software applications which monitor such information, but the basic API functions I can find on the Microsoft site, such as ConnectionManager, don't seem to do the job.
Many thanks for any help,
John.
P.S. I'm using an Orange M2000 (Blue Angel) Windows Mobile 2003 Phone Edition.
I have recently upgraded form a Sony Ericsson K750 to a Qtek S200 (ROM 2.9.7.24). I used to use Floats Mobile Agent to sync with my PC via Bluetooth, but also get notifications of text messages and phone calls direct on to my PC.
Obvoiusly activesync takes care of the syncing issues (although not wirelessly) but the notifications were really useful when you have your phone on silent in the office.
The point is that for some reason i cannot get my S200 to connect to Flats Mobile Agent. I can pair my device with my PC but fma will not connect. I suspect this has something to do with Windows Mobile 5. Has anybody managed to et this to work?
Thanks
LeoPheonix
I used to use Float's on my SE T610 and K700i. Absolutely loved it.
I think the answer to your question is that FMA does not support windows mobile 5 devices. It was built specifically for the SE T610, k700, k750 etc. wihch uses a different OS on the phone. FMA also tends to use OBEX transfer to specific directories on the phone to access text messages and stuff. Windows mobile uses databases for it's message storage.
Check out the support page on Sourceforge under supported phones.
Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.
ash3012 said:
Hi everyone.
After searching through the forums, I couldn't get any satisfactory answer.
1) I have THD and Elfin - both WM devices. My question here is, how can I transfer files ( like Fotos, M$ office Documents, Music etc. ) using WiFi or to be precise WLAN? I do not wish to use Wireless internet to send files....I mean to say, without using any thrid wireless device, how can I enable file sharing between these two devices??
I have checked out Resco file explorer and Total Commander. None of them provide option of FTP over WLAN/WiFi.
2) Similarly, how can I transfer files between my WiFi enabled Laptop and THD/Elfin???
Is there any setting to be changed in existing devices, any 3rd party application?? or is it a call for Developers?
Big Thanks Ahead.
Click to expand...
Click to collapse
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
I preffer FTP protocol as there are many clients on Windows/Linux. On my blackstone I use Mocha FTP Server (freeware). Total Commander CE does support FTP (only as a client). Transfer rates are rather slow.
tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.
ash3012 said:
Thanks Guys....that was really quick. Just 1 question though - does this method solves my first problem - file sharing between two WM6/6.1 devices using WiFi ???
Thanks Again.
Click to expand...
Click to collapse
Well yeah, you can browse to a network share with e.g. Total Commander. So it should work once set up properly. Going to try this myself!!
Pardon me if I'm asking for too much.....can we have something like VoIP or to be precise, a radio communicator using such 'WiFi/WLAN between 2 WM devices'? It will be fun to communicate with friends in a 'trucker' style within WiFi range - 10-4 ?
tnyynt said:
Here: http://pocketnow.com/index.php?a=portal_detail&t=news&id=6825
Click to expand...
Click to collapse
Dude this one dosent seems to be working with WM 6 (for my Elfin) [at least the link says so ] Can you please confirm?
Thanks ahead
True... I cannot install it on my blackstone...
Yes you can....I have installed it on my Blackstone and me Elfin too (after upgrading Elfin to 6.1). And it works.
However, I am still not able to transfer files (using WLAN) between my Elfin and blackstone. Any ideas on that??
Thanks Ahead
Hi guys,
I am extreamly happy to say that i have been able to share files from one windows mobile to another windows mobile that too at the speed of up 450kbps.
i had been trying to do this for atleast 2.5 months with no luck(u may check the related topics, nobody had a idea, Even using xda, google, bing, yahoo, altavista found that nobody has done it before...) but yesterday i made it to work the way i wanted to.
All you need to do is create a adhoc connection(e.g P2P) and download FTP server (Yes your mobile will act as a FTP server) and FTP client.
For FTP server download mochasoft and for FTP Client download resco.
**Once you install resco 2008, go to menu-->options-->addins--> then download ftp plugging(and it will make resco to work as a ftp client)
Mobile A
Start--->settings-->connections-->add new ->name it p2p-->select the option "this is a device-to-device connection(adhoc)...once it is done, turn on wifi on Mobile B it will detect this connections, connect to it.....Now two mobiles are connected with each other via wifi(Without router).....Till this point you can find it in google.
Now to share files open mocha soft on Mobile A(It will show that it is "online" with a specific IP address(Note down this ip address), Anonymous login will be on but preferabaly create a user name (File--->settings--> Add[*give it a read/write permission]) and the password.
Then decide for yourself what exactly you wanna share with the other mobile, in this example i am going to share my SD CARD. Go to file -->settings--> other--> and in the "Login Folder:" put in "\\storage card"
Once that's done open up resco ftp on Mobile B. Go to My ftp locations-->New ftp session--Give a name to ftp session (like abcd), In the host type in the ip address address that you noted down earlier--> let the port 21-->Login:ut in the username that you created-->Password: put in the password
and Hey there you go!!!, you will have the Sd Card of Mobile A and you will be working on it as if it is in your own mobile..
....Cont...
On mobile A moccha will notify you that a user has logged on to your server. You can use all FTP commands on mochasoft.
I downloaded the 700Mb movie which was stored in my frnds mobile while we were having beer and it got downloaded at the speed of 450kbps(it started off with 350kbps and was fluctuating from 380 to 450kbps), Just before doing this i tried to copy a 10mb file using bluetooth and resco showed the speed 20kbps........
So next time when you go out to meet your frnds you can transfer all their stuff at the lightning speed via WIFI file sharing......
Good Luck!!
If i got to settings connetions i can only create a modem or VPN connection..nothing with ad hoc..what am i missing?
If I remember correctly, you set up an adhoc network as if you were to enter a custom network with a hidden ssid. You enable wifi and go to the screen where it shows the available networks. There you can add a new network and tick this is an adhoc connection.
Also, since adhoc connections have no dhcp server, it is best to work with fixed ip addresses.
Sent from my GT-I9100 using Tapatalk
Hy guys
I have a little question and i hope that you can help me.
I don't understand why if i'm connection with my smartphone to internet with my wifi connection i can only see the mobile version of some sites.. This is for me a problem because:
1 some websites that i see are very different between mobile and standard version and i can't switch from mobile to standard in some cases (only some site allow me these).
2 in Italy some.sites of news about sports and general news request a payment to see the news..but only if i see this notice.from my smartphone.. If i see the normal version i dob't pay.anything...this is a classic incredible Italian story..no comment!!
I remember that with other device if i'm connecting by my wifi i can see a normal web sites...
Some.people can explain and help me?
Thanks in advance!
Sent from my GT-I9000 using XDA App
Sites with mobile versions will usually automatically link you to them if they detect you are on a mobile browser. When you connect to a website they have access to what operating system you're running and what browser. Once it sees you're running a mobile browser, they redirect you.
Sent from my GT-I9000M using XDA App
photo taken using camera at 5MP (2592x1944)
send via bluetooth (BT) to PC
the photo get resized , received at PC not 5MP anymore
please advice how to disable this "auto-resize" function for photo send via BT
I have the same problem
I use a small workaround,
my bluetooth stick supports connecting my mobile via fileshare service, so I can browse my mobile contents and copy them manually to PC, much like the file share service on your device but in reverse.
you can always import those photos using your USB, or sending them using android if you have a version installed
Dr.Move said:
I have the same problem
I use a small workaround,
my bluetooth stick supports connecting my mobile via fileshare service, so I can browse my mobile contents and copy them manually to PC, much like the file share service on your device but in reverse.
you can always import those photos using your USB, or sending them using android if you have a version installed
Click to expand...
Click to collapse
Thanks for the idea , I also got idea kinda like ur way
but I wan easy way , trying to fix/disable the "auto-resize" function
no solution ???