Related
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
rranjaa said:
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
Click to expand...
Click to collapse
Try to get the phone into bootloader and flash the orignal shipped rom and for gods sake and for the sake of your expensive handset read the post by our moderator meschle right at the top before even attempting to flash.Hopefully you may retreive it.
My prob is bootloader
the bootloader when invoked says searching for sd card but then it goes to a tri color band display n nothing happenes
does anyone has some advice
is this boot loader can be invoked from desktop using the prog (mtty.exe)mentioned in ur forums (im not IT savvy)
Please help
is ur phone cid unlocked? try t-mob. shipped rom. it helped lot of people
Even I get the t-mob rom how do I flash it? thats my problem
for god sake use search. read wiki. here is at least dozen of threads like yours
I am searching thru forums but no answer
Tried some steps using mtty.exe as advised in forums but nothing happening
Sitting in front of the computer straight 19 hrs but in vein
Its Alive
Hi I would like to inform very happyly My dopod p800w is alive.
Yap managed to restore it with original shipped ROM.
Actually I was trying to flash it from SD card which I couldn't with out knowing I can connect USB cable when it is in bootloader tri color band and straight away start by double clicking the EXEfile of original ROM
After PHsnake told me to search I found this thread http://www.spv-developers.com/forum/archive/index.php?t-469.html
and these instructions
Arc
07-25-2005, 01:12 PM
1)Disconnect from USB cable
2) switch off telephone
3)hold CAMERA key (key on right side of phone)will start in 3 color mode
4)plug in USB cable
5)start ROMUpdateUtility.exe and follow instructions
which I followed in my Dopod P800W and damn it it worked. So happy. Nice to get stuck and find a way out of it. Wish all of u happy Tappings. Thank u
Dear mates,
I have a T-mobile MDA compact (magician). How can i hard reset it?
Somebody, tried to update it, which was not succesful.
When turn on, it shows on display.
Serial
v1.02
Best regards
Dear mates,
I found it in forum, how to reset.
But problem is not solved.
When i hard reset it, after set up customization, i get same screen.
Serial
v1. 02
And if i try to attach it with computer.
It displays on screen
USB
v1.02
Any solution please.
Best regards
DO you get the multi coloured boot loader screen ?
If you have then you can reflash the rom yourself and put it right
Read the stickies to find out how to do it
[email protected] said:
Dear mates,
I found it in forum, how to reset.
But problem is not solved.
When i hard reset it, after set up customization, i get same screen.
Serial
v1. 02
And if i try to attach it with computer.
It displays on screen
USB
v1.02
Any solution please.
Best regards
Click to expand...
Click to collapse
try again but don't press those 3 bottons too long...
theoneeye said:
DO you get the multi coloured boot loader screen ?
If you have then you can reflash the rom yourself and put it right
Read the stickies to find out how to do it
Click to expand...
Click to collapse
No i do not get multi colored screen during hard reset.
How to put it in bootloader mode? I try but do not get.
@ Ronald
I have already tried about three times to reset but during setup customisation , get problem back.
BR
Magician bootloader has no multicolor bootloader. When you see Serial/USB v1.02 you already are in bootloader! If you'd read the Wiki you'd have known!
Furthermore I'm pissed at people who ask dumb question a thousand times (oooh mommy, how do I pee?) and then have the nerves to simply answer their own threads with "Oooh... I found out" - end. They should either be quiet or correctly answer their stupid questions fully (ok mommy... although my trousers are already wet I found that white thingy in the bathroom). That would help other dummies searching for their simple answer. But wait, newbies don't search - I forgot.
And now to those ppl who want to come to first-posters defence: there's no excuse. You can't miss instructions for the first steps. And newbies usually don't ask which CPU register points to the stack.
Chatty said:
Magician bootloader has no multicolor bootloader. When you see Serial/USB v1.02 you already are in bootloader! If you'd read the Wiki you'd have known!
Furthermore I'm pissed at people who ask dumb question a thousand times (oooh mommy, how do I pee?) and then have the nerves to simply answer their own threads with "Oooh... I found out" - end. They should either be quiet or correctly answer their stupid questions fully (ok mommy... although my trousers are already wet I found that white thingy in the bathroom). That would help other dummies searching for their simple answer. But wait, newbies don't search - I forgot.
And now to those ppl who want to come to first-posters defence: there's no excuse. You can't miss instructions for the first steps. And newbies*usually*don't*ask*which*CPU*register*points*to*the*stack.
Click to expand...
Click to collapse
Thanks for info.
Please try the steps mentioned in this Wiki page. If it stops in the middle with an error you probably have an hardware error and are out of luck. If you succeed you should have a "brand new" Magician.
Thanks,
Now i have a brand new Magician.
You can understand what i mean.
Br
information
i just want to know what do u mean by EXE file when u say : Before trying any of the below, put your Magician into Bootloader mode (Power + Camera + HOLD Soft Reset) and run the EXE file directly
ruu
i don't find ruu.dll???
Hello Everyone
I need big time help. I just bought Hp 6945 and I tried to update GSM rom from 1.02 to 1.08, while updating it says update fail and try to restart Ipaq and start again. Now My problem is Ipaq just stuck to Hp invent logo. I tried to reset and hard reset and remove battery but notthing work.
I need help
Could some please help me to How to fix this problem?
Thank you
same BS happened to me. the only way to fix it is to load the UK 6915 ROM. thats the ONLY way to fix it. AVOID this update do not try to update the radio. I bricked my phone doing this. STILL looking for a solution. Radio stack is daamged.
where Can I find Uk 6915 rom
Thank you for reply. Where can I found the UK 6915 rom. Is there any instruction to How to load rom?
Thank you
If is FIXEDDDDDDDDDD
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
No network connection
Ok everything work fine, but Now I cann't connect to tmobile. It keep showing me no service.
Any Help please
Ok It is fixed again
There is another update at HP website, which is software update. After installing that everything working fine.
can anyone help? i just bricked my ipaq 6965 too. had already followed those few instructions without any success.. what do you mean by "with or without SIM card"?
After a soft reset, mine's stuck at the initial blue/white boot screen.
Hard reset doesn't work (assuming its call + hang up + power + poke reset).
Ideas?
bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845/Ipaq_HW69XX_ENG_ROM.zip.html
download files from rapidshare posted by me ,r tested on my phone
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
garyakw said:
hi i have tried to dl the rom asi having the same prob but the file cannot be downloaded. is there any other way to get from you
Click to expand...
Click to collapse
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
i get error 402.... times out and no can do.... what was that about german language... maybe i just need it spelled out. which screen does the unit need to be in. there is two... monochrome serial vs usb and there is the hp logo blue and white screen frozen indefinitely... please help i love this phone...
Hi, the rapidshare file is missing!
Could you give working link or send me the file to mail, please?
ipaq dude said:
Ok
I got it fixed, very simple solution
found it here
http://pdaphonehome.com/forums/hp-h...dowloaded-rom-update-ipaq-dead-need-help.html
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider
Click to expand...
Click to collapse
Man,r u sure the above can work well???? Confusing......I did the above like u indicated,but it's not work on my device HP6915,could u make it in details how u fixed the problem of updating ur device,thanks!
Regards,
Brose
Thanks, This help get me out of freeze
Thanks for posting this link. It brought my hw 6945 back out of the freeze. Stay away from HP's site update. Bad news
johnnynomadic said:
in reference to
Default bring back to life hw6945
i'we tried like you to upgrade radio part and a got an freezed phone
Solution for repair was flashing firmware with this program..
Download-Link #1: http://rapidshare.com/files/96527845...G_ROM.zip.html
its a no go here...
Click to expand...
Click to collapse
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Maybe
Most Likely Yes
bmw2320 said:
Thanks for UNIEXITBOOTLOADER thing, it makes my 6965 rocks again! Btw, could this file be used on other pdaphone such as O2 Atom? Thx b4.
Click to expand...
Click to collapse
cdguider said:
Most Likely Yes
Click to expand...
Click to collapse
I don't think so,Curtis.....But as I know most of dopod device hardly be dead....
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time
Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.
Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol
Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up
I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks
need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas
kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...
I flash this phone with a wrong image, and now only a white screen appear.
Is impossible to make any key combination to get to the "download screen" or "update via k3img.bin".
But if i connect the cel via activesync I can see it on the desktop via trueconnection or any other remote control software (the cel is "working").
Some days ago, i make a dump of this cell and I have it on my computer (via pdocread), so my idea is to use the pdocwrite to at least write the first part00 to reprogram the buttons, so i can use a k3img.bin (in chinese... better than nothing) again.
But the software says that the partition is write protected, and I try almost all ways to unlock the Extended_ROM on windows and still says that is write protected.
Can u, masters of the cell phones help me?
Im facing the very same problen, so if some more knowledged might help us.
As Beastworm already described - I am too unable to get Download mode because of wrong button mapping.
nobody?
Beastworm said:
nobody?
Click to expand...
Click to collapse
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Amaly said:
Perhaps this programm can help you
k3 first aid kit
http://www.mobileuncle.com/thread-8799-1-1.html
I havn't tried it myself
By the way, did you make a hard reset after flashing? (Volume down + red + power.
Click to expand...
Click to collapse
the buttons don't work. I will try the software now.
edit 1: Can u upload the software to megaupload? i don't have permission to download in mobileuncle
edit 2: OK, i reply and then i can download...
i connect the phone and nothings happend
Could you upload that software to somewhere else Beastworm ?
I'd like to give it a go.
tell me a good site to upload. Some people have troubles with rapidshare, others with megaupload, and others with others sites.
Tell me a site and i will upload.
here is the file
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
JokinenK said:
Thank you very much - It seemed to work on my phone !
Im in great debt to you guys for helping me out.
- Kalle Jokinen
Click to expand...
Click to collapse
what u do?
and, what .img u use to reflash the phone?
I installed the app, connected the phone & waited until it was recognized as windows mobile. Started the IDT before the first aid kit & used image: P638M30_TH_UI1_L12_C7_CHS_MFGW_WM650_C02SPC002R01_091203.bin (WM6.5 Chinese).
After the IDT was waiting for the phone to connect, I started up the first aid kit & simply clicked Download mode and the IDT took care of the rest.
It took me two flashes to get it right, but after that it's been working as expected.
Im not sure, but if you're running either windows vista or 7, you might wanna run the first aid kit as an administrator.
nothing, i am in windows 7 (and running it as administrator) and the download mode button is still in grey
I will search for a xp machine and try again.
btw. The 6.1 chinese rom, have a good button mapping.
Do you mind sharing that working 6.1 image? And I hope you can revive your phone with some xp machine!
let me find it.
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Amaly said:
I dumped a working 6.1 English, but only the *.raw-files. I don't know how to get them together to a working image.
It's from a 01.001.IP638 EN, RomDate 9/15/2009, Radio Version 1.07.9235, Protokol Vers. DV3.0
Click to expand...
Click to collapse
i have a dump of a english too. But I don't know how to convert it as a .bin too
NEWS: MY PHONE IS ALIVE AGAIN (in a windows XP machine)
but.... i flash another bad rom , and now all is flipped like a mirror (and the buttons are still bad mapped )
The K3 First aid kit don't work now (it recognizes it, but when i press "download mode" the phone don't restart). Is a very clean spanish rom of 6.1, so i think that p638chinesestuff.cab that is installed when a hard reset is done, is the responsible to k3firstaid work.
So i will try to extract it from the dump, and install it on the phone, and try to reflash again.
Why I flash a bad rom?... i have a file with the name "K3imgCHI61.bin" and I think thats was the chinese 6.1.... but not. It is the Chilean (my country) 6.1
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Amaly said:
Fine, that your phone is alive again.
I read somewhere (I don't now where) that somebody solved the problem with the mirrored screen after flashing a new rom. He made a hard reset and after aligning screen everything was o.k.
Click to expand...
Click to collapse
I can't find the hard reset combination of this rom via buttons
And the startup clean via settings don't work.
can someone send me that p638chinesecharacters.cab file what is installed in the phone during a hard reset?
i try to extract it, but i can't