I have Cingular 8125 WM6 with Voice command. I can hear the phone ringing through my headset, and can hear my voice command and it works fine through the headset, however when I make a call no sound will come through my headset even though the hands free symbol is being shown, and the person I call cannot hear anything at all. Anyone have any ideas? If I make a call with the headset off and then turn it on it will work fine and if someone calls me I can listen to it through the headset fine, the problem comes in trying to call them myself.
Related
I am using the Bluespoon AX with the JasJar. It uses the hands-free profile.
The most annoying thing is the phone does not ring when the headset is in connected mode. It makes the headset ring, but that requires me having it in my ear all the time.
Is there a registry setting or something that will make the phone ring as well?
I'm using a Jabra BT200 and my headset rings as well as the phone when I receive a call, which is effectively what you're looking to do.
Anyone else have theirs do this already?
I have the Moto HS850 - phone rings as well as headset with an incoming call
I have the SPV M600 and I use the Nokia HS-12W. A2DP works fine and the appropriate wireless stereo and headset profiles are loaded. The problem is when listening to music and a call comes in, the music stops playing and I can accept the call, I can hear the caller but they cant hear me, I've checked to ensure the mute function isnt active on either the phone and the nokia headset but no matter what I do, the caller cant hear me. This happens about 4 out of every 5 calls, its gotten so bad I no longer use the headset for answering calls, just for listening to music. Has anyone seen this before or know why the mic doesnt seem to be transfering audio when I receive a call. Also this sometims happens even when I'm not listening to music and a call is recieved. Do I have a hardware fault wuth the phone or the headset? As i said, it doesnt happen everytime, about 80% of the time.
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
OK I just bought the most expensive bluetooh headset man can find the Jabra JX-10 hoping that I will not have the same problems I have had with all other plantronics and other head sets.
The headset paired and (I guess its connected, there is no indication on the screen)
Here is the problem:
When I make a call, I see the headset logo on the dialer screen. The voice however comes from the phone, not the headset. Then I have to I push the CALL button on the headset to TRANSFER the call. (If my timing is not perfect and I push the button "before" the call is actually CONNECTED and there is someone talking, the phone will simply HANG UP.
Can the phone just send the calls to the headset at all times (unless I am in my car that has bluetooth?)
THANKS FOR ALL THE POSTS!!
I uninstalled touchflo and un-paired and re-paired the headset and it is working properly now.
Im using the headset that came with the titan, the inline corded earbud set.
Something strange has started happening, the mic works fine for voice dialing, and for recording memo's and the button even starts voice dial like it should.
But in calls, no one can hear me talking, I can hear them fine, but unless I unplug the headset, they cant hear anything.
any clues why? seems strange it would work for every apps that uses voice just fine, but not in calls.