T-Mobile USA MMS & XM6r3 - 8125, K-JAM, P4300, MDA Vario General

I have a T-Mo USA MDA with XM6r3. I am not receiving any MMS messages. If I try a send and receive in the MMS messages inbox I get an error synching. Regardless of whether it is supposed to sync or not, I am not getting any MMS messages.
This is what I have setup;
Gateway - 216.155.165.50
Port - 9201
Server address - http://216.155.174.84/servlets/mms
Connect via - T-Mobile MMS (other choices are My work, my isp, work, secure wap, the wap, the internet)
Sending Size Limitations - 300K
Wap Version - 2.0 (1.2 also available)
Does this sound right? Anything else I should be doing?
Any help would be appreciated. Thanks in advance.

This is what I use.
Gateway - 216.155.165.50
Port - 8080
Server address - http://216.155.174.84/servlets/mms
Connect via - The Internet
Sending Size Limitations - 300K
Wap Version - 2.0

Thanks. I have also tried 8080 and a few others without any success. Anything else?

Cymru1 said:
Thanks. I have also tried 8080 and a few others without any success. Anything else?
Click to expand...
Click to collapse
Download network wizard and copy cab file to phone. Delete all current connection settings including MMS settings and then install Network Wizard and run it. Select USA as the country and T-Mobile as your carrier and it will automatically configure it all for you and it will work afterwards. What it does is automatically downloads your settings from the network for a painless setup.

Do you have any internet plan?
had the same problem as you and found out that my internet settings were wrong. Once I put in the correct info, everything was working fine.
I use the 5.99 plan proxy.

inmatekay said:
Do you have any internet plan?
had the same problem as you and found out that my internet settings were wrong. Once I put in the correct info, everything was working fine.
I use the 5.99 plan proxy.
Click to expand...
Click to collapse
You are right about that, but not giving him any information. Network Wizard takes care of everything you just mentioned short of paying for your data plan.

Um... theres no USA option in network wizrd just installed it. A little insight would help.

Thanks to all for the help. Now I can send and receive MMS messages!

Related

Has someone figured out MMS on T-Mobile in the USA?

I've found instructions on their site, and various other places, but no joy. I can make GPRS connections and send/receive SMS just fine, but MMS simply times out.
mms setting tmobile usa
i might be able to help ill post tomorrow with the settings
T-Mobile MMS
First... In order for you to receive MMS messages, your GPRS has to be connected to wap.voicestream.com
2nd in your MMS application you need to point the MMS application to use the wap.voicestream.com profile.
3rd. The gateway address is listed as 216.155.165.050 well.. I'm here to tell you .. that leading 0 messes everything up, just get rid of it and use 216.155.165.50 instead.
This should get you connected.
Brandon
I'm unable to connect to wap.voicestream.com, so it seems I need to get them to authorize it...
What is the server address to put in the MMS settings? I have:
http://216.155.174.84/servlets/mms
Authorize
Yeah.. Have them set you up and let them know that you have a device that uses Picture Messaging.
Well, that works if I manually connect to the WAP gateway and set the MMS software to use "The internet" as the connection. Thanks!
Any ideas on how to make it auto-dial the WAP connection when it needs to, so I can leave the normal gateway as the internet default? Otherwise I have to switch it manually every time I want to use the VPN.
With these settings, it's still not working for me. What should I put for the port number?
Use port 9201
Are any of you getting free internet anymore? I stopped using my phone for a while, but I haven't gotten free internet in a while and its buggine me. Someone suggested signing up for t-zones and then using wap.voicestream.com, but I don;t want to waste the money unless I have to. Thanks.
Port 9201 worked! Thanks, imagine_einstein!!

O2 MMS not sending out

Sorry if this has been answered before (but I can't find a solution).
I have loaded latest o2 rom in corporate mode and entered the MMS config but all I get is :
"Unable to send your message(s). Your message(s) will remain in the Outbox."
The settings I have are:
For MMS settings
server O2UK
193.113.200.195
port 9201
server address: http://mmsc.mms.o2.co.uk:8002
I have a wireless connection at home and am not sure what MMS should connect through (connect via choice in settings).
Anyone have an idea or had the same problem?
Steve
i have had the same problem. never figured out how to get it to send, despite trying lots of things in connection settings, so gave up in the end.
would be interested to hear the answer tho! )
Use your gprs operator settings.. You cannot have any other connection...
hey here are the O2 settings that work for me to enable sending of MMS Messages
in MMS Configuration under servers i have
Server Name O2UK
Gateway 193.113.200.195
Port number 9201
Server address http://mmsc.mms.o2.co.uk:8002
Connect via My Work Network
Then in settings under the connections tab click on Connections
Add a new modem connection under My Work Network
This should be called something like o2 Active connecting using Cellular Line (GPRS, 3G)
Access point wap.o2.co.uk
username o2web
password password
leave everything else as default.
This should let you send MMS Messages, it works for me!
Thanks mjames_84 those settings are working now.
Hope it helps others too.
Steve
ncruz said:
You cannot have any other connection...
Click to expand...
Click to collapse
ah... this might be the problem - i do
i already have a connection setup in both "My Connections" and "My Work Connections"
is there no way around this?
tried deleting the other connection in "My Work Connections" and yup - MMS sends fine now. not sure what i'll do when i need that connection again, but for the moment - yay, MMS fun
One thing I have noticed ....
Even with the settings above - I cannot get MMS to send with "WAP 2.0" selected (default setting) under MMS configuration
As soon as I select WAP 1.2 they send straight away
Anyone else noticed this ?
Hmm I'm not 100% sure on this, but I think if you want to use WAP2.0 you have to specify a different port. I seem to remember that when using personal mode instead of corporate it was set up to use WAP2.0 and the port was different to the settings I had previously written down from my old XDAII....I still used the settings from my XDAII cause I know that they worked.
Can anyone (mad enough) running the full personal installation with o2 Active find out what port is used my default when using WAP2.0 for sending MMS Messages?
Port number for WAP 2.0 is 8080
Thanks Lord Buckingham
Does anyone know what the difference is between WAP 1.2 and 2.0? Is 2.0 faster? better? more secure?
Lord Buckingham said:
Port number for WAP 2.0 is 8080
Click to expand...
Click to collapse
But even with port 8080 selected I still can't send MMS with wap 2.0 selected - yet with 1.2 I can send them via port 9201 or 8080 ! the port number was the first thing I changed when I had problems , from the default 8080 to 9201 (which seemed to be the obvious choice ) so it seems that wap 2.0 just doesn't work for me
very strange ! I'd be interested to know if anyone is using 2.0 successfully (just out of curiousity)
I sent one near the start, but had to reduce the pic size below 100K or something, if I recall....
Anyone confirm what the limits are on O2?
I still cannot get it to send using any of the above settings or the original ones that o2 active install. If I use the o2 3g contract sim that came with it then it sends with NO PROBLEM whatsoever, BUT I don't use my contract sim ever, I use a o2 online sim which I have used for years.
Any ideas?
Is the settings different for PAYG and for CONTRACT ?
If so then I need the settings for PAYG please guys, can you help?
if you are using an old "on line" SIM I suspect that it might be one of the old Genie internet SIMs, so the settings may be different. Try setting the device up as pay and go, so change the APN to "payandgo.o2.co.uk" , username "payandgo", password "password", all the other settings should be the same. If this fails, climb into a large bottle of red wine, sometimes its the only way :wink:
Hey, i couldnt get it to download a message and the fix above worked.
Im assuming that as it connected to the 3g network that it charged me for d/ling the message yeah?
can it to be set to do it when its synced with the computer or in a wifi area?
Cheers
JAmes
Got mine working with WAP 2.0 !!
The settings I have are:
Server: O2UK
193.113.200.195
Port 8080
Server address: http://mmsc.mms.o2.co.uk:8002
Connect via: The WAP Network

Cingular USA MMS Settings?

Just joined Cingular today and am having MMS problems. I've searched on "Cingular MMS" thruout this forum but have not seen any WIZARD USA MMS connection settings. Remember, WIZARD is using WM5 which has a few differences in these setups.
I signed up with Cingular's MEdiaWorks which has data and MMS. I have the data connect working. My settings:
1) My ISP
2) Add a new modem connection
3) Name for connection: <user choice>
4) Modem: Cellular Line (GPRS)
next
5) APN: wap.cingular
next
6) Username, password & domain: leave blank
finish
This works, connects to Cingular data and I've had up to 135Kbps data rates which is definantly EDGE speeds.
Now for MMS, which I can't get working. I also have never used MMS so I'm not sure of it's interaction with connections, WAP and the phone.
I send a MMS message, it connects,is sending and returns with error message:
"Unable to send your message(s). Your message(s) will be saved in the Outbox."
In MMS section, I click of Menu (WM5)-MMS Configuration, up comes 3 tans. Here are my Servers settings:
Server Name: Cingular MMSC
Gateway: 66.209.11.61
Port Modem: 9201
Server address: http://mmsc.cingular.com
Connect via: (I've tried My ISP and My Work Network without success)
Sending size limitation: 100K
WAP Version: WAP 2.0
In searching, suggestions were to set up a "My Work Network" connection as follows:
Connection name: WAP
Modem: Cellular Line (GPRS)
next
APN: wap.cingular
User name: [email protected]
Password: CINGULAR1
Domain: blank
finish
Then they said to set up a proxy server which I did as follows:
Check box "This network connects to the Internet"
Check box "This network uses a proxy server ..."
Leave proxy server blank
Click on Advanced
Set both WAP and Secure WAP to:
Server: 66.209.11.61
Port: 9201
User names, password and domain, leave blank
This does not work.
Interestingly, the two connections (My ISP & My Work network) have the same APN, wap.cingular?????
I read one post saying something like you had to configure MEdia Works on your phone. What does this mean?
Any thoughts in the WIZARD community would be helpful. Does Cingular USA even support MMS for the WIZARD??? Yikes
I haven't even got to setting up Express Mail yet. I'm sure another post is comming.
Thanks all
Craig
Just install this and it should work. :lol:
fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.
cshields1 said:
fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.
Click to expand...
Click to collapse
Opps, my broadband was a little slow in filling out the rest of your message. Got it but I've tried this CAB without success. I'll give it another try.
yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.
see http://www.bengalboy.com/modules/newbb/viewtopic.php?topic_id=42&forum=8 for the settings
fone_fanatic said:
yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.
Click to expand...
Click to collapse
The HTC WIZARD for Cingular is actualy the HTC 8125 model. Do a google search on 'Cingular 8125' and you see lot's of info. Even Best Buy are starting to carry them ...
I signed up for expressMail from Cingular but they don't have the phone client posted on their web site for the 8125 (Wizard). They do have the HTC 2125 (Smartphone) client but don't offer that phone for sale at their site anyway.
I think we're getting closer to the Wizard at Cingular.
best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!
fone_fanatic said:
best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!
Click to expand...
Click to collapse
Cingular MMS Settomgs
Here's a CAB file with the MMS settings for Cingular. It seems to work on my Qtek 9100.
does someone have the same cab file for t-mobile usa (to be used with qtek 9100)
Here's the VPN enabled and without VPN CAB files (USA)
I have attached both the VPN enabled and non-VPN enabled CAB files.
Now that the 8125 is out on cingular, all the mms and medianet settings can be found on the cingular support site. Check it out here:
https://onlinecare.cingular.com/dev...se=cingular&make=Cingular&model=8125&x=26&y=5

Setting up mms manualy, help please

Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris
I also need help for setting up my 8125(wizard) for T-mobile mms...
Thanks in advance
Anything???
I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
http://www.expansys.es/forumthread.asp?code=I-MATE_SP3I_US&thread=9
http://www.voq.com/site/downloads/GPRSSettings.htm#Canada
http://www.expansys.jp/forumthread.asp?code=I-MATE_III&thread=42
http://www.dslreports.com/faq/7418
http://www.canadiancontent.net/forums/about5138.html
http://www.howardforums.com/archive/topic/452397-1.html
http://www.unlocks.co.uk/gprs_settings.php#canada
http://www.taniwha.org.uk/gprs.html
http://discuss.treocentral.com/showthread.php?t=82095
chris267 said:
Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris
Click to expand...
Click to collapse
See my post near the end of this thread http://forum.xda-developers.com/viewtopic.php?t=61529&highlight=
Settings for FIDO?
neptune said:
I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
I have been browsing quite a bit to find all appropriate settings for my XDA Exec to work on Fido in Montreal. I also spoke to customer service; they were kind enough to walk me through basic setup and flip a switch on my account to allow MMS and WAP.
Could you compare your parameters with the following?
Settings/Connections/Advances/Manage Existing Connections
Connection Name: My Connection
Access Point Name: wap.fido.ca
user: fido
password: fido
Domain: 205.151.011.011
Settings/Connections/Advanced/Select Networks/
Programs that automatically connect to the internet should connect using: My ISP
Programs that automatically connect to a private network should connect using: My Work Network
Settings/Connections/Advanced/Select Networks/My MMS
Add Modem named Fido MMS with the following attributes
Access Point Name: mms.fido.ca
user: fido
password: fido
Domain: blank
Proxy settings tab: do not check anything
Settings/Network/GPRS Settings
Authentication: CHAP Authentication
GPRS - Setting: Class 10 (3R2T)
Messaging Settings/MMS
Preferences/OK to Download when Roaming : yes (fido uses also Rogers network now)
Messaging Settings/MMS/Servers
Server name : Fido MMS
Gateway : 205.151.11.13
Port number: 8080
server address: http://mms.fido.ca
connect via: my mms
Sending size limitation: 200K
WAP Version : WAP 2.0
I am getting crazy
Please help!!
Click to expand...
Click to collapse

t-mobile settings internet,mms,data

I 'm new to the board.i've always looked on here for advice though.I picked up a htc maple running wm 6.5.its really nice.I need some help setting up the configurations for receiving mms,data,and internet for the u.s. west coast.i racked my brain trying to try different combinations.i can receive data connection,texting ,but no mms.so any help specific the the three settings on the maple would be great.thanks again, happy holidays
settings
raphyrod said:
I 'm new to the board.i've always looked on here for advice though.I picked up a htc maple running wm 6.5.its really nice.I need some help setting up the configurations for receiving mms,data,and internet for the u.s. west coast.i racked my brain trying to try different combinations.i can receive data connection,texting ,but no mms.so any help specific the the three settings on the maple would be great.thanks again, happy holidays
Click to expand...
Click to collapse
It worked for me when i change it to mms settings: wap.voicestream.com and save and reboot
gprs, proxy settings
i have my mms settings on that also.can you tell me a breakdown of your t-mobile data,t-mobile internet,and t-mobile mms settings under gprs.i also have proxy settings put in.maybe there shouldnt be a proxy? i'm completely stifled. please help thanks
pm'd you
raphyrod said:
i have my mms settings on that also.can you tell me a breakdown of your t-mobile data,t-mobile internet,and t-mobile mms settings under gprs.i also have proxy settings put in.maybe there shouldnt be a proxy? i'm completely stifled. please help thanks
Click to expand...
Click to collapse
check your inbox. those settings should help you out. they have worked great for me in the past.
can post those settins in the forum please. I need help with this too.
if i post them in the forum there will be a debate started.
check your inbox as well.
Settings?
I too am looking for the settings, specially for MMS. Internet and SMS seem to work fine but MMS is a 'no-go.' Oh, I too am on WM6.5... and does anyone know what happened to T-Mo's configuration pages? Now it's a pay service?!?!
yea i need these settings too can someone post them on this page??
these settings are readily available on the internet.
If anyone gets charged any fees for using this dont complain to me. this is not exactly the best setup but it does work. all it is is the tzones proxy work around with a step or 2 added nothing that hasnt been posted before. but still its not my info i'm just passing it along.
In Settings/Connections/GPRS/T-Mobile Data:
Tmobile Data Connects to: WAPNetwork
Access Point: wap.voicestream.com
Add a 2nd GPRS option:
T-Mobile Data 2
Connects to: Work
Access Point: wap.voicestream.com
T-mobile internet
connects to : internet
access point: wap.voicestream.com
T-Mobile MMS
connects to : T-Mobile MMS
access point: wap.voicestream.com
Then create TWO Proxies:
Settings/Connections/Proxy
First Proxy:
Name:Tzones Proxy
Connects from: WAP Network
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Second Proxy:
Name Tzones Proxy 2 Connects from: Work
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
after all of these settings have been completed install this cab http://forum.xda-developers.com/atta...8&d=1253220068 and reboot your device
MMS
http://forum.xda-developers.com/showpost.php?p=5042335&postcount=633
Internet:
Settings/Connections/GPRS/T-Mobile Data and T-Mobile Internet
Access point: epc.tmobile.com
Everything is blank Priomary and Secondary DNS are 0.0.0.0
I have used internet2.voicestream.com for access point as well, but do not notice any difference anymore.

Categories

Resources