I was thinking if there's a kind of case that I could strap on my arm if I want to bring my Kaiser out for a run?
You could opped for a Krusell case/holster, then there is a multitude of options of mounting/strapping.
Related
hey guys, just thought some of u would like to know. i just bought a universal windshield mount for my kaiser from best buy for $30.
http://www.bracketron.com/xmain/phw203.php
it works awesome and the nicest thing is the long arm, so u can have it close to u and not have to reach far
u can buy it here off the best buy website:
http://www.bestbuy.com/site/olspage...etron&lp=7&type=product&cp=1&id=1138084373352
good luck
omar
Custom windshield mount forTreo fits Tilt perfectly
The Igrip custom unit for the Treo fits perfectly. The universals are a problem as the "ears" tend to move apart, dropping the phone. Here's a link for their high-end unit for $29. They also make a custom unit with a gooseneck (actually a thick aluminum wire covered with a sleeve) for $19.
http://shop.treonauts.com/content/accessories/3-78--1781.htm
Kaiser Windscreen Mount
I've previously used the Artemis and now switched to the Kaiser.
The Artemis package comes with a car windscreen mount that has a holder fitting the Artemis to a T.
Came across this website that has a holder which could be replaced to fit the Kaiser to a T. URL as follows -> http://www.mobilefun.co.uk/product/14751.htm
However, it's only available in UK. Anyone knows if it's available in Singapore?
i go every day to the gym and i always leave my kaiser around...
but today an idiot risked to take seat right above my loved device!
so...
i wonder if there is a case designed for who does a lot of exercise someone knows?
Just purchase a cheap cell phone and use it with the same phone number. You don't really need the Kaiser for such occasions.
I too would be interested. Been looking along time for something and never really found one. A while ago someone suggested an Iphone arm band case (can be found at any big box store) but it just does not look "thick" enough for our phone. anyone else?
Wristband
Go to ebay and search Iconnect, they have a nice wrist band for $5.11 with shipping!!! I use it at the gym and fits my phone snuggly and no issues Very satisfied.
Alternatively have a look for Krusell - the offer various options including wrist bands for their leather cases. I use their bike mount - it is top quality.
For the Kaiser you can use
http://www.krusell.se/productMulti.php?productID=2575&category=48
in combination with e.g.
http://www.krusell.se/product.php?productID=2774&category=51
and personally i recommend using the spring clip (http://www.krusell.se/productMulti.php?productID=2562&category=29) instead of the included swivel knob.
It is not especially cheap - but it is certainly quality.
/Mads
Alternatively have a look for Krusell - the offer various options including wrist bands for their leather cases. I use their bike mount - it is top quality.
For the Kaiser you can use
http://www.krusell.se/productMulti.php?productID=2575&category=48
in combination with e.g.
http://www.krusell.se/product.php?productID=2774&category=51
and personally i recommend using the spring clip (http://www.krusell.se/productMulti.php?productID=2562&category=29) instead of the included swivel knob.
It is not especially cheap - but it is certainly quality.
/Mads
I use an ipod armband case, and it works perfectly. The case is designed for a classic ipod, but fits the kaiser just fine. I put my kaiser in the case before I go to the gym, watch videos on it while I'm on the elliptical, and then strap it on my arm and listen to mp3s while I'm doing weights. There's a plastic cover over the screen, but I can still use the touch screen to change video or audio settings.
I'm shopping for a new car mount. I want something with a suction cup that sticks to the windshield or dash - not looking for a vent or cup mount.
I've been looking around at several models, but most of them seem to fit poorly for a Fuze - sides covering volume/PTT buttons & back covering the rear speaker.
I use my Fuze as a GPS device in landscape mode. I'd like a holder that doesn't cover any hardware buttons or the rear speaker. I also use a case once in awhile but not always - so the width should be adjustable.
I have the suction cup mounted type and did not like it.. they seem to wobble/vibrate more than the vent mount ones.. also car theifs will break into you car if they see thesuction mount thing on your dash, as they assume whatever goes on it is still in the car... jsut a warning.. you locat people to not use that type in the Milwaukee area... if you do decide to get the vent mount... Target sells one at the stores for $15 that works well... quick release button and all that... decent quality too (not cheap feeling like some are)
Thank you for your response, you bring up some important things to consider.
I have tried vent clips, but in my vehicle the weight of the phone causes the screen to point downwards.
My wife bought me a universal holder, which the vendor said is compatible with the Fuze. It mounts to the windshield, has a long gooseneck and the holder barely fits the fuze w/o a case. It blocks the rear speaker and the sides cover the volume/PTT buttons.
One nice thing it came with was a disc the size of the suction cup, with some very thick sticky tape on the bottom. While the disc isn't really pretty, it allows me to mount on the dash or even the console - avoiding the conspicuous windshield attention grabber.
I would just like a good, adjustable holder that doesn't cover buttons or the rear speaker.
ProClipUSA
Try http://www.proclipusa.com/
You buy the clip in two parts: vehicle mount and device holder.
I have one and because it fits so well, I never used the double-sided tape that comes with it. Whenever I change devices, I purchase a new device holder.
These are far more secure than a suction cup and all the years I've used these, they never fell off.
I don't have a need for it, but they also have an extension mount so you can mount 2 devices. Really great concept if you have the need.
Although these may cost a little more, they are definitely worth the price.
pischk said:
Try http://www.proclipusa.com/
I have one and because it fits so well, I never used the double-sided tape that comes with it. Whenever I change devices, I purchase a new device holder.
These are far more secure than a suction cup and all the years I've used these, they never fell off.
Although these may cost a little more, they are definitely worth the price.
Click to expand...
Click to collapse
Seconded! I've used the Brodit Proclip for over a year now and had no issues at all.
Thanks for the suggestion!
Thanks, you guys made me take a second look at this vendor.
Would you guys trust the holder to hold the phone if it was mounted for landscape viewing?
eudaemonic said:
TWould you guys trust the holder to hold the phone if it was mounted for landscape viewing?
Click to expand...
Click to collapse
Yes, no problem.
Hi all,
Was wondering if anyone had any recommendations for a nice carrying case for my new DHD and also will be needing a car cradle, would prefer one that fits onto the vent grill rather than sucker type.
Anyone recommend anything?
Thanks.
This is a official holder,
http://www.mobilefun.co.uk/blog/2010/11/htc-desire-hd-car-upgrade-kit-official/a-11/
Cart seem to find it for sale tho, looks good 1 as I don't like the universal 1s
Edit: found it but not available till 5th December
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=205737
you might try this website: PDAir [dot] com
though they mostly have hard silicon cases, they are probably not yet available.
Also keep in mind that with a soft silicon case your GPS and other receptions will be weaker (alteast it is with my soft slicon case, which does not come from pdair, so don't know if that would be the same).
note: the car holder and the leather cases are compatible so you can use them without removing the case. which would be the case with most silicon cases (hard or soft)
Brodit make the best car phone cradles on the market. Check them out.
Does anybody knows some good car holder for nexus4. Vent holder is preferable.
I can find only universal ones.
I have always been a big fan of RAM Mounts due to the quality and variety of arms and bases. I used to use their dedicated device cradles for my devices, but their new XGrip universal cradle is genius. Easy in and out, super strong grip, and will never mark your device. All I use anymore.
http://youtu.be/kUh08JQNFv4
Brodit mounts. They're pricey but once you try them you'll never go back:
http://www.proclipusa.com/default.a...e_holder=false&p_pageid=1&dtype=&leftorright=
The Mountek looks really tidy with the Nexus 4 and is very well built. I'd give up on your concerns for a dedicated mount.