Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.
Just one more bump and if nobody has any idea well then i give up..
dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks
i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.
I have the same probleme, do you have any idea Please ?
JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.
same problem after a backup restore. Hardware error radio 1.56.70.11
Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it
Related
i have upgraded my XDA2 to WM2003SE. after a few months of perfect running condition under the new ROM, my BT all of a sudden died on me. when i try to enable BT, the same error message keeps on popping up... "There is no bluetooth hardware installed on this device."
i have tried multiple hard and soft resets but to no avail. what could be the problem? hope you guys can help me out.
TIA
ssaloon said:
i have upgraded my XDA2 to WM2003SE. after a few months of perfect running condition under the new ROM, my BT all of a sudden died on me. when i try to enable BT, the same error message keeps on popping up... "There is no bluetooth hardware installed on this device."
i have tried multiple hard and soft resets but to no avail. what could be the problem? hope you guys can help me out.
TIA
Click to expand...
Click to collapse
Did you install some software, or tweak your registry during this time period?
Perhaps you can supply more information:
(a) ROM version, (from who DCS, ZeroExtreme, SIN)
(b) MS/Widcomm version/Toshiba BT stack or a combo
(c) Any registry tweaks and/or BT files you've replace?
If you have not done anything out of the ordinary, try upgrading your ROM again without the Radio or ExtROM package. You will get to retain your Radio and ExtROM stuff.
If all else fails, go to your local support centre to check if the BT chip is faulty.
henrylim said:
Did you install some software, or tweak your registry during this time period?
Perhaps you can supply more information:
(a) ROM version, (from who DCS, ZeroExtreme, SIN)
(b) MS/Widcomm version/Toshiba BT stack or a combo
(c) Any registry tweaks and/or BT files you've replace?
If you have not done anything out of the ordinary, try upgrading your ROM again without the Radio or ExtROM package. You will get to retain your Radio and ExtROM stuff.
If all else fails, go to your local support centre to check if the BT chip is faulty.
Click to expand...
Click to collapse
nope, haven't installed any BT or registry tweaks.
the ROM version i installed was ZeroExtreme's. i'll try upgrading my ROM again when i get home tonight. hope it's not the hardware that's at fault.
thanks, man
Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....
might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!
jup.both things NOT HELPED
looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San
can you please write me a procedure?
You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725
i am trying to download files but i get permission denied all the time
You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb
I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?
Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S
Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!
1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
i found out some bluetooth problem after i flash my rom , i can recieved file from others device by bluetooth but can't send out file or picture by bluetooth,when go to bluetooth connection even others device is on but it still show disconnected,whne try to beam the file it will stay on seaching only no device will show.hop there is anyone to help me on this problem thanks!
Had the same problem once after flashing a rom, did a hard reset, flashed radio versions, but no result. Then i found a good BT utility here, called PersianBlue, it solved my problem, and it has more options then normal Windows BT utility.
You could give it a try:
my bluetooth wont turn on, says somthing about BTmanager not a valid aplication! any ideas how to rectify this issue?
Bump, this is stressing me out now!?
what rom version are you using? have you altered any reg settings or installed tweaking applications? btmanager not a valid win32 app may be caused by a hardware error as well.
what i'd try first = soft reset + check again > hard reset + check again > remove and add bt devices again + check again.
mole83 said:
my bluetooth wont turn on, says somthing about BTmanager not a valid aplication! any ideas how to rectify this issue?
Click to expand...
Click to collapse
did you install tom tom?
Hi,
Yes I have installed TomTom and now have this issue.
Do you know a fix?
Of course, I would like to keep TomTom
** P.S ** Appologies for digging up an old thread.
Mike
With the help of Google, I found the fix, please see below:
This Fix also works on the HTC HD2. (HTC Leo)
Although I could not delete \Windows\BtCoreIf.dll
but it did rename and fixed all the issues.
Errors that show up are after installing TOM TOM 7.
On Restart.
BTTrayCE is not a valid Pocket PC application
When trying to open Bluetooth
BTManager is not a valid Pocket PC application
and for info on HTC HD2, GPS PORT is COM 4.
Click to expand...
Click to collapse