Related
Hi,
I couldn't find any other thread about this problem:
My O2 Xda neo has stopped detecting Wifi networks.
I activate Wifi in the comm manager, Wifi appears to work (the antenna icon appears, but not "radiating"), but never searches for wifi networks, only asks me to add a new one, whereas before a few weeks or so, it would display all the Wifi's found in my vicinity.
Anyone have any ideas?
Thanks,
n
i have the same problem...and couldn't find a solution for about 6 months on now....=(
Have you try on setting\connectons\wifi ? it has the list of avaiable wifi access points that were detected when you turn on wifi on comm manager.
(with the wm5 rom on my prophet, it auto connect to wifi access point whenever i turn on wifi on comm manager but when i use wm6 rom, I have to go to setting\connectons\wifi and connect to avaiable access point manually )
maquan said:
Have you try on setting\connectons\wifi ? it has the list of avaiable wifi access points that were detected when you turn on wifi on comm manager.
(with the wm5 rom on my prophet, it auto connect to wifi access point whenever i turn on wifi on comm manager but when i use wm6 rom, I have to go to setting\connectons\wifi and connect to avaiable access point manually )
Click to expand...
Click to collapse
well....is good that u can manually connect....my one...i already on my WIFI from the comm manager there....but when i go to setting/connection/WIFI.....
i still cant find any visible connecting point for me....but my house is wifi hot spot....i sit beside the router still cant detect anything....><"
haiz....><"
are u on Active sync or not? I remember that the Active sync on winXP have an option to disable wifi whenever you connect to pc (I use window mobile device center on Vista and don't remember exactly ).
sometime, when i can't connect to wifi, I check on setting connection and I found that the wifi icon with the name "WIFI" is replace with the same icon but with name "network card". I just soft reset and everything was fine then
Try Hard Resetting the Device
I have the same problem here with prophet g4 and wm6.1 konrad (tryed shadow's too).
Autosearch of wifi networks is missing.
maybe this our solution:
but how to proceed??
I wonder if this is hardware rather than software. Try an official WM5 (AKU2.2) ROM from the ftp/wiki and see if you still get this problem.
Can a hardware issue be fixed???
Hey all I am having the same problem on a Wizard wifi LED is blinking antena icon is up but no detection of APs I am ready to throw this thing. Some one hook a soln up please!!!
Xda-viewers,
yesterday i tried to put on my WiFi, but it didn't work anymore
I have my HD2 for about 1month, very happy with the phone,
and this is the first mayor malfunction
When i press WiFi ON in the comm-manager it shows it's loading,
and then nothing, doesn't go ON,
turned the phone off-on, soft reset.. nothing..
anyone else had this glitch?
hard reset or other solution?
It always worked, untill yesterday
If I were you I would go for a full backup with SPB, and then restore (maybe excluding everything regarding the wifi) after a hard reset
I would try doing hard reset.
However, I had the same problem with my old Fujitsu Siemens Pocket Loox N560 and they had to exchange mainboard.
Do you have it charging? I can't seem to connect to any Wifi networks when I have the phone plugged in. Once i disconnect it, it works fine.
If you are connecting it using USB, make sure WMDC / ActiveSync is set to allowing your phone wireless connections while connected to your PC!
???
phone is fully charged
not connected to PC or anything
not working, going to try some things
anyone goto suggestions except hard reset?
else i hard reset tommorow,
thankz
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
skr_xd said:
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
Click to expand...
Click to collapse
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
timodc said:
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
Click to expand...
Click to collapse
I've got exactly the same problem - have only noticed it today.
If I go into wireless network config and select my network there and click connect, it takes ages before it says "connected" and then immediately changes to "not connected". I've obviously checked and rechecked my settings. It simply will not connect any more.
i also can't remember installing an update which would cause this probleme..
Connected to PC
When connected to PC, in the comm manager, the WLAN is dissabled, can't even push it, maybe something went wrong with disconnecting and this is the reason why my WiFi is not working - going on?
Anyone?
I'm not at home, so can't do anything with mine at the moment, but out of curiosity, did you use then Wifi N option in BsB Tweaks? That's the only thing Wifi related that I can think of touching recently.
Tried it
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
timodc said:
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
Click to expand...
Click to collapse
I really hope it doesn't need a hard reset. I'm not gonna be happy if I have to do that AGAIN!
I'm gonna keep searching, in the hope of finding a solution.
Out of curiosity, do you ever use the Wifi router app?
WM-Wifirouter
I tried to use the Wlan-Router with Comm manager,
didn't work that well,
installed app I had on my P3600: WM-Wifirouter,
this worked like a charm,
Timo
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Sensational johncmolyneux!!!
I had this problem too - it was doing my head in, but now seems like an obvious conflict. Thanks for finding the solution.
Now all I need to do is solve my BT Voice Commander problem (reported in many other threads) and the HD2 will have the same functionality as the Hermes it has replaced ;-)
Cheers,
Lordbowl
You still haven't hard reset?! I am doing hard reset every 6days because of mod/theme and other crap testing
Backups with resco/pim/office2007 entreprise on windows 7 beta do the trick to have phone working in 15 minuts.
johncmolyneux said:
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Click to expand...
Click to collapse
-When I try to connect the WLAN-Router with the Comm Manager, it keeps on loading and nothing happens.
-When I try the WM-Wifi-Router app which I used on my P3600, it says not abble to connect WLAN
-All my settings are server-assigned-IP-address
Still not able to put on my WLAN,
Timo
Why is my WiFi connection option grayed out? Now I can not activate my WiFi. What caused this and how do I fix this? Thanks for any help you guys can give me on this problem.
bahardman.
you you have the hd2 pluged in to your pc ?
this will stop wifi from working.
Duh!!! that was the problem, thanks Grantzxr.
Ok I have gotten my WiFi connection solved, but now I can not connect to the internet through my WiFi.
bahardman said:
Ok I have gotten my WiFi connection solved, but now I can not connect to the internet through my WiFi.
Click to expand...
Click to collapse
I have been having exactly the same problem! Even when the HD2 is not connected to my laptop the Wi-Fi stops being greyed out but does not switch on. The only way is going to Settings - Menu - All Settings - Connections - Wi-Fi and then tick the Turn on Wi-Fi. Wait around a minute until it connects... sometimes
I have the original T-Mobile 1.43 Rom (got my mobile only last week) and on the first two days it worked fine when connecting to my home Wi-Fi. But suddenly it just started doing its own thing. Most of the time I have the Wi-Fi icon showing but if I try and go online I just get an error message asking me to "check my data connection and try again".
The only modification I made was installing some of the wonderfull .cabs tested and tried on the HD2 by tboy2000 and by smaberg. Amazingly, the only one that did not work properly was the Touch X reset and wifi.cab; the Reset was OK but the Wi-Fi Toggle didn't respond. I am going to try and reinstall.
aiwama, let me know if you got it solved, and I will do the same for you.
bahardman said:
aiwama, let me know if you got it solved, and I will do the same for you.
Click to expand...
Click to collapse
Well, reinstalled the .cab, but I think that was not the problem. When I press the Wi-Fi Toggle and wait for around 50 to 60 seconds it actually connects - for a while - and then freezes.
If I press the Wi-Fi Toggle again it disconnects from the Internet. I actually went back every single time to check Settings (Wi-Fi box would respond accordingly) and All Settings - Connections - Wi-Fi and (un)ticked Turn on Wi-Fi box. So, the Wi-Fi Toggle works fine. But there's the freezing thing that I don't know where it comes from!
aiwama, I simply shut my phone done completely and then turned it back on after a few seconds, tried it and it worked just fine and its been working ever since. Hope it works for you also.
Hey guys
I'm a big time noob, and the HD2 is a complete marvel for me, its my first WM device and I'm learning alot thats for sure. If there is an obvious solution, apologies in advance
I've been looking around the forums and googling for answers, but still unsure about the data connection and wifi settings in the HD2, and have spent the last few days checking the connection status/settings. Sometimes I find that the WiFi and/or Data Connection ON/OFF toggle section is greyed out in Settings, no idea why as I haven't been able to find a real reason. Could anyone please explain why this may be the case?
Ideally I'd like the WiFi to be the preferred internet access mode, but I'm not sure what my phone is using when I access online content. I can see the wireless is connected, but how can I be sure its definitely using it? I can check the notifications that I'm connected, but I'm also seeing a connection to "Contract Internet" which is normally on H with full bars.
On my previous phone a Nokia N95 8gb (nothing compared to HD2 bar the camera ) whenever I wanted to go online, I had it set to "ask" what connection to use, e.g. I had a list of connections such as Vodadafone Contract (3G/GPRS) or from a list of my defined WiFi connections.
Is there something similar somewhere in the HD2 settings that would "ask" what kind of connection to use? It would be great if someone could let me know.
Sorry to be a pest, but anyone?
Hi there. I'm not an expert myself and HD2 is my first Windows Mobile device as well. I'll try and help, because I spent some time looking for answer on that particular subject. Let's go through this point by point.
(1) You have to understand the notification icons that appear on the topbar. Download the official user manual here and look for pages 39-40. These notifications are realtime, thus more precise than the Comm Manager.
(2) Let's be clear: the word "data connections" that appear in the Comm Manager only refer to the internet connections using 2G (GPRS or EDGE) or 3G (UMTS or HPSDA), not Wifi. So it won't toggle on, even when your wifi connection is up and running.
(3) A lot applications use your internet connection (Data or Wifi), even when the phone is in sleep mode (weather updates, stocks updates etc).
(4) About the following question: I'm not sure what my phone is using when I access online content. I'll tell you the way it works on my phone. Still, you'll need aswers of other people as well. You have to consider different situations.
- If no internet connection is on (no wifi, no data) and an application need to access internet (ex: Eutomatic updates or Opera browser), then the phone will open a data connection (2G or 3G). If it doesn't succeed, you'll get an error message.
- If wifi is already on and connected, but data connection is off, the applications will use the wifi connection. Unlike data connection, the applications are not able to "force wifi connection" if it's not already connected... I don't know if there is a setting or a tweak to change this.
(5) Unfortunately, I already experienced some application that "force" the opening of data connections, even with wifi on and connected. That's why I disable every automatic updates. I only do manual updates... and it "obeys", meaning that updates use the wifi when I'm connected, and force data connection when wifi is not available. I tried some complex (freewares) softwares like WMLongLife (found here) because I wanted the data connection to disconnect automatically after an updates (manual or automatic), but they were not very handy. The latest I tried gave me the best results. It's called Bandswitch 0.3 (found here). It works great in doing just that: automatic data disconnection after idle delay you choose.
(6) Is there something similar somewhere in the HD2 settings that would "ask" what kind of connection to use? I'm not absolety sure, but you could try to reach this settings. Follow this path: Windows icon -> Start menu -> Settings -> Connections -> Connections (yes, once again) -> Go to the tab called "Advanced" -> Click on the button "select networks". Here you can find what program which network programs must automaticaly use. You'll be able to see the 2G/3G network, but I'm not sure what you should choose to enable WIFI connection... Tell me if you find!
That's it folk. Cheers.
Sorry for a short answer, but Wifi will always be grayed out when your hooked up to your pc, I didnt notice it at first either so dont be embaressed
(subscribed to the thread because I think something that would let you pick your connection type would be ace)
[★] said:
Sorry for a short answer, but Wifi will always be grayed out when your hooked up to your pc, I didnt notice it at first either so dont be embaressed
Click to expand...
Click to collapse
I also noticed this, but yesterday I found an option in Activesync windows mobile device centre on my PC by accident. It says "disable data connection on phone when connected to PC"
If you untick this box you can connect to wifi and GPRS/HSDPA all whilst still connected to the PC through usb!
Elmo-85 said:
I also noticed this, but yesterday I found an option in Activesync windows mobile device centre on my PC by accident. It says "disable data connection on phone when connected to PC"
If you untick this box you can connect to wifi and GPRS/HSDPA all whilst still connected to the PC through usb!
Click to expand...
Click to collapse
I guess you'd wanna do that only if your PC is not connected already to the internet... which is rare...
Because your device is automatically connected to the network your laptop/pc is currently connected to.
lovanova said:
I guess you'd wanna do that only if your PC is not connected already to the internet... which is rare...
Because your device is automatically connected to the network your laptop/pc is currently connected to.
Click to expand...
Click to collapse
Yes it's strange isnt it. I cant think why it is necessary really to change this option
I just thought I would let you know incase you wondered !!
Thanks rzasharp and [★], things are clearer now.
lovanova said:
I guess you'd wanna do that only if your PC is not connected already to the internet... which is rare...
Because your device is automatically connected to the network your laptop/pc is currently connected to.
Click to expand...
Click to collapse
Elmo-85 said:
Yes it's strange isnt it. I cant think why it is necessary really to change this option
I just thought I would let you know incase you wondered !!
Click to expand...
Click to collapse
If your computer uses a proxy server to connect to the internet, your phone doesn't assume the same identity as your PC. At work I can't use the PCs internet connection on my phone when I connect via ActiveSync, but my phone charges and I can browse it in file explorer.
That's one reason why you'd want to do it
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>