Database Users

CID unlock problem

Please how unlock the CID .... upgrade (downgrade) is no funkcion.
I have 1.8. WWE version HTC and I like dopod ROM...
thank you very much

check:
http://www.imei-check.co.uk

I know a way to let Hermes to get SUPERCID by using HTC_Hermes_SIM_Unlock_v2a,can I use this software to unlock the Herald CID?Thanks!!!

ywl3k said:
I know a way to let Hermes to get SUPERCID by using HTC_Hermes_SIM_Unlock_v2a,can I use this software to unlock the Herald CID?Thanks!!!
Click to expand...
Click to collapse
it can't!!!!!!

wlinsong said:
it can't!!!!!!
Click to expand...
Click to collapse
100% positive????

wlinsong said:
it can't!!!!!!
Click to expand...
Click to collapse
So,How Can I do that?I want to get one,and flashed the USA rom.Only can supercid can do it?!

ID64 said:
100% positive????
Click to expand...
Click to collapse
Now we cannot do it.

Hi Can anybody please provide me with some information on howto unlock Herald with http://www.imei-check.co.uk/... ?
I have bricked my Herald, can only get into Bootloader - Is it possible to do the unlock when no System is installed ?
THX !

Sorry but with iemei-check you need to have OS running, and have to have an ActiveSync connection, READ what is said on the site itself, you could have found the awnser yourself

White Bootloader Screen

My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?

Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom

NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..

hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse

NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks

This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse

NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks

If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse

NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help

I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse

NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal

If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse

NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.

hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse

NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!

Re: Bad Flash brick Pharos!

Re: Bad Flash brick Pharos!
Hi,
Sorry for my Bad English
I bricked my Pharos!
I Have a problem!
I Made my Own Pharos rom with "jose_sonseca" Totorial!
The Tutorial is bad, now start my HTC Pharos only in the "smart mobility" screen.
No Rom ( My own createt rom ) not Loaded!
how i can enter the bootloader and reflash the bad rom?
The rom gang up in the "smart mobility" screen!
No Active Sync...
Edit: SPL: 1.11Mobiz!
The phone is only one day old... ;(
Please Help...
Thx
How i can enter the Bootloader mode?
How i can reflash my Pharos?!
Please help..
Lou
O.k!
The Answear is " Soft reset and Camera!"!
I Reflash it now!

did it work the second time?

avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
If not, upload your part02.raw, and I will try to compile it.

avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
Works great now...
jose_sonseca said:
If not, upload your part02.raw, and I will try to compile it.
Click to expand...
Click to collapse
Can you please Upload a German Rom with original Bootsplash?
Many Thx

LouTheDuke said:
Can you please Upload a German Rom with original Bootsplash?
Click to expand...
Click to collapse
I don't have it, but it's posted here -> http://forum.xda-developers.com/showthread.php?t=420216
For the original bootsplash, I don't think that german rom have it, so apply my original bootsplash, I've posted it here -> http://forum.xda-developers.com/showthread.php?t=412324

Does flashing change anything about my vodafone contract/package?

noob here...
Haven't got a response yet.
I am thinking about flashing my HD2, but I am little afraid. I have superflat rate, unlimited emails and free calls in 3 different networks and stuff like that.
Will I loose something else except the warranty?
kind regards
vito

Im no expert, i wouldnt think it would!! You could always revert back to stock so it wouldnt affect your warranty.
Maybe some1 else could shed some light on this?

contract is on your sim card... you can do whatever u want with phone...

Lake292 said:
contract is on your sim card... you can do whatever u want with phone...
Click to expand...
Click to collapse
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?

vitolamanna said:
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?
Click to expand...
Click to collapse
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using

cd78 said:
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using
Click to expand...
Click to collapse
how different is ur ROM from the default one?

vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
How different is chalk from cheese LOL

vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me

cd78 said:
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me
Click to expand...
Click to collapse
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...

1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?

vitolamanna said:
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...
Click to expand...
Click to collapse
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.

cd78 said:
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?
Click to expand...
Click to collapse
yeah..I did HSPL2..worked fine

ClydeB1 said:
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.
Click to expand...
Click to collapse
WAIT...your Rom is only for T-mobile phones???

vitolamanna said:
WAIT...your Rom is only for T-mobile phones???
Click to expand...
Click to collapse
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile

ClydeB1 said:
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile
Click to expand...
Click to collapse
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??

vitolamanna said:
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??
Click to expand...
Click to collapse
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.

ClydeB1 said:
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.
Click to expand...
Click to collapse
thank you so much!

vitolamanna said:
thank you so much!
Click to expand...
Click to collapse
Pleasure m8, enjoy your new phone.

ClydeB1 said:
Pleasure m8, enjoy your new phone.
Click to expand...
Click to collapse
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?

vitolamanna said:
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?
Click to expand...
Click to collapse
It'll now be an English phone . You can change the Sense language if you wish.

[Q] Help mw pls!!!

I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)

gotji said:
I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)
Click to expand...
Click to collapse
you need downgrade to Olipro's Hard-SPL 1.20 or Olipro's Hard-SPL 1.30

Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???

gotji said:
Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???
Click to expand...
Click to collapse
to fix it, you can look post at http://forum.xda-developers.com/showpost.php?p=4353623&postcount=1

This link was expire. Do you have any link??

gotji said:
This link was expire. Do you have any link??
Click to expand...
Click to collapse
I am very sad... for not knowing the other links (mirrors), we suggest you try making your own NBH file to recover stuck HardSPL 1.20 by following the instructions given

Thx. I will try it