[REQ] HP iPAQ hw6915 (0409) english .mui files needed !!! - Sable

Hi to all,
No english ROM for hw6915 exist, but somebody must have hw6915 with english ROM installed. Please somebody copy all *.mui files from windows directory and upload them to the forum and we will try copy this .mui files
to our windows directory and see what we will get. We will get true english ROM if i am not wrong. Please somebody upload english .mui files.
Try to copy files with PPC Total commander, i think this will work !
Best regards,
Drahtman

hw6915_only_all_files
File: dump_hw6915.rar
DownloadLink: http://rapidshare.com/files/51750586/dump_hw6915.rar this is all files from hw6915 english 1.21UK

hw6915
DownloadLink: http://rapidshare.com/files/51271310/aWizard_hw6915_OS.rar
Use these tools at your own risk! They may make your device completely unusable! Always make an SD-card backup of your ROM and Extrom!
My device not work after awizard. Please view readme!
customerid=00000000 uniqueid= 00 00 00 00 5a 62 01 02 1b 2c 02 49 12 06 06 ae
CopyFileToTFFS(hw6915-OS.nba:0, 0, 03900000)
ERROR: ITWriteDisk - An existing connection was forcibly closed by the remote host.
Use these tools at your own risk.....!

Coredll.dll.0409.mui file needed !
Hi ,
Thanks spgi, but there is no coredll.dll.0409.mui file ? Can you copy out of your rom this file ? This is the most important file which contain english version of windows core. Please try to copy this file for us.
Best regards,
Drahtman

This files Ok?
DownloadLink: http://rapidshare.com/files/51750586/dump_hw6915.rar

Hi,
The files are OK, but i dont know how to trick the German windows to take this files. I rename those and copy to windows folder then do soft reset and nothing is realy hapend. I am so tired of trying found the solution of ENG ROM. I hope someone wil find ENG ROM for hw6915.
So folks where is that ENG rom. Must be somewhere !
Best Regards,
Drahtman

spgi said:
DownloadLink: http://rapidshare.com/files/51271310/aWizard_hw6915_OS.rar
Use these tools at your own risk! They may make your device completely unusable! Always make an SD-card backup of your ROM and Extrom!
My device not work after awizard. Please view readme!
Click to expand...
Click to collapse
How can I make SD-card backum of 6900 series ROM?
thnx

drahtman said:
The files are OK, but i dont know how to trick the German windows to take this files. I rename those and copy to windows folder then do soft reset and nothing is realy hapend. I am so tired of trying found the solution of ENG ROM. I hope someone wil find ENG ROM for hw6915.
So folks where is that ENG rom. Must be somewhere !
Best Regards,
Drahtman
Click to expand...
Click to collapse
FIRST THING IS TO FULY BACKUP YOUR DEVICE USING AGOOD BACKUP SOFTWARE AND TO KNOW THIS MAY BE ONLY ONE WAY!! THEN TRY TO USE THIS
http://www.resco.net/pocketpc/explorer/
TO FORCE THE REPLACEMENT OF ALL FILES AND IN A "SHOW ALL FILES" MODE ROM INCLUDED GOOD LUCK &YOU NEED IT YOU CAN ALSO INJOY THE DEVICE "AS IS"
BUT YOU DO WHAT FIILES BAST GOOD LUCK

If you want to replace the files and this maybe risky...
in the Awizard thing once installed in your pc you'll find a in the "BIN" folder a CAB file named unlock or something of sorts.
copy this file to the device, run it, after it with Resco File explorer (follow Erezyad method) you'll see a completely new folder named "2" there is a replica of the root folder of your device...
i have tried adding files to one or the other and while i cannot modify some files on the root (inside windows folder i.example) i can write or erase anything i want form the contents of the "2" folder and even better it doesnt mirrors the root neithe rthe root mirrors the 2...
so my guess is that on hard reset the contents of 2 are copied to \root and.
i'm too lazy to hard reset my device and i ma happy with my french language .. however you could try for example.
from folder 2 erase all the sample pictures that comes with the OS... hard reset and see if you get them... if you dont i am right and you can try and write the english .mui files in the folder 2 and hard reset... or you can end up briking your device... but it is worth a try isnt it? you look stuck anyway
let me know
cheers
N
PS: You can easily copy the contents of 2 folder to your pc before messing with it (no sharing violation or anything (that could act as a backup )

I Have A IPAQ hw6955 And it is in French Also, I Would LIke To know If There Is A Way To Turn This Into English, I Have A Friend That Has the Exact Same Phone But His Is In English Is There Anyway I Could Use His To Turn Mine Into English?

That Dude said:
I Have A IPAQ hw6955 And it is in French Also, I Would LIke To know If There Is A Way To Turn This Into English, I Have A Friend That Has the Exact Same Phone But His Is In English Is There Anyway I Could Use His To Turn Mine Into English?
Click to expand...
Click to collapse
Could you dump your ROM? I'm looking for a french one
I tried to make an english version of CEOS.nbf based on spgi dump.
Now I'm looking for a crazy volunteer to be the first one to test it (it won't probably pass the RUU tests, but it could work. I didn't modified anything, just used modified prepare_imgfs/buildimgfs/make_imgfs). It may also crash the device....
Anyone who updates his device (with official ROM) should use HDD USB Monitor to log RUU full process.

b0ris747 said:
Could you dump your ROM? I'm looking for a french one
I tried to make an english version of CEOS.nbf based on spgi dump.
Now I'm looking for a crazy volunteer to be the first one to test it (it won't probably pass the RUU tests, but it could work. I didn't modified anything, just used modified prepare_imgfs/buildimgfs/make_imgfs). It may also crash the device....
Anyone who updates his device (with official ROM) should use HDD USB Monitor to log RUU full process.
Click to expand...
Click to collapse
I Don't Know How To Dumb a ROM, Im Just Really In Need Of Turning Mine To English. lol

HW 6915 Rom
Hi,
I have actually a HW6915 with a sound problem and which is sim-locked. It is a French one. It will be exchanged next week for an English version. As I prefer to have a French one I was wondering on how to copy the rom from the first one to put it in the second one. I am not sure if it is possible but before sending back the French one I prefer to make a copy of the Rom.
What do I need and how to do this ?
Regards,
Chris

Zdravej,nogo ne sam najasno sas anglijskijat i zatova po-dobre pitam.Imam 6915 vav nemsak versija i iskam da ja prehvarlja na anglijska.Drapnah njakakav rom od foruma no mi pise pri instalacijata ce ne e kompatibilen rom sas mojat.Neznaja kakvo da napravja.Molja HELP... Mersi Niagol

Please reply me in English or French
I do not understand the above message.

Hi Niagol !
Please write down your text in english. So far there is no english rom for hw6915 so please be patient. If someone finds the english one i belive he will let us know. The only working rom on this forim is French ROM. I did not try it out, but someone does and this rom work i belive.
Best regards,
Drahtman

Hw6915 Rom
As previoulsly said I have 2 HW6915. One in English and the other one in French. If you explain me how to get the rom out of them, I will make a copy available.
Regards,
Chris

b0ris747 said:
Could you dump your ROM? I'm looking for a french one
I tried to make an english version of CEOS.nbf based on spgi dump.
Now I'm looking for a crazy volunteer to be the first one to test it (it won't probably pass the RUU tests, but it could work. I didn't modified anything, just used modified prepare_imgfs/buildimgfs/make_imgfs). It may also crash the device....
Anyone who updates his device (with official ROM) should use HDD USB Monitor to log RUU full process.
Click to expand...
Click to collapse
WELL, I HAVE THE DEVICE READY FOR TESTING, BUT I DON'T HAVE A CEOS.NBF IN ENGLISH... I AM WILLING TO TRY THAT ON MY 6915... I ALSO HAVE A METHOD TO BYPASS RUU TESTS (HEXEDITING THE HEADER OF THE NBF AND UPDATE VIA SABLE RUU UTILITY FOR FRENCH ORANGE UPDATE), IN FACT I'VE CHANGED MY FRENCH OS INTO GERMAN , SPANISH, SWEDISH OR DANNISH, ALSO ITALIAN... I JUST DON'T HAVE ENGLISH ROM FOR TEST...JUST GIVE ME THE CEOS.NBF IN ENGLISH AND I'LL POST THE WHOLE METHODE FOR UPDATE LANGUAGE... THANX

Hallo, t it occlusion in English.Shall I IPAQ 6915 in German version.Rad would it play back to the English.Found be on Internet cafe various ROM but every time me it wrote as though this ROM isn't compatible. Zrejme is concerned various language gardens.You can me help and advise st. to what about it be to make?? Thank you.Niagol

My CEOS.nbf wasn't working... (or sable_RUU...)
I ALSO HAVE A METHOD TO BYPASS RUU TESTS
Click to expand...
Click to collapse
What's your RUU version? is it official sable_RUU or a modified one?
I made this one using a dump found here on the forums, and using the prepare_imgfs tools I modified. I'm waiting to get tadzio sources to make imgfs_toolsV2 for hw69xx devices (better imgfs size handling)...
I'll let you know when more informations will be available, or when imgfs_toolsV2 will be ready for hw69xx.
Please describe your method to pass RUU tests (IDA breakpoints, special RUU, RUU from another device...)

Related

Traditional Chinese Rom for Magician for download

I am trying to upload it to xda developer's server, however it is very slow and disconnect me all the time. I hope someone can provide me a permanent space for the rom?
The upgrade method is exactly same as t-mobile mda compact german to english. I did it on my xda ii mini already.
Can you send it to me ...i crazy want it
i m using o2 mini and i want to change my rom to Tra Chinese, can you help me to slove my problem? my icq is 130941707. Thank you
There are some links for the rom now!
Get it asap, I don't know how long it will avalible.
http://xppc2.no-ip.com/dopod-1.03_CHT.rar
ftp://xdamini:[email protected]/
It's avalible on ftp://xda:[email protected] too.
thanks a lot!
Thank for share Rom! But...how can i flash ?
I hve already downlaod the Chinese Rom for Mini o2 ...but can anyone teach me how to flash to Mini o2?? i have use Zip to open it...it was a (Bin) Files...how can i make ?? Thank a lot!!!
that is what i want to ask!
can BIN data be used like the english rom´s nb data!
Can it place to XDA II ?
Can the traditional Chinese rom for mini XdaII place to XdaII ? Will it stable ? Anyone try it ?
Thank you
The traditional Chinese ROM is no longer found in the above servers. Some selfish people must have deleted it after they got the ROM, and perhaps, they use it for their own business and ask money !!!
Can someone repost the ROM and stop these selfish people?
URL for uploading dopod-103cht.bin
Please provide an URL for me to upload the traditional chinese rom. Furthermore, I don't know how to refresh this rom to my XdaII mini. Can someone teach me ?
Frankie
Try post it here...
ftp://xda:[email protected]
Oh Come On,..... I really need the Trad.Chinese Rom
I cant get into the FTP
The file is uploading to forum.xda-developers.com/Magician/Tradition Chinese
But it is a bin file after extract. I don't know how to refresh it to my rom. Anyone can help me ?
try ntrw write dopod-103cht.bin E:
*E: is your SD reader/writer then i should write to SD card
I try it on my Blue Angel is say the Rom format is Magician
so i guess it will do fine
Just lemme know how you getting on, if work for you i will replace my blue angel with Magician
Tried but stalled. It said Sections=1 Not allow update !
How to solve????
no idea as i do not had a Magician myself
try found a way to extract .bin into .nb1 or nk.nbf...etc
The upgrade method is exactly same as t-mobile MDA compact german to english. But remember to replace the first 416 bytes of dopod-1.03_CHT.bin from your original rom by Hex editor. :lol:
now under the same link u can download the simple chinese rom, 1.30chs
The file size of the traditional rom is only 119M. I followed exact procedures mentioned but still get the same error. I wonder if the Chinese Rom is the corect/full version...
It is a full version including radio rom and ext_rom. I have no problem to refresh my rom to traditional chinese by replacing the first 416 bytes of dopod rom. :?:
gd5gd said:
It is a full version including radio rom and ext_rom. I have no problem to refresh my rom to traditional chinese by replacing the first 416 bytes of dopod rom. :?:
Click to expand...
Click to collapse
how to replace the first 416bytes of dopod rom?

Need help to convert raw files into NBH to trinity

Hi all,
I dumped my PTG v1.15.410.2 ROM from HTC P3600 (trinity). I dumped the 4 internal parts and also the ext-flash.
Now I need to convert it to NBH, so that could actually create a RUU PTG ROM, which is highly required on our country, since no one seems to have the RUU PTG ROM. And some of us wanna try the GPS enabled ROM, but we wanted to have the RUU PTG ROM so that could return to normal state for whatever reason.
Can someone please help me convert the dumped raw files into a NBH file?
I have them hosted in a single rar file here:
http://www.drugstore.gsmhosting.net/Support/HTC/P3600/
Username : free
Password : free
Much appreciated if anyone could help the Portuguese community on this
Thanks
I hope that someone help us
Yeah!
Great!
Let's see if someone gives us a hand!
yes i actually need that too
Yep... all portuguese users whilling to change to the wwe GPS enabled rom, are waiting to have a RUU PTG ROM for ensurance or turn back
Ok, seems that converting Raw files into a NBH for this device is hard.
Maybe we should take easier step and extract the raw files contents and maybe later, "cook" a ROM from there.
However "cooking" roms, is something I don´t know nothing about...
need that too

herald dead

i tied to flash my herald os original italian with this method with UK OS
http://forum.xda-developers.com/showthread.php?t=290382
but my device dont wont to boot it stay blocked at
IPL 1.08.001
SPL 1.08.001
GSM 02.71.90
OS 1.8.0.0
please help me
can someone upload a shiped rom please italian if posible cause original os was italian
please help
I thought I did not unlock CID before flashing your Herald (it is HTC or Dopod or ???). Until now the best way to rescue it is bringing your PPC to the service.
But before doing this you can do some following action:
- Remove the battery for about 20 min and put it again.
- Hard reset.
its a htc
i will try battery solution and feed back
thanks
Got the same problem
I have the same probleme. is there any solution????????????? please post. mine herald doesn't start up. it get stuck when starting op.
Herald is no dead as the bootloader is still there.U need to flash the original OS by putting Herald into bootloader mode.It will b alive again.
yes but i didn't found the original rom anywere italian rom
and my device still bloked
please can someone upload italian os rom please
hey did you manage? cuz i have the same problem, maybe you can help me out
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
chrispazz said:
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
Click to expand...
Click to collapse
If italian is not absolutely necessary find an original English rom is simple...
or not?
johnny88 said:
If italian is not absolutely necessary find an original English rom is simple...
or not?
Click to expand...
Click to collapse
NOT, devices mostly get bricked because they are not CID unlocked. So the phone will only allow to flash the ORIGINAL language and ROM version etc.. good luck ya'll, by the way my Herald is dead too, so join the club
there is not a way to edit the image so to keep CID control away?
Is it possible to uncid the phone via USB bootloader mode?
Thanks
Christian
As far as I know (or what the XDA-dev forum can do) there is no utility for Removing and/or replacing the CID lock. There is imei-check.co.uk, but some people are having problems with that prog, and it can only be used when your device has OS running and ActiveSymc is connected, sorry pal
Hi,
I have the same problem than you,
but i have another Herald with the same rom as mine,
Is there any way for me to dump the rom from the first herald
and put it in the second?
Thx for your answers.
Herc.
hi,
I may be found a way to unbrick the herald
but i need to know the right command line to do it
please help.
cf: http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=151&PN=1
where i found the way to unbrick a pda using usb
Bye
Herc.
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Portuguese ROM of wm5 PLEASE!!
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
eagler said:
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
Click to expand...
Click to collapse
We can't just upload a ROM, it is very very hard to find! Try to search for yourself!It took me 3 google and torrent days to find a german ROM (accidentally)
when i was searching for the Dutch ROM. So search search search
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
Just for the info: i tried the original nbh from the german RUU to flash my terra from SD card. But no success. Still vender error
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
The Dutchman said:
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
Click to expand...
Click to collapse
Yes - But i hoped i could flash mine with the official RUU_sighned.nbh. BUT no chance.
lol

[REQ] HP iPAQ 6915 english rom needed

please, can someone give me english rom for hp ipaq 6915? my device has next settings:
system operativ 5.1.195 built 14957.2.3.1
livello di revisione del prodotto 1.0
rom 06/22/06
rom 1.25.00. ITA
versione rom estesa N/A
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
and if you'll give me the rom, please please give me the instructions too how to install it...thank you very much
HP hw6915 english rom needed
Please, can someone give me english rom for hp ipaq 6915 too?
My device has next settings:
rom 06/21/06
rom 1.24.00. FRA
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
And if you'll give me the rom, please please give me the instructions too how to install it...
Thank you very much
[email protected]
ive got :
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
English ROM for hw6915
00SparX00 said:
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
Click to expand...
Click to collapse
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
That's it for the "setup" )
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
It will show you a tiny red progress bar at the very bottom of the screen.
Once done, it will beep the default sound.
Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST LOCK THE SD CARD FIRST!!!!!
or read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats.
Tool is here:http://forum.xda-developers.com/attachment.php?attachmentid=23564&d=1119937614
Then send or publish dump.bin file to all needes
-varix-
[email protected]
I just ripped the image from my 6955 and will upload it later tonight. Just wondering if it is possible to make a WM6 rom after disecting this and applying the useful bits to one of the WM6 updates for one of the HTC devices. Anyone have any information on this?
Hp Ipqt 6915 english rom needed
Does anybody can publish English ROM for iPaq hw6915? Info about grab is located above. May be somebody has link to this image on the ftp server?
-varix-
[email protected]
I tried but when I remove the memory card (after waiting about an hour) I get an error saying "Cannot create file". The file is a 128 MB file before I remove the card, but when I remove it...it becomes a 52 KB file which is corrupted.
Did You read card in the card reader? This method starts work any time when You put SD into iPaq.
-varix-
doesnt work
i tried grab_it_128_150.exe on a mini -sd but i got a non good dump.bin,
tried also grab_it_128_minisd_468.exe but that doesn't work at all,
a simple d2s command results in a screen thats stuck in cal cheksum,
any advise????
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
I have uploaded dump.bon from english hw6519 here :
http://maloos.free.fr/dump.bin
Hoping it'll help..
I need french language by the way
varix said:
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
Click to expand...
Click to collapse
rom dump
you rom real? after winrar 161 KB? work?
So what to do with this dump now ?
how to flash the English rom onto IPAQ hw6915
How do I flash the downloaded English rom onto my IPAQ hw6915?
Answers are greatly appreciated!
so, does someone has a little tutorial how to flash on hw6915, and an english rom? please
The obstacle is that HP so far has not released any rom update for the HW69xx, thus we do not have a valid rom to test. I suppose it can be done by the same method to flash a HW65xx, but it is quite risky to flash a dumped bin file, plus if anying goes wrong, we know little to do. I used to have a Tytn and the Tytn upgrading group has contributed so much that almost makes rom upgrading a piece of cake. So maybe it is because the 6900 user base is too small thus we do not have some talent programmer like POF,etc. , who may have opted for htc native devices.
Suggestion: either wait for HP to release some rom update for us to do some experience(sooner or later), OR SET UP A FUND TO BUY A 6900 FOR SOME SMART PROGRAMMER and setup a REWARD if one get it done. I think 6900 hardware wise is a really nice machine, but HP sucks on the software side. Too much room to be improved. Let alone WM6, where is AKU3???
The link is dead, can someone please send me or add a link for a hw6915 english rom as i bought one from ebay and its french , i am hopeing to change it to english
please help
mrking
I'm in need of the 6900 rom as well so please post a link to it.
I have attached a copy of an Ipaq HW6915 English ROM. I hope this helps.
http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html

Trouble about ELF's new rom & HTC Rom Tool

As an accident, my new ELF ( or named HTC Touch in HongKong ) became brick....
Now it doesn't work anymore just can enter Tri-color mode, what i can do is to find a rom. unfortunatly, there's still no CHT ( traditional chinese) rom, all that i've found is an english rom, which won't be flashed to my HTC Touch (CID: Dopas001).
i work on the english rom for 3 days, want to find a way to build a rom for my phone. luckily i found here and found a great tool : HTC Rom Tool.
it work well on extracting, but can't rebuild back to NBH (which doesn't work with RUU), but i found ELF in device menu in the software, so i belive dark simpson had test the software on ELF, i just don't understand why the built NBH file can't work with ELF RUU....
Or, is there someone be so kind to tell me how to modify the CID in NBH file with Hex Editor? I try to do that ( replace "Dopod001" to "Dopas001" in 8 places), it doesn't work at all! i also belive there's no reason be so easy to modify NBH file.
wish you can understand my poor english, and wait for help, thanks a lot!
Do you want to find a way to unlocking the CID of HTC Touch?
Hope these can help you, but not free of charge.
http://forum.xda-developers.com/showthread.php?t=314217
http://forum.xda-developers.com/showthread.php?t=317220
lewisleung said:
Do you want to find a way to unlocking the CID of HTC Touch?
Hope these can help you, but not free of charge.
http://forum.xda-developers.com/showthread.php?t=314217
http://forum.xda-developers.com/showthread.php?t=317220
Click to expand...
Click to collapse
Thanks a lot!
now i'm still looking for a way to edit the NBH file, so i can flash it to my ELF. If this doesn't work, i can only send my phone 4 a repair...

Categories

Resources