Does anyone have, or know where I might be able to find a Rogers WM5 ROM for the TyTN? Is this even possible to find or am I SOL?
I'm looking for one also
Same here.. I would like to have one onhand just in case something goes wrong with my phone and I need to send in for repairs.
I have the WM6 Rom from HTC's official site installed right now (working perfectly by the way), and not too sure if Rogers would support a return if something went wrong.
Thanks
i just got my new rogers tytn today. I was planning on making a backup and updating ROM. if this is WM5 i will post backup file once I figure out how to do this.
That would be awesome as I am sure lots of here would appreciate a backup incase of warranty triggered
Alright... so I am going to get to this tomorrow morning - but I have no clue how to backup the existing ROM. I see a lot on how to install a NEW ROM, but nothing that I can find about the backup.
Can somebody guide me in the right direction so that I don't screw this up! LOL
Thanks
baxster said:
Alright... so I am going to get to this tomorrow morning - but I have no clue how to backup the existing ROM. I see a lot on how to install a NEW ROM, but nothing that I can find about the backup.
Can somebody guide me in the right direction so that I don't screw this up! LOL
Thanks
Click to expand...
Click to collapse
Bump......
If I am not mistaken somebody has already done this.
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
I will just have to find out how I check which one i have.
Is there somebody that can do this to the Rogers ROM?
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
I believe that will do what you need in order to flash the original ROM back onto your device.
My brain is getting sore from all of the reading about all of this. Sometimes I think life would be easier if I wasn't a "geek".
I'm probably a newb to this, but I've managed to create my own rogers ROM and have it successfully work. The only thing missing my own precompiled ROM was the Rogers splash screen and the Radio which is suppose to be 1.42...
If there is somewhere I can upload the packaged Rogers ROM please let me know and I'll quickly upload it for everyone.
the files in the Rogers rom are all RAW files. how do you load it to your device?
kintaro said:
I'm probably a newb to this, but I've managed to create my own rogers ROM and have it successfully work. The only thing missing my own precompiled ROM was the Rogers splash screen and the Radio which is suppose to be 1.42...
If there is somewhere I can upload the packaged Rogers ROM please let me know and I'll quickly upload it for everyone.
Click to expand...
Click to collapse
Please post a link....really interested in playing with this one.
Rogers Rom file WM5
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Has anyone extracted the secondary splash screen from the rogers original wm5 rom?
ziadsa said:
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Click to expand...
Click to collapse
I'd love to restore my tytn from 6.1 to wm5 (so i can enable call name display) . The link you posted is unavailable . Can you re-upload please?
Thank u
aliencurv said:
I'd love to restore my tytn from 6.1 to wm5 (so i can enable call name display) . The link you posted is unavailable . Can you re-upload please?
Thank u
Click to expand...
Click to collapse
nm . it seems to be working now ... mediafire was being wierd last night .
btw, thank u for cooking that rom
i double checked the link, all is working fine.
Enjoy it.
Thank you, thank you, thank you!
ziadsa said:
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Click to expand...
Click to collapse
ziadsa, thank you very much. I am looking at moving to a new phone, even though the TyTN has served me well, so I want to pass it on in original condition. Of course, I will be pointing the new owner to xda-developers. The next owner may want more from the phone, like I got.
Rogers splash screen
BoldFace said:
Has anyone extracted the secondary splash screen from the rogers original wm5 rom?
Click to expand...
Click to collapse
I now have the original ROMs back in place and it works beautifully, but the splash screen still shows PDAviet.
Does anyone know how to correct this and get the Rogers screen back in place? I know this forum has been quiet for a long time, so if I don't get a response here, I will try with a new thread.
Thanks in advance.
Glen
Related
does anyone have the Qtek 9100 original rom package? i think the Rom version is 1.1.7.5, Radio version is 01.13.10, and the ExtRom version is 1.1.7.105. i really need it cus im sending mine in for an exchange and i'll be in deep trouble if i can't flash it back to its original state. plz... help
KryptBoi said:
does anyone have the Qtek 9100 original rom package? i think the Rom version is 1.1.7.5, Radio version is 01.13.10, and the ExtRom version is 1.1.7.105. i really need it cus im sending mine in for an exchange and i'll be in deep trouble if i can't flash it back to its original state. plz... help
Click to expand...
Click to collapse
well i have the nba files. if u can find a way for me to get them to you, id be more than willing...
if u know how to load an nba file etc.
mine was 1.1.7.5 9/22/05 Radio 01.01.10 extrom:1.1.7.105
im very new to this kind of stuff so i don't really know how to work with nba files. i guess i'll be able to work it if u can show me.
just have a look around this forum on how to use awizard. (do a search).
ill upload the files somewhere and u should be able to download it by tomorrow or so...
its a hefty 60mb though, so be warned
i already have the awizard software, i guess i'm just waiting for ur nba file now.
ok. im uploading on rapidshare at the moment. i will pm u the link once it is done. all at ur own risk.
Cheers
pm sent.good luck, let us know how it goes
same over here
hi munzab
would you be willing to share that one with me too? i have the same situation
i'd appreciate that very much; thank you in advance!
endeler
sent. let us know how you get on as well
Original QTEK ROM 9100
Maybe I am missing the point somewhere, but the ROM you are asking for is still in the ROM section of Wizard on the XDA FTP.
Name is Qtek_9100_RUU_Prodigy_10107105_Qtek_WWE_ship
Just download and run (CID unlock not necessary since it is Qtek for Qtek)
Cheers
hrb
i guess its easier when someone asks for it..
anyway, yes, it is a better solution to get the one on the ftp as its an .exe file...
if ever anyone needs it, get it there!!
thanks guys, sorry for the hassle, i looked but couldn't find the file thats y i asked for it, thank u both for help.
Sorry, I found out about the existing .exe just shortly after I got the backup. However... I appreciate it anyway!
I am looking for a software to extract WM6 from a Treo 750v I am testing...
Thanks for your help.
Can anyone help him out so us Treo users can get some WM6 lovin'?
Have you tried following the standard instructions, eg
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
V
Please post the rom, i'm in need of internet sharing bad.
phaijai said:
Can anyone help him out so us Treo users can get some WM6 lovin'?
Click to expand...
Click to collapse
Quoted for the truth!
Could i put the vodafone rom on my cingular 750 ?
onthezone said:
Could i put the vodafone rom on my cingular 750 ?
Click to expand...
Click to collapse
That all depends on being able to build a flashable image from the extracted ROM - something which has yet to be accomplished on the 750.
It won't be too difficult, it will just take some coordination - first we need said image built, which could probably be done with the existing tools. Second, a bootloader will need to be modified to allow for an unsigned ROM.
It would be much preferable to get hold of a ROM image in nbh form. That would need to come from someone within Vodafone or ATT, or any number of the folks who have access to their test WM6 builds in nbh form.
I'll probably mess with the older extracted WM5 ROM this weekend to see what I can accomplish with istme's tools.
Which AKU / Build is the WM6 Treo 750v rom you have?
I can't change the security policies with any of the tools from that doc :-(((
Help !!!! I need somebody HHHEEELLLPPPP !!!!!!!
;-)
I'd help but I have no idea how dumping roms work. I looked at the page, just make sure activesync is up, what exact error message are you getting?
We need to bump the tread, someone help
What version of windows are you running because i have vista and nothing is working right.
Don't waste the time, the guy doesn't have wm6 treo 750.
krakookassz said:
I can't change the security policies with any of the tools from that doc :-(((
Help !!!! I need somebody HHHEEELLLPPPP !!!!!!!
;-)
Click to expand...
Click to collapse
You can follow HANNIP istructions on treocentral to try to dump the rom.
http://discussion.treocentral.com/showthread.php?t=137317&highlight=treo+750+dump+rom
The explanations are on the #11 post.
cellneuron said:
Don't waste the time, the guy doesn't have wm6 treo 750.
Click to expand...
Click to collapse
Why would you say that hr doesn't have the wm6 rom?
onthezone said:
Why would you say that hr doesn't have the wm6 rom?
Click to expand...
Click to collapse
Because I believe a person who with normal IQ wants to extract a ROM can do it within one day, let alone one week.
cellneuron said:
Because I believe a person who with normal IQ wants to extract a ROM can do it within one day, let alone one week.
Click to expand...
Click to collapse
Not to be rude or anything but this guy could be a very busy person and maybe with the treo 750 they put a code on it to not let you extract it for the betas for this exact reason. I must just trust people on things too much or you just not trust anybody that won't do anything within a week. I doubt its on his priority list either since he's no benefiting for this except the fact of pleasing other people.
Hey guys plz help me.
I screwed up my ameo by installing a new rom without unlocking it first. now i cant even make a hardreset. but i can go into bootloader.
I need original german tmbile rom. i think this is the only that my device will acept and then unlock it and start it again. plz help asap. because i cant use it anymore.
Sexxmax said:
Hey guys plz help me.
I screwed up my ameo by installing a new rom without unlocking it first. now i cant even make a hardreset. but i can go into bootloader.
I need original german tmbile rom. i think this is the only that my device will acept and then unlock it and start it again. plz help asap. because i cant use it anymore.
Click to expand...
Click to collapse
When you bought the device,did you have a CD called ROM update utility or something like that? I have it with my Dopod.
hmm no i dont think so, but i can search my hundred cds
I found a cd with varios programms but no rom update utility so far.
Perhaps you could also advice me how to backup the original rom and install it if possible.
I know somebody else with a ameo. perhaps he can help.
Sorry, I don't have that experience. I would gladly help you if I know how. I'm sure there are many developers especially the ROM cook who know this like the back of their fingers. Come on, give this your guy a hand.
Check Mahmoods page here - http://mahmood1.com/ameo_athena_htcx750_WM6_ROMs.aspx
He has a list of available Roms near the bottom of the page.
Thank you for the link, i downloaded the tmobile rom but it didnt work i think because its not german.
Wrong vender id error. I need the original german rom to restore my machine and i think then i can update it.
Any german guys reading this? Somethere it must be avaible. or can somebody tell me how to extract rom from machine, becaue a friend of mine has the ameo too.
Does anyone have the original Touch Cruise ROM - I think it's version 1.28.408.15 (WWE), dated at 22.02.2008 (I almost sure).
I'm relatively a newbie, so if possible I would appreciate if it would be in installation or .nbh file.
Thanks in advanced for anyone who can help
Yes, i have the original rom, buth how i can dump this original rom?
I also "upgraded" from this rom to 6.1-only trubles since then.
does anyone know where can we get this rom back ?
thnks
I'm looking for a way to dump the ROM - nothing so far - at least nothing for someone like me...
emonk said:
Does anyone have the original Touch Cruise ROM - I think it's version 1.28.408.15 (WWE), dated at 22.02.2008 (I almost sure).
I'm relatively a newbie, so if possible I would appreciate if it would be in installation or .nbh file.
Thanks in advanced for anyone who can help
Click to expand...
Click to collapse
Look at this thread, you have links to all sort of ROMs.
Greets
http://forum.xda-developers.com/showthread.php?t=381600
emonk said:
Does anyone have the original Touch Cruise ROM - I think it's version 1.28.408.15 (WWE), dated at 22.02.2008 (I almost sure).
I'm relatively a newbie, so if possible I would appreciate if it would be in installation or .nbh file.
Thanks in advanced for anyone who can help
Click to expand...
Click to collapse
How about to try this original new shipped rom
http://forum.xda-developers.com/showthread.php?t=427499
I tried 3.13.405 and it's not stable nor faster than the original. However one of the links is a guide on how to dump a ROM, and it seems easy enough. However I did not manage to do it with my own device, probably because it's a "working" device, with activesync partership.
I need the original PTG Touch Cruise ROM.
OK, I found a solution. One of the links posted above is a stable WM6 ROM, with the original apps and nothing else:
http://210.64.124.194/download/RUU_...o_sign_25.69.30.05_1.58.25.14_murata_Ship.exe
I hope it will help all of us who got frustrated by WM6.1...
Stupid question.
What meens SEA after WWE?
glb2008 said:
What meens SEA after WWE?
Click to expand...
Click to collapse
only thing I can think of is "South East Asia"
emonk said:
OK, I found a solution. One of the links posted above is a stable WM6 ROM, with the original apps and nothing else:
http://210.64.124.194/download/RUU_...o_sign_25.69.30.05_1.58.25.14_murata_Ship.exe
I hope it will help all of us who got frustrated by WM6.1...
Click to expand...
Click to collapse
will give it a try
thanks
SEA for South East Asia makes sense, because it defaulted at Singapore time zone when I started it. Anyway it works perfectly for me (I live in Israel, and we use the European GSM frequencies here).
Hi All,
After spending a large amount of time trying to find a solution for the SPL 1.24 to hack. Mainly the Telstra Australia WM6.5 Upgrade. Combining the many efforts of XDA Members I finally got a proper working hack going. I thought I'd post it straight away for the rest of the world to see.
First what you need to do is download the WM6.5 Upgrade from the HTC Website. When you open this you need to go to Start - Run - Type %TEMP% Find the location where the extractor has dumped the files and rename RUU_Signed.nbh to MAPLIMG.nbh. Copy this to the root of the SD Card. Reset your phone into Bootloader and let the flash start. It will fail at 10% than reset itself and install it properly.
From here you need to download a cab clearsecurity.cab which is suppose to be for the Samsung Blackjack 2 but it enables the HTC Snap to be hacked.
From there download the desired Custom Rom and run 1.19 auto.bat and watch the screen go black and the custom rom install.
Any Success???
Hi, can anyone let me know if they have had the same success???
Hi Roger,
Thanks for the post as it worked a treat for me, I was able to flash the HTC Snap after following the above steps. One thing I didn't do is backup the Telstra spl 1.24, Do you know where I can get a copy from?
Once again thanks for the post.
Mr.D
THis looks great. I'd love to try this now, but before I do, I'm hoping you might be able to answer a question of mine, to ease my mind:
If you need to reinstall the original Rom and SPL 1.24, is there any way the the Telecom company can see that the phone's firmware has been previously changed?
Thanks.
Flashing back to Telstra 6.5 Rom
Hey guys, I believe you can just download the latest 6.5 Telstra Rom for the snap from the HTC website. I havern't tried it since I have hacked the phone and the only reason why you would obviously do it is for warranty. Actually I also found out that you can get WM 6.1 rom but you need to contact HTC and you can upload it from there FTP. Sorry I can't provide any more assitance maybe when my phone breaks and I need to flash it back I will post up what I have done.
Hi Roger
Thanks for the reply. This is what's stopping me from trying to flash the ROM. Knowing whether I can restore it back to it's original condition without the telecom company knowing it's been flashed. The phone is only new and if it does develop a hardware problem and I had to send it back, I'm sure they won't fix it under the warranty if they can see that it's been flashed.
If as you suggest, it's just a matter of re-flashing it with the original rom, then that's fantastic. But, I'd really like some firm confirmation before going ahead.
The ROM developed by ookba looks AMAZING and I can't wait to try it.
Thanks.
Flashing Advice
Hi Badcam,
I have owned many HTC phones and I have to say the Snap is probably the most durable out of them all. I find with the Snap and the newer models of the HTC phones from australian carriers they really lock them down and you don't get the full functions as what you pay for. Worst of all they infest the phone with all these carrier features that are not needed.
It is really your choice flashing your phone. Every single phone I have had I have flashed and never had problems only when I drop them lol. For warranty purposes you can always flash back to orginal rom and just tell them thats how you got it. They really can't say much. But I did abit of reading and when you do upgrade the rom from HTC website it does install SPL 1.24 back meaning if you want to flash it back you need to go through the hack again.
Hope this has been helpful.
You said it Roger.
There's so much Telecom rubbish on this phone, it's not funny.
Well, I'll give it a go this weekend. If you're happy it's going to work, I am too. Thanks very much for your advice.
Hey do you guys know how much (in USD) a Telstra SNAP is out there if you buy it outright? Can can anyone ship me one to the States?
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Badcam said:
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Click to expand...
Click to collapse
Thanks but that's kinda rough. I get the MAPL100 (Dash 3G) here for $100. Looking to get a SNAP S523 for around that, even used. Let me know if you run across one. Thanks!
It's atrocious. Believe it or not, that's a good price. It's just come down NZ$200. Of course, I had to buy my two days before the reduced it.
I'll keep an eye out.
roger.higginbotham said:
Hi, can anyone let me know if they have had the same success???
Click to expand...
Click to collapse
Hi, can anyone tell me how to get the device into bootloader mode? i have followed the steps, but getting it into bootloader mode and then letting it hardspl from the sd is not happening :-( THANKS!!!
Can't find clearsecurity.cab. Can anyone tell me where to find it?
Attempt to answer questions lol
Benzin,
Type in google "clearsecurity.cab download" and find the mediafire link
If you have problems please let me know. Maybe XDA-Developers already have it posted.
wcampagne,
So you are getting into bootloader right, its just not picking up the MAPLIMG.nbh file. You have renamed RUU_Signed.nbh to MAPLIMG.nbh. Also a train of through if you have tried applying previous Roms before hand I suggest you go to %TEMP% file and remove anything that is there that has reference to RUU_Signed or the rom at all. You are probably uploading the wrong file as it might be cached. As I said its just a train of thought. If you have any more problems please feel free to post up and I will figure out a fix for you.
Ookba,
Ebay is your best bet. I got my handset for $150 AUD brand new on bid.
Works great for me and I thank you so much!