Related
Hi, I am looking to get a O2 Mini, however I am not sure if the bluetooth system support the handsfree profile, I want my phone to connect with a bluetooth kit that only recognize handsfree profile. Thx
Chris
O2 Mini supports Handsfree via bluetooth. Using it myself with a thb bluetooth Car Kit....
Stefan
You can even hear mp3 with bluetooth at mini
How that? This is the first time I hear somebody claiming that the Magician is capable in doing this. Which ROM version do you have?
Nsriza,
Have you actually got the bluetooth/MP3 working on your JAM??
MP3
Wich Bluetooth stack do you use to listen mp3 and how do you do it, please ?
Wich Bluetooth stack do you use to listen mp3 and how do you do it, please ?
Click to expand...
Click to collapse
I don't think this is possible on the Magician yet else it would be headline news!
hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/
audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?
:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter
ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?
this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951
When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100
Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter
Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com
I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter
Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond
audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers
ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762
tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.
have you guys tried VJVolubilis? It should work in the same manner.
V
Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.
hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....
First post and delivering such a revolution? Makes me nervous...
Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.
Could this be? Can anyone verify?
Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate
very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best
Works here aswell!
it even seems to support bluetooth printing???
---
just downloaded.. will give it a try.
thanks.
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.
INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?
Does this help at all with the Nokia car kit echo issue?
Cheers
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree
Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?
leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:
But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)
It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!
Hi guys
I know this has probably been asked before and I have searched the forum and read many threads - some of them get very technical!
Basically, what I want to know is, is it possible to have the other sounds the MDA Vario II makes output on bluetooth?
I'm a biker and have a BT equipped Helmet (Nolan N-102). I use TomTom Navigator 6, Windows Media Player and sometimes listen to the radio via 3GPRS internet connection. I'd love to be able to hear all this audio in addition to the mobile phone!
I'm sorry if this is rather 'old' for many of you!
JC
If your helmet has stereo bluetooth (A2DP) than it does so by default.
There is somewhere a tread here about the option to also output all sounds to a mono bluetooth headset. I didn't try that myself.
Look at this thread
http://forum.xda-developers.com/showthread.php?t=278778
I use it and it works great.
Thanks guys
Still struggling with this one but hopefully crack it someday!
Just had a reply from Nolan, the manufacturer of my bluetooth helmet:
'As per your request, please note that our N-Com system does not support the A2DP profile for listening to music via Bluetooth.'
I guess this maybe a reason why I can't get BT comms from the Vario except for phone
If you read this post
http://forum.xda-developers.com/showthread.php?t=278778
It will tel you how to get all sounds to your Bluetooth headset. I use it to listen to music in mono on my headset while walking. I use the Mort Script. It's the bomb.
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga