USB Phone via telnet? - P3600 General

My Trinity has VoIP available but nonetheless - as far as VoIP is concerned - I would like to just use it as a USB phone connected to my PC. It connects through USB so is it possible to use it as a VoIP handset?
I have already searched a bit on this topic, and have found that just using the ActiveSync connection won't do the trick since one cannot access the mic/speaker through USB, only data transfer as files or sync...
But I know of other client/server programs that do some telnet stuff over the connection, in order to transfer keystrokes, mouse and screen data. Would something similar be possible for what I have in mind? I just hope that the overhead or lag would not be too much. And I know for sure that other people would also like this feature
Anyone willing to give it a go, or know of an alternative?

Related

shot in the dark...

This is a shot in the dark, but has anyone heard of anyone who got the mogul to work as an access point? Basically, use the evdo radio to connect to the internet, and use the wireless connection, either as an adhoc connection, or preferably as a full on access point with wpa2 to share to a laptop, other devices, etc. To better describe this, you can kind of do it with a laptop:
1. connect phone via ics or dun to laptop.
2. in windows, enable ics and create ah-hoc network with encryption.
3. Other laptop connects to windows laptop, gets wireless connection and is effectively using the phone as an access point.
Even better
1. Connect phone via dun to linux laptop.
2. Linux laptop (using madwifi driver or other open source) broadcasts access point settiings and works as a full on access point.
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
search for socks proxy.
it doesn't work that well, but it does work..
-mark
jtlonthewestside said:
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
Click to expand...
Click to collapse
Ummm... I'm not sure what you are basing your Bluetooth information on, but the BT specification allows for up to 8 concurrent connections at once- one master devices and 7 slaves. Why do you think its only one at a time?
I use multiple connections all the time- Very often I have my phone connected to my bluetooth GPS receiver in the car, and at the same time I'm playing tunes from the same phone over my A2DP compatible car stereo... or, take a phone call on my BT headset, and all the while I'm still connected to the GPS who is still tracking my location using bluetooth. I can tell the person where I am in real-time.
I've also had someone send me a file while talking on the phone via BT headset.
You don't need such a complicated solution for your imagined problem! I don't see any reason you can't tether it and still connect to up to 7 more Bluetooth devices at the same time!
Still, using it as an access point might prove useful for other sorts of scenarios (teleconnected mobile Lan parties? WiFi on a Bus? The incredible moving hotspot?), but you don't need it... at least not for your described scenario!
Basides, you'll get better battery life out of your connected devices if just using BT instead of WiFi!

Wi-Fi Dongle and HTC Wizard... We need a router too, no?

Hello Everybody,
I have got my HTC Wizard damaged. Actually till last night it was working fine, but now when I plug it into the USB, windows says that the USB device has malfunctioned etc. I search Google and everybody said that they tried hard-reset too with no luck.
So then I started searching Google to see if I could find a wi-fi USB dongle. I do have a Bluetooth dongle but since Wizard has got Bluetooth 1.1 (I guess!) so the transfer rate does not accede 15 Kbps. This is something annoying.
Now, my main question is, that if I order a Wi-Fi dongle, will I be able to transfer files from my PC into my HTC Wizard without any intermediate router or any other network or something? A Wifi dongle is cheap, $9.9 on Google Products. But a router isn't, its at least $250 or so.
Also, if somebody has some experience with this, please do post back the speeds at which you think the data will be transfered. I am only looking for an alternate to USB. If a Wi-Fi dongle could work, it would be great! I already hate wires. I love wireless stuff.
People with experience of trying this please write down any more details that you might have. What's the maximum range of a Wi-Fi network (usually).
Thanks in advance.
I'll be waiting for your replies. Please do post back.
Can o' worms...
You'll be hard pressed to get a response. I bought a Wfib router for $12 on ebay six months ago. Most of the developers here have wfi cards in their PCs, so using a usb port is kind of a waste/pretty antiquated.
Yes, you could connect with the wizard's wifi to your PC, and transfer files with Total Commander (all over the forum & google-able), but I'm guessing no one wants to try to tackle steering someone who can't/hasn't googled a decently priced router, or feels the need to use usb for wifi. You'd have to set up a windows network, too. Wifi, if you haven't used it, is a whole new can of worms. All the info you need is out there, but you'll have to find it.
My suggestion is to dust out your ppcs usb port gently with a soft, new toothbrush, uninstall ActiveSync on your PC, reboot & reinstall, reboot, and use a different usb port on your pc. If that doesn't work, I bet you could send it in to get repaired for about $40.
Actually, I do have some knowledge of computers and can usually fight back in situations that are confusing. I am not a Pocket PC/Windows CE programmer, but I know Visual C++ etc and many other languages.
I was just wanting to know if there could be an intermediate device that could be needed that's why I posted the question. And thank you very much for the response. It was very kind of you.
I have two more questions now:
1) If wifi is like LAN, then why would we need total commander to browser files? Can't there be a way to browse files like we do usually on LAN? I mean as far as I understand, total commander would perhaps only 'share' the files over lan? Correct?
2) At what speeds can we transfer data over wifi? And what is the usual range (in meters) of Wifi data transfer?
Thanks in Advance.
Krix said:
Hello Everybody,
I have got my HTC Wizard damaged. Actually till last night it was working fine, but now when I plug it into the USB, windows says that the USB device has malfunctioned etc. I search Google and everybody said that they tried hard-reset too with no luck.
Click to expand...
Click to collapse
Have you tried another USB port? Or another cable?
An unstable USB hub gave me similair problems.
Wifi *is* wireless LAN.
Wifi equipment (cards, adapters, routers) are just a replacement for the ethernet cables etc., with a few software security measures so people don't "tap in" without an invitation.
There are a million different apps that browse files. Not too many apps do sharing without browsing anymore, so I've started using sharing to mean both (sharing + browsing). TC is free, it has a (wifi/LAN) network function under "extras," (aka "//") has a txt editor and as many other extras you would want in browser. I'm not sure what you mean by "the usual way." The built in File Explorer? I don't know, and don't care, if the WM6 browser has a network plugin, I have never used it (nor Resco or any of the others) since I found TC.
You should be able to connect directly from your Wizard to your PC's wifi if you can set up a TCPIP network and assign them (the wireless part only) IP addresses. You'll want to set up your PC to act as your router by allowing the PCs internet connection to be shared. (Internet in via wire, wireless out & back to the rest of your network, incuding devices.)
I've never tried it without a router, though, but it worked fine with the LynkSys one I got on ebay for $12.
The new/different cable is a good idea.
Forgive me, but this thread, if I kept answering questions, could eat a lot of my time. If you're still stuck on the Wifi thing, there are too many great sites explaining how it works.

Vogue internet connection via Bluetooth?

I'm getting an HTC Touch Vogue in about a week or so. I am a bit frustrated that Sprint still doesn't offer EVDO in my area (Beaumont, TX which isn't exactly tiny). Since WiFi is sacrificed in the Touch, I was wondering if one can use the bluetooth to share internet from the PC? If so, are there any specific requirements as far as a bluetooth adapter on the PC side, or would most generic bluetooth adapters work?
Thanks!
syncmate
i have seen something about sync mate 1.4 doing this, but have had no luck myself.
Getting it to work isn't straightforward, but as long as your data plan includes PAM (phone-as-modem), it DOES work, and is officially supported. You don't even need official drivers from Sprint to do it.
There's a caveat, though: if you have a bluetooth mouse and you tether the phone via bluetooth & activate internet sharing, the mouse's performance is going to go to hell. It'll stutter, miss clicks, and generally drive you nuts. As a result, I now carry a short USB cable, and almost always tether via usb if I'm using my mouse too.
Make sure you do the following steps in order:
1. Connect the phone via usb and sync. If you can't do this, I guarantee you won't be able to get online, either.
2. Share the phone's internet connection via usb. If you can't share via usb, I can guarantee you won't be able to share via bluetooth, either.
3. Disconnect the usb, and try to sync via bluetooth. If you can't sync via bluetooth, you won't be able to share the internet via bluetooth, either.
4. Share the phone's internet connection via bluetooth. If it doesn't work, make sure you're connected to the phone (go to bluetooth neighborhood, right-click the phone's icon, choose "connect"), and make sure you successfully managed to do steps 1-3. Until the first 3 steps work, you're wasting your time with step 4. ;-)
^^^ I think lotherius is trying to use his home internet connection to share internet with his phone (accessing through your PC/Mac as opposed to through your phone) Hours of goggling has led me to nothing on this
edit:
if your using a pc, doesnt activesync have a pass through feature that allows this?
If what you're saying is you want to view internet on your phone, through bluetooth on your computer, then yes, it is completely possible. On my phone all I have to do is sync my phone via bluetooth, and it works automatically.

USE G1 As External GPS On Laptop - Can This Be Done

USE G1 As External GPS On Laptop - Can This Be Done
The reason why I am asking this is cause I am building A Car PC.
I can use the G1 as A Wifi Connection Surf The Net With Internet Explorer, Firefox, etc....
But It would be great to use with MS Streets Of Garmin PC, etc... with the Dreams GPS
If this has not been done yet it would be great if some one could (Must Likely a Developer) make a program that can do this
Thanks In Advance
And I Also Already Did This SEARCH FOR USE G1 As External GPS
im pretty sure this has been covered b4 but im not 100% and the answer then was no( i personaly dont know but i remember seeing a bunch of people saying no) well hopefully thats helps a lil..
maybe the dream uses a comport to communicate with the gps reciever, if that is true you may be able to redirect this to a bluetooth-comport
It may be possible, but I really don't think it would be worth the tremendous effort, considering GPS dongles can be had for less than 20 a pop.
I think it would be awesome to do since it's one less piece of equipment to carry around.
All it would take would be:
A program to take reading of the GPS info.
Convert it to the proper format (emulating a GPS dongle which isn't hard.)
There already are various programs that can send data to the PC. Use one of their code.
Have a program on the PC to translate it all into a virtual com port.
But then... I'm not a programmer. And the way I discribe it would be more like a hack than a proper program. But I don't believe the android API's allow you to control the way that the USB or the Bluetooth is identified by a computer.
It can be done but I don't think android naively supports the serial port profile over bluetooth which you would need to accomplish this. Once you figure that out all you need is to get your phone to spit out NMEA location data over that connection and your laptop will see it as a Generic GPS device.
phin1ght said:
It may be possible, but I really don't think it would be worth the tremendous effort, considering GPS dongles can be had for less than 20 a pop.
Click to expand...
Click to collapse
Indeed, and if you're building a CarPC, a small GPS dongel - that can be placed in good line-of-sight - is the better option anyway.
-bZj
I would prefer connection over internet or WiFi as it won't be easy to provide sky view to an laptop or pc so any user may place his laptop or pc at an place, get near an window for sky view to his android phone, then the data would be transferred to pc via internet or WiFi connection instead of connecting usb chord each time...
There are already apps like printer share which uses the phones internet connection for printing, also the upcomming app teradesk that lets an user to get files from his pc even when we are far from our pc,.....
Both apps use a server and client method for data transfer... so hope this would be possible...

Using Windows Mobile phone as a USB WiFi receiver?

I was wondering if this is possible. I've heard of people using ICS Control to turn it into a hotspot, but I no longer have a working WiFi card. I just got a new computer with Windows 7 and all I can do is use the built-in Internet Connection Sharing that comes with WinMo until I get a long ethernet cable to wire from my router to my room.
So I was wondering if it's possible to use the phone's ability to receive WiFi to share that connection with the computer. I'm sure there's some way for it to be done. Any suggestions?
I have the same question
same situation here.
After some searching, I've found a program called "Serialtunnel" and "wmtunnel" that is supposed to do just that, however I cannot find any working download link...
Let me know if you find anything.
http://www.wmwifirouter.com/
Will work as wifi to usb, making your phone a WIFI usb adapter. I use it with my desktop when hooked to my TV in the livingroom, rather than a 35 foot cord.
Its as simple as= plug in phone, start Wmwifirouter , touch wifi to usb button.
Battery charges while working so it doesn't kill it.
phone's ability to receive WiFi to share that connection with the computer can only be obtained if your phone allows to do so. check out the official site of your phone developrs. there will definitly be some considerations about this
Two solutions
Found two programs that do just this, both work on Windows Mobile (and unfortunately not on Symbian), but are supposed to do just what you're looking for.
ICS Control
Serial Tunnel
IF anyone figures out how to get this (converted) to run on a Symbian device... Thanks.
Anyone?
Bumping to re-ask question.
WIFI
i didt understand
ravichandrabr said:
i didt understand
Click to expand...
Click to collapse
I'm looking for a program that can "Wifi to USB" on a symbian (Nokia) phone.
In other words, I want to use my phone as a wireless adapter for an old pc without wifi.
would prob get more luck asking in a symbian forum

Categories

Resources