Atom Life charging problems - iPAQ rw6828, XDA Atom General

I own a Life and i think everyone knows that the battery runs out so fast. I don't wanna bother bring my charger to work since i have to charge at home so i decide to bring my USB cable to work and plug into my computer at office. My office computer using Windows NT so the USB is not supporting by windows but anyway i thought it works for charging only but i found out it doesn't work. Is there a way that i can charge my phone at work with only just a USB cable ???
Thx for the help!!

i found out that it will charge when i turn off my phone ...... but when i turn it back on it won't. Anyone can help?
Thx

Actually it did charge your device (if the LED turns to red) but very slow because the power for the USB is very low. That is why if you keep on using your device while charging using USB port, it seems like it is not charging.

Related

Charging XDAII via USB

I have just found that my XDAII is charging via USB -- is this a 'designed' function ?
I took my power cable home and left it there and docked the XDA in the morning at work, to my suprise the screen brightened (as i have it set to dim on battery) and it is charging !! BONUS
Now I can leave the power cable at home (I sync via WIFI at home anyway)
---DELIGHTED----
yep that is designed, a benefit above the old ipaq
BUT be aware, it will NOT charge the additional battery slot in the craddle, you still need the charger for that
fishmedia said:
I have just found that my XDAII is charging via USB -- is this a 'designed' function ?
I took my power cable home and left it there and docked the XDA in the morning at work, to my suprise the screen brightened (as i have it set to dim on battery) and it is charging !! BONUS
Now I can leave the power cable at home (I sync via WIFI at home anyway)
---DELIGHTED----
Click to expand...
Click to collapse
Yes. XDAII can be charged by USB - you do not need to use the "power cable", USB itself is enough. And surprisingly: USB charging is fast enough.
usb is 500mA pr powered port
a powered port is a port in the pc or a port in a hub
if the hub is not powered and you have alot of other stuff
the xda will get less power and it will take longer
500mA is ok current to charge with imho
Well is saves buying another charges. as you need definately two of them, one at home to cover the weekend, usage and one at work, to cover the dailly job :lol:
Are you really sure that it is charging if the battery is under 30%? For me with older firmware (1.52) it can charge only if over 30%! In other cases it shows "Charging" but really it only faster discharges because of brighter backlight.
Is this behaviour fixed in 1.60 firmware?
I can actually charge from compete NILL, :lol:
charge vis USB
I find my xdaII charges much more slowly by usb alone.
From my laptop it took 2 hrs to charge from 40% to 100%, with the power adapter it takes about 30mins.
USB charge but canĀ“t sync
Hi,
Can I use XDA usb cable on XDA2 for sync and charge? Is it the same cable?
Yesterday, I suddenly stoped the sync and I cannot perform it again after that. Could you help me to solve this problem?

XDA Mini S + USB Charging

Not sure if this is right part of forum, but here it goes.
I am having an issue with the charging of my O2 XDA Mini.
If my battery dies, with still a small bit of power left in it (enough to get splash screen) and I go to charge it works fine no problem. Now over the wkend my phone died on my and I left it till this afternoon when I tried to turn on, it wouldnt turn on at all (not even splash) because obviously the battery is completely dead. Now when I go to plug it in, it wont charge, from USB cradle, the little orange light to say that its charging doesnt even come on.
Last time this happened I eventually got it to work via a friends socket (plug) charger, rather than USB, charger. Is there any reason for this or anyway that it can be fixed that even when the battery is completely dead I can charge it from my USB cradle.
Any help would be apreciated.
Thank you in advance
Rattlehead
Sorry to bump this, but does anyone have any idea. I beleve the cause of this is due to the fact the USB power from the PC isnt enough to get the charging process started, is there anyway to get this done via the cradle.
Thanks
Rattlehead
You'll need to use a charger that plugs into a wall socket I'm afraid. This happened to me once & that was the only way I could get it to work. If you search on Google, you'll find methods that involve a stripped down usb cable, but a wall charger is definately easier.
Good luck.
Should any usb based wall charger work?
I have a Motorolla one and Ive tried that but that didnt work.
I know for a fact that when I use my friends one it works and will charge, but he aint round for another 2 weeks
Poop
Rattlehead.ie said:
Should any usb based wall charger work?
I have a Motorolla one and Ive tried that but that didnt work.
I know for a fact that when I use my friends one it works and will charge, but he aint round for another 2 weeks
Poop
Click to expand...
Click to collapse
You cannot charge a totally flat battery through usb cable using PC,cuz it only supplies 0.5(500)amp,whereas to get the dead battery back into charging,it requires a supply charge of 1.0(1000)amp,secondly you can only charge the phone via usb if it's working normal and not when it's dead,as you cannot boot into OS.
Therefore,it'll only start to charge with a 'Wall Charger' which only supplies 1.0 amp,your friend's Wall (Mains) charger must be suppling a 1.0 amp charge.You cannot even charge it with the Motorola usb charger cuz it also supplies only 0.5 amp.So try to get a Wall (Mains) charger to get it start charging.
OR,
Yes! you can Jump start the battery using Motorola charger,but you'll have to sacrifice the motorola charger to do it,as you'll have to cut off the usb plug of the charger cable end and attach the 'Red' wire to the '+' (Possitive) connector of the battery and black wire to the '-' (Negative) connector of the battery and give Shock Charge to the battery for 10 seconds,repeat this for 4/5 times,it'll give the battery a jump start and will increase the 'Pulse' level of the battery,after that put it in the phone and check if it loads up,if it does then you can charge it via usb cable connected with PC.
Good luck
BTW ! there's an excellent thread regarding charging to avoide the battery to go flat and saving from getting into this situation,it wud be very info for you,check it also :-
http://forum.xda-developers.com/showthread.php?t=342162
Cheers
zabardast_1 ,
You are the Guru ~
sorry couldnt reply to you before now, zabardast_1 thank you so much.
Thats great will have a look tonight and see what I can do
Here is a simple way of solving the problem, go and buy a charger, they cost next to nothing.

HTC TyTN does not charge anymore.... Need Help

Hi Guys
I have a problem with my TyTN at the moment.
My device is not charging.
Yesterday i put it in my Docking Station and wait a little time.
But Now the Tynt isnt charged.
I think ist a Problem with my TyTN Hardware.
I have all Power Supplys used they i have, but it doesent work.
Can you help me?
Its this a problem with the accu or a fuse on the circuit ?
Sorry for my broken english i hope you understand me.
Regards Patrik Laube
Hello,
first of all, try to soft reset the device.
If it fails, hard reset it.
If it doesn't work, go the service center.
Good luck
The above advice is fine. But you did not say if any of the LEDs are lit.
Do you get the red NO CHARGE LED?
Does your phone operate normally except for not charging?
Mike
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
I had a similar problem, which was sorted by a new rom, but I ascertained it was software problem when I realised it charged when powered off.
PatrikLaube said:
Hello
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
I'm having an issue along these lines, also.
My phone has been working fine untill the other night when I tried to charge it via the wall electrical outlet. It will not charge at all, the battery has been drained to nothing and I can't turn it on. The yellowish light doesn't turn on when I plug it in like it used to.
I don't know if this is a battery issue or an issue with the USB connection inside of the phone. On a side note, when it did have power and I tried to connect it to the USB via the PC; it didn't work. The phone was on, but the computer didn't even notice the phone was plugged in. That leads me to believe it would be a connection issue; but I'm not quite sure.
If anyone has anything they can add to this I would appreciate it, thank you.
P.S. Bringing it to a service center is a bit out of the question in the mean time seeing as it was bought on eBay and funds are limited for the time-being.
MiZi666 said:
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
Click to expand...
Click to collapse
Hello, I cannot find the "When Device is turned on, do not charge the battery when connected to the pc" in my device. My Rom is WM6.1 CE OS 5.2.20273 cooked by dvha79_ddt.
My HTC TyTN has the sample problem, but i can use the USB to charge normally. It cannot work using my AC adapter Only when the device is open...
About your Battery Issue.
I'll tell you exactly why ur phone isnt charging anymore... If you have been charging it alot on the USB or pretty much any!! charging on the USB u have killed ur battery, never charge your phone on the USB it kinda sucks they should make these phones able to be Sync'd thru USB without a battery cause these batteries should not be powered thru the USB over Time... from syncing to your pc will kill these batteries i have noticed that when u sync this Tytn Ithru USB and the device is at say 70% it charges up to 100% pretty fast i would recommand to you and anyone who reads this dont sync your TYTN or any HTCC phone for to long to the USB Cause it will Trash your batteries Life down the road... Hope this was HELPFUL.
Cheers
Paul
PatrikLaube said:
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
does anyone has a solution to this ?
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
gypsygirl13 said:
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
Click to expand...
Click to collapse
Are you using an official 1000mA charger? (Not a 500mA one) 500mA ones work, but they are under-powered and can cause strange behaviour, like not charging whilst turned on or whilst on a call. Similar problems can be found with car-chargers that will not charge until the device is soft reset.
Mike
^no it's not the official charger, I have this usb wall charger called Power Juice (phone and mp3 charger).
Input Voltage: AC100-240V
Output Voltage: 5V
Output Current:1000mAh
Do you think it's because I'm not using the original charger?
fixed my charging problems
The boyfriend told me to try a new cable for my charger so he bought me a 5pin usb cable, tried it at home and it worked! I still need to turn off the screen sometimes but that's ok at least I don't have to turn off the phone anymore. Now my battery charges less than 3 hours.
Hold both SoftKeys and Then press the Power button
Or you can also hold both softkeys and then put your stylus into the reset hole.
answer why it does not charge through the usb
Sorry for the very very late response. Under electrical legislation all hand held electrical devices must be insulated and fused. Some of the chargers that you can purchase are sealed without fuse which indicates that the phone has a fuse contained within its circuitry (or there may be 2 fuses one in each device) .
The problem you have encountered is that you have connected your phone to a computer or mains supply to charge. There has been a surge in the electrical supply either on connection or by un-connecting from these supplies (e.g. connect to the computer as it is booting would see a 65w signal through the USB) and this more often than not blows the fuse which sits on the PCB (printed circuit board) just after the usb connection internally to the phone.
you can either have the fuse fixed for 20/25 gbp or you can purchase a new circuit board or you can use an external charger for the battery. As it is only the power input point that is faulty.
hope this helps
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
cyberdroxxx said:
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
Click to expand...
Click to collapse
Never tried stripping down a battery, some things... well, just don't seem worth it. However as a learning exercise it might be interesting. Without lots of testing on a good battery with a multimeter then I have no clue what the readings should be between all the contacts. (Now there's a little job for you) It is as likely the internal structure of the battery is screwed as it is to be a wiring problem.
If you solve it you can certainly report back here
Mike

Nuked the battery on my HP 614c - any ideas?

Help
seemed to have killed the battery on my HP614c ->
battery was at lowest point ( ie last bar) but had check my email for something urgent so i hooked the HP614c up to my laptop and used internet sharing,
the power from the usb was keeping the fone alive - phone tried to switch off about 5 times but usb power was keeping it from doing so, eventually the phone auto powered off but by that time the battery was left with no charge in it what so ever !!
If i start in sd loader the charging light comes on (ie it seems to be charging the battery then), but when phone is off or if phone is switched on in normal mode, the battery does not charge at all - i think I have killed the battery totally. If i switch the phone on the charging light would come on but there is not enough power in the battery to be on for more than one second .
Is there any other mode like bootloader that will enable me to only charge the battery up ?
or does it look like I have to buy another one
have you tried leaving it charging all night with the AC adapter?
I had same problem with a blueangel...
Solution? Buy a new one battery.
ok , strange one ...
got another hp 614c handset, but both batteries charge on the new fone
(so it wasnt the battery)
basically on the old phone what happened is that when the battery was at its lowest , i connected it to internet sharing via usb port
( it kept trying to turn off but stayed on - which i though was due to usb power keeping it alive ) - that was the last time the phone was able to ''charge''... it was charging perfectly before that.
so i 2nd presumed i had damaged the usb part of the old phone
however when i connect it to usb the phone connects via active sync perfectly and as a storage device ! it is fully operational apart from charging of the battery ?
surely if the usb port was damaged it would not connect via active sync etc ?
I am confused ..
anyone shed any light on this?
FOUND THE PROBLEM
MY 64 GB USB STICK (WHICH WAS PLUGGED INTO THE SAME PORT ) IS DEAD ALSO !!
LOOKS LIKE A PROBLEM WITH THE DESKTOP COMPUTER - MAYBE A POWER SURGE
..... ARRRRRGGGGHHH ( APOLOGIES FOR ANY WASTED TIME )
STILL SEEMS STRANGE THAT THE USB TO PC PART OF IT WORKS FINE STILL BUT NO CHARGING? WHY IS THIS?
Solution (for me anyway) for battery problems
Hi!
I had this problem some time ago.
If you use 220v charger connected to the phone, the red light will probably be on.
Try to take out the battery. Connect the phone to your charger (without battery in it) and wait for the light to go green. Then put back your battery and wait.
If this doesn't work, you can use an external charger.
I had this problem 3 times. This fixed it every time for me.
-christian-

Now my phone won't charge

Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.

Categories

Resources