I have been reading this forum and many others all day about the wifi problems people are having but none are like mine so I would like to ask this question, I turn on wifi and it will not find my network or any network around. I have tried to manually put in the ssid and ip address and still it will not connect that way either. I have checked and double checked all my router setting (currently set to open with no wep or anything) I am begining to wonder if the wifi is broken? My second problem I have found it when I change the connection setting to my isp I cannot connect to the internet. Maybe a bad setting, I am not really sure. Any help would be appreciated. Thanks
is your router set to broadcast the ssid? if not then that is the problem. if this option is not enabled then no one can see your router.
as far as connecting via a cell connection, make sure you are using an operator cab. I am sure if you do a simple search you will be able to find a cab that will load all of the proper setting for a cellular internet connection.
who is your provider?
Yes, my router does bradcast the ssid and I have four computers and printers that find it without anyproblems. When i turn on wi-fi the phone doesn't even search for a network the icon shows up but I don't get the arrow that go back on forth to show that it is searching or connecting.
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
puremc said:
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
Click to expand...
Click to collapse
Search around on the Hermes forum. IE doesn't know to use the WiFi connection when it's available. There's a registry key setting that needs to be changed in order for IE to make use of the WiFi connection rather than going out over your data connection with your carrier.
Related
I have a belkin router. It works well with several laptops.
I can connect to it with my JASJAR and get an IP address.
If I sync pop3 email it uses WIFI and works as expected.
If I sync journal bar it uses WIFI and works as expected.
However if I try to use internet explorer it alway tries to start a GPRS session and refuses to work through WIFI. :evil: Why??
Ive sent hours trying every setting I can find.
Anyone have any suggestions? :?:
Jon
At least your Wifi network doesn't crash as soon as u connect the JJ. Mine doesn't even get that far...
Anyone who can help???
Hmmm I wonder if this is something in the Telstra settings Cab.
Re those having problems all on Telstra?
Might try a hard re set and then manually build the settings.
Jon
Try de activating the phone. this allows you to use IE via your wireless router.
Tried that, thanks.
I just get the "Cannot Connect" message and if I dismiss it. Nothing!
However I can sync the weather without getting the "Cannot Connect" box. SO the WiFi is working, its just that Explorer can see it.
Im running the O2 UK firmware and it works fine (auto gives prefernce to the WiFi if I am in range, try loading on the genuine Imate firmware.
Jon
I know how you feel. I can't get wifi to work. Heck, I can't even use IE when synced to the computer via USB :evil:
Have you tried messing with the settings in start/settings/connections/connections?
I finally got it working.
You have to chose the "Telstra Internet" setting in Network Managment.
Its in Settings, Connections, Advanced, Select Networks, select "Telstra Internet".
I then did, Settings, Connections, Manage existing connections, Modem, and set it to "Auto"
It uses the WiFi first and then only uses GPRS if there is no WiFi.
Hope this helps someone else !
Jon
Can anyone help me with just getting my JJ connected to the wifi network without crashing the router?
Have you tried turning off any encryption etc and re booting the router.
Then try to connect at the most basic level?
Now I'm totally confused
I don't know what is going on!
I have finally managed to use IE via Activesync, using "Telstra Internet" as my My network connects to...
I tried again to hook up to the wifi network. The router is connected to my desktop via a physical cable, and my tablet pC is connected wirelessly (my JJ syncs with the tablet). I turned to tablet off, and then connected the JJ to the desktop wirelessly. On the desktop, I am no longer able to connect to the internet, but for some reason, the JJ is able to connect to the internet :shock:
But, even if I disconnect the JJ from the network, my desktop is unable to connect back to the internet until I reboot the router. What does this all mean????
I have the same issue with my MDA Pro! i done even have the sutp option in the modem settings. I can connect to my belkin router with encryption but no response when in IE!
Anyone else got any other suggestions?
I'm beginning to think that nobody has a solution to such connection problems. Is there any hope on the horizon? Any chance of something being sorted out by MS?
BTW, how well does BT syncing/internet connection work?
Ok frustration rising.
I can connect to my Belkin wireless router with no problems but I can only log onto the router and not browse the internet!
I have checked that the proxy is not configured.
Anyone got any ideas?
Nope
i can connect to a access point, but when i try to open internet explorer n try to go on a site it always says page not found after few seconds
but when i got bak to setting - connections - network card - the phone is still connected
i also tried using WiFiFoFum, which locates the access point, click on connect but nothing happens.
can anyone tell me where am going all wrong?
Are you definitely getting connected to the access point - are you getting an IP address? (Check your wireless lan IP settings in the "settings/communication" program, and look in the "advanced" tab)
yes am definetly connected, cuz i keep chekin on "network card" when it keeps failin to load up n it says connected there and also get the IP address as well, signal strengh is just about 60%
Did you make sure your connection /network card is set to connect to 'the internet' ?
I found that makes a difference on mine...
it always has been set to "the internet"
I have the same problem guys.
It seems like it's looking for a modem connection and does not use the existing WIFI connection. This s*cks. :x
I have the same problem guys.
It seems like it's looking for a modem connection and does not use the existing WIFI connection. This s*cks. :x
Have the same problem
I have the exact same problem, any help very welcome.
easy fix, your going to kick yourself. go into the wifi setting where it shows battery setting efficiency and move the bar to the left for "most efficient". it fixed it on my qtek. let me know if it worked
i manage to keep the connection stable after tweaking the wifi settings to performance boost to max instead of power saving mode..
give it a try...
go to settings, select wireless lan, select the power mode tab, slide slider all the way to best performance instead of best battery.
every webpage loads up after i do that
Connection still not working
Hi, moved the slide to best perfomance.
Still can't ping the gateway.
- The manager shows me connected to the network
- The device has a IP
- I can see the device on the router
but still no connection to the other machines or the Internet.
I'm pretty shure I did a config mistake...
Thanks for help
I had the same problem too. I found the answer a few days later after few tries.
I couldn't find the help here, and I wished someone had the answer. Now that I have the answer I am sharing it with you. It's the real answer.
If you have wireless protection, you'll need to set up the connection correctly with your key and your personal WLAN IP address. Once you've setup your WLAN connection on your Wizard correctly, the Wizard will tell you if you are connected or not. That's the easiest part.
Ok, now when you go to IE on your PDA phone, it might just go to a local webpage stored in your PDA memory. When you try to go to an actual internet address like yahoo.com, you get an error message. In that error message, you'll get an option to be linked to a full explanation from Microsoft on how to setup IE properly. You can screw the explanation, and dump this information away for your WLAN setup.
What you really need is to setup your DNS, and alternative DNS. To do that, you'll need to know your DNS, and alternative DNS. If you don't know it, call your ISP, DSL or Cable company to get those information.
To set it up, you go to CONFIGURE NETWORK ADAPTERS >> SDIO WLAN WIRELESS ADAPTER >> NAME SERVERS.
BTW, the Wifi connection is extremely slow. So don't be surprised to be disappointed after all your work. I mean you won't even bother to use it in the bathroom because you'll be done with it, seriously!!!
Good luck.
I was finally able to go online using the wifi. Where it asks what the network connects to, I had to change it to 'Work' instead of 'The Internet.' The problem is now I can't connect to any internal ip's such as my router or other networked computers. A bubble pops up over the wifi icon on the taskbar telling me I need to change my connection settings. Any ideas how to fix this?
Hi bendog2784!
The internet profile is used together with vpn connection settings and the work is for direct internet connection. The difference is in encryption but access should be the same so perhaps your problem is because of incorrect ip settings.
I have since got it to work. I think a lot of it had to do with the tmobile proxy. Not entirely sure though.
For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.
If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.
Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!
Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!
I am sorry if this turns out to be a stupid/obvious question, but right now I just cannot figure this out! So apologies in advance...
I have a regular data plan associated with my phone, so when I am out and about, I can access the web without problems. At home, the phone will connect either to my own WiFi hotspot (secured) or to my neighbour's (unsecured), and all continues to be well.
Now, while I am at work, I would like the phone to also connect to my office's hotspot, which it does without problems. However, since this connection requires the use of a proxy to connect to the web, I do not get anywhere.
How do I associate the use of a proxy to a specific WiFi profile/connection, and not to the others which are also configured on the phone?
Also, is there a way to tell the phone to give priority to the WiFi connection when available over the 3g connection, or is this done automatically?
TIA!
It's not stupid, there's no separate proxy setting for each Wi-Fi network, just the general "Internet/Work" thingie, but even that wouldn't help because many programs would ignore it (just like it will happen on "big" Windows, by the way - not all programs use IE settings).
So the only workaround I know is to set up your proxy in Opera and turn it on and off manually each time you change networks.
WiFi profiles
Solution is application called WiFi profiles. You can define settings for every wireless network that you use
Thank you very much to both!
I will look into the WiFi Profiles app...