I've been tinkering with my new TMO wing and HATE the TMO dialpad. I used a registry tweak to revert back to the standard dialpad (HKLM\Security\Phone\Skin\Enabled=0).
This dialpad works great except for one thing: The last dialed number partially covers the 'recent calls' list on the dialpad. (see screenshot)
Does anyone know why it does this or how I can correct it?
Thanks!
Ryan
Related
I've seen the Nadavi and Dutty Touch Dual Dialer for Kaiser and absolutely love the Call History skin with the 4 call filter tabs.
I like everything about my original HTC dialpad and do not want to change a thing except adding the tabs for call filtering. (See attached picture)
Does anyone know where I can just get a skin to add the 4 call filtering tabs and not the .cab to change the entire dialpad?
Thank you,
F4F
I posted a question in another thread and got no answers, so here it is in its own:
i've got a stock usTmo tp2. If I disable skin of phone dialer (HKEY_LOCAL_MACHINE / Security / Phone / Skin change the value of 'Enabled' from 1 to 0) creates problems dialing out through contacts/callHistory. Selecting the phone number in contacs/callHistory will not dial out, as if it lost the link to the dialer. searched here for TP2 tf3d dial call proglems, got nothing, even though I suspect is is something simple that I overlooked. I know a flash junkie's answer to any question is to do a hard reset, but I see this question might have a simple solution that I can't figure out.
I like the oem htc dialer, not the Tmo one, and disabling the skin in my tp1 has no problems at all. Tmo tp2 tf3d is version2.1.38165.1 Is there a way to disable the dialer skin and still be able to use contacts?
bump
... bump ...
Any solution to this problem?
I like the clean oem WM dialer (HKLM/Security/Phone/Skin change the value of 'Enabled' from 1 to 0) , but it creates problems dialing out through contacts/callHistory. Disabling TF3D brings back the ability to dial out from CallHistory/Contacts, which is what I want, but the OEM WM dialer by itself still lacks the autosearch function.
again, SEARCH did not find any useful results. is everyone with usTMO TP2 using the stock TMO dialer?
i am havin the same problems.
In WM2003 & 5 dialpad, it was built in that the pushing the directional button goes directly to call history (up), voicemail, speeddial numbers (down)
In WM6 dialer, this functionality is gone. Anyway to get it back?
It is faster to scroll through the call history than to scroll through the phone dialpad. It's also easier & faster to reach speed dial contacts.
Isn't there a way?
I found an old similar post but none of the mentioned ways worked for Iolite WM6.1
http://forum.xda-developers.com/showthread.php?t=298248
Any clues?
engalnoor said:
Isn't there a way?
I found an old similar post but none of the mentioned ways worked for Iolite WM6.1
http://forum.xda-developers.com/showthread.php?t=298248
Any clues?
Click to expand...
Click to collapse
With Advanced Config you can disabe "Phone Skin" - you have the old 2003/WM5 Dialer.
Greetings!
For starters: I have the T-Mobile USA HD2.
I installed the DJC BLACK/BLUE dialer, it caused the extended bar issue in the screen shot. Then, I simply uninstalled the dialer, soft reset... and then the issue was present on the default HTC dialer. Also, some of the black shading remained from the BLACK/BLUE dialer on the default HTC dialer, basically corrupting the standard dialer altogether.
So, then I figured that I'd try to install the WM6.5 version of that dialer -- considering it was reported that it was working on WM6.5 without issues... well, it works in landscape, the colors are correct, and everything seems fine; HOWEVER, as you can see by the screen shot, the overlapped (TALL) bar still branches out from the base of the dialer.
IS THERE A FIX FOR THIS? A REGISTRY EDIT? SOMETHING THAT COULD PERHAPS REMOVE THAT BAR OR MAKE IT STANDARD SIZE AGAIN? DOES ANYONE HAVE THE .CAB FILE FOR THE ORIGINAL HTC DIALER? Thanks in advance...
Hi !
Did you check your registry for the key HKEY_LOCAL_MACHINE\Software\HTC\PhoneCanvas\LargeBtn and check if the value bLargeBtnLayout is 0 or 1 ?
Not sure it has any effect anyway ; I'm trying to remember where its position is defined (it has been a frequent bug on WM6.5.x cooked ROMs - the opposite problem from yours, but still annoying).
The icons names are Dialer_Contact_down.png and Dialer_Contact_up.png, but their design isn't the problem : they're always rather small and the phone software (and/or registry settings) are responsible for their bad centering.
Have been modifying TP2 with many registry changes etc. Running WM6.1
However, seem to have "lost" part of the standard dialer and have trolled through the forums trying to find what files and .dll are being used by the DEFAULT dialler.
The HTC dialler works fine but I do not like it, so when swapping back to the default dialer, the buttons and keys are there, but where the list of previous numbers should be is just a grey area with no entries. Selecting any area WILL bring up the call record as normal.
I must have deleted\edited\corrupted something..........but even looking through back-ups, can not find a clue!
Otherwise, any clues on JUST a plug in dialer (everything I find seems to be a full package with today and other stuff) - I like the dialler on the TYTN2 - both for size and colour and am trying to replicate this if possible.
Colours and size are good for tapping when driving as here in UK must NOT hold a phone as illegal!
ANy clues on files/which registry keys hold the colours for the HTC keypad etc. would be useful as doesn't seem to be HKLM\security\phone\skin
As loads of views and no answers, transferring to general questions
JR44 said:
Have been modifying TP2 with many registry changes etc. Running WM6.1
However, seem to have "lost" part of the standard dialer and have trolled through the forums trying to find what files and .dll are being used by the DEFAULT dialler.
The HTC dialler works fine but I do not like it, so when swapping back to the default dialer, the buttons and keys are there, but where the list of previous numbers should be is just a grey area with no entries. Selecting any area WILL bring up the call record as normal.
I must have deleted\edited\corrupted something..........but even looking through back-ups, can not find a clue!
Otherwise, any clues on JUST a plug in dialer (everything I find seems to be a full package with today and other stuff) - I like the dialler on the TYTN2 - both for size and colour and am trying to replicate this if possible.
Colours and size are good for tapping when driving as here in UK must NOT hold a phone as illegal!
ANy clues on files/which registry keys hold the colours for the HTC keypad etc. would be useful as doesn't seem to be HKLM\security\phone\skin
Click to expand...
Click to collapse