Hi All,
I'd like to use my Hermes as an USB modem for my laptop. I have checked the net and found some articles about it.
But, it says that I have to use wmodem application on my Hermes. At this moment I have a HTC 2.11 ROM on it (I have changed my T-Mobile hungarian, because it was a piece of ****), and I can't found this Wireless Modem application.
Can anyone help me to solve this USB modem issue?
Modem Driver and Manual D838Pro
Thank you very much.
But I need the PPC WModem application, because it is missing from my ROM installation, or maybe I'm so stupid to find this.
can someone post the procedure or software in english for wireless modem for hermes!
thnks
wmodem is here http://forum.xda-developers.com/showthread.php?t=306041&highlight=WMODEM
This is how I do it.
I just connect it through internetsharing.
Disable Active Sync and see that you have a local network to your windows mobile. Just Start webbrowser.
Works great for me.
Hey!
I'm new to all these great programs, so could someone explain to me how to use the WModem, what I can do with it, and what it is for?
Thanks in advance!
Why bother when you can do it much easier with Internet Sharing. Just plug in the USB cable. Starting Internet Sharing and off you go.
Agree, using Internet Sharing is the best & easiest way to go!
o rly?
galaxys said:
Agree, using Internet Sharing is the best & easiest way to go!
Click to expand...
Click to collapse
im using the wm6 rom for htc universal...
tried using the internet sharing as the wireless modem is a bit complicated,
everytime i try it, i turn off activesync and then is says the device is not recognised and nothing happens... im on 3 mobile if it helps...
my friend has a mda vario 3 and his works jus fine on t mobile... any help?
I used the internet sharing in my hermes, but seems there is just one problem that is really irritating. Everytime, after connecting, I have to soft reset the phone because the disconnect button will not respond. The only to disconnect is through the gprs/3g soft bubble icon near the signal strength. After that when I try to start the internet sharing again, it will just not work. Anyone have the same experience?
Binyo said:
Modem Driver and Manual D838Pro
Click to expand...
Click to collapse
I try to use the PDA (WM5) as a modem for Notebook Vista powered, I need a specified driver, and different procedure?
With the driver available in CD OEM I cannot perform the connection....
thanks in advance
Related
hows the conection done? hopefully usb?
what setting / software are needed on the lappy and tytn?
if at all it can be done?
You can do it through USB, Bluetooth or IrDA.
These instructions are for universal, but the same applies for TyTN:
BlueTooth
IrDA
USB
maybe we should put this on the wiki?
yak86 said:
maybe we should put this on the wiki?
Click to expand...
Click to collapse
Wiki updated, I've put it on FAQs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs
DUN
Is there a way to use DUN now that it's been disabled because of Internet Sharing?
New Tyten and Vista
Ok, I've been through the 3 ways to connec as a modem, I actually manged to connect ages ago with XP.
I now have a new Tyten, well new for the states but probably old in the rest of the world.
Anyway the New Tyten has a thing called Internet Sharing instead of wireless modem
None of the old settings are there anymore.
It also has a new way to connect via Blue Tooth Pan.
I've tried the Pan way but I had no luck, the connection seemed to work but I couldn't get on the internet.
I then tried USB, I couldn't get Vista to recognise the Tyten, even when I turned off the active synch, anybody got any ideas????
with Vista and WM6 internet sharing I think its easier than DUN. there is a whole how to in the help program on your hermesjust open the help app and search for internet sharing. just make sure your phone and laptop are connected via bluetooth and then open the internet sharing app and click connect make sure its set to bluetooth PAN. on my laptop I have a little bluetooth icon when its on so I right click that and then connect via persoanl network and then a little pop up pops up and I click on the connect bottun and it connects in about 15 seconds pretty easy! I know for USB you have to open the WMDC connection settings and uncheck allow usb connections.
Thanks
Cheers for that, I'll give it a go, although to be honest I've been trying it all afternoon..
I get the connection but no Internet connection..
Help Still needed
Ok, the plot thickens, I found drivers on the HTC Europe site to connect your Hermes to Vista.
I uninstalled all of the previous active synch hardware and also thre previous modem
When I plug the phone in it doesn't open the new downloads.
Any ideas, I'm running Windows 5.1, is there an official Windows 6 I can update to?
Some help with Macbook
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
elnino132 said:
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
Click to expand...
Click to collapse
Search, then you'll find.
It is ok for me using 10.4.10 with USB via MissingSync.
http://forum.xda-developers.com/showthread.php?t=302977&highlight=MissingSync
this may help...
For anyone having trouble getting their laptop to recognize the 8525 as a modem this may be the solution.
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
my phone was working fine but when I tried to set my wife's up to tether it wouldn't show new hardware found when plugged in and when I tried to manually install the driver the process bix just kinda stalled out and wouldn't go forward with the driver even though I had browsed to the right one. I had to uninstall the driver which was viewing the phone as a serial device. if you're having this trouble then try following te directions in the link above. it worked for me...
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!
Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)
thx i try it but it doesn`t work!
I try on xP and i have the same problem!
BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!
This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps
Hello everyone, Ive searched but come across no help
Im using a Cingular 8525 with the 2.06 firmware and windows vista ultimate. I cant get my computer to connect to it for Dial up networking. My phone allows it to use it (its an option on the phone/laptop when pairing) but it does not connect! It keeps giving me errors. I have tried to enable "Bluetooth DUN instead of USB in the internet sharing app, but nothing changes.
Also, how can I get Windows Mobile Device Center to access my phone via bluetooth? Thank you!!!
can anyone offer assistance? thanks
Anyone at all? This is driving me nuts! I even used two different bluetooth drivers in my vista pc...but still nothing. it works via usb, but not bluetooth. Help???
I got Internet connection sharing working via BT PAN with the new ROM and Vista. Never tried to use it as a modem though.
DirkM said:
I got Internet connection sharing working via BT PAN with the new ROM and Vista. Never tried to use it as a modem though.
Click to expand...
Click to collapse
can you give us your step by step instructions on how to do that?
Id even be ok with getting it to read with a USB cable... After upgrading to WM6, I lost sync support for Vista...
I always take my time before jumping into anything new, On my experience bugs take a while to be sorted out and fixed.
My advice, stick to XP and WM5 for a year at least, then it would be a lot safer to upgrade.
Hi,
Could anybody please tell me how to use my xda exec as modem for laptop?
I have T-mobile web and walk which works fine on Exec and would like to use the same on my laptop.
Thanks in advance.
Jatt
use internet sharing.
untick the usb connection on activesync connection settings.
Hi,
I have unticked the usb connection on activesync connection settings but still its not working. I don't know what else to do for internet sharing.
Can you suggest anything else?
Thanks
jatt said:
Hi,
I have unticked the usb connection on activesync connection settings but still its not working. I don't know what else to do for internet sharing.
Can you suggest anything else?
Thanks
Click to expand...
Click to collapse
You don't say which rom you are using? If you are running WM6 then you have the same problem I have. Internet sharing just refused to see the phone (in my case an XDA Exec - HTC Universal) as a modem. I found help here by searching. There are posts on this in particular complaints that Microsoft pulled Dial Up Networking (DUN) support from WM6 and some later WM5 roms in favour of Interner Sharing . This forum has help on how to reinstall DUN via a reg hack and it worked fine for me. Go search.
If this is indeed your problem, here is the link which worked for me...
http://forum.xda-developers.com/sho...r+WM5+AKU3+/+WM6:+WORKING+at+last!!+A+MUST!!!
xda exec modem driver
hi there,
sorry to jumped in.. but i haven't found any luck trying to find xda exec modem driver so i can make my xda a 3G modem for my pc.
i've misplaced my companion cd , hopefully someone can share me the link to download the modem driver.
Many thanks in advanced,
Govinda
Hi everyone. Does anyone have a mokey's step be step guide to setting up my Touch HD as a modem with vodafone. Instructions for both the phone and my laptop running windows XP with a USB wire connection would be greatly appreciated.
I can connect to the internet wih the phone just cannot set it up as a modem for my laptop - driving me to despair.
Any help would be greatly appreciated - Phone on UK vodafone.
http://wiki.xda-developers.com/inde...-up, Wi-Fi, using as modems, peer-to-peer etc.
here are plenty of guides
Hi
Thanks but no info on my issue there, might seem a rather basic problem for this forum but this is causing me a real headache.
Cheers
I used to use my old HP 6300 as a dial-up modem a few times and when I moved to a Wizard and now a Kaiser I wanted the same ability. You need ModemLink in your ROM (or installed from a .cab file). You also need the HTC USB Modem drivers installed on your PC.
You need to activate ModemLink and then install the drivers onto your PC. You should then have a new COM port and attached to this a HTC USB Modem. You need to change the CSD Line Type to get it to call 'real' analogue lines because by default it is set to v.110, set it to v.32 or v.34.
I have ModemLink (& Internet Sharing) cooked into my ROM and have probably only used ModemLink a couple of times. It does work though.
http://forum.xda-developers.com/showthread.php?t=473875&highlight=modem
Andy
I'm interested too.
I hate ICS because I can't remotely control my device.
Also, it's simple to get automatical internet connection if device is used as modem.
Nokia in this is really better imho.
Bisis said:
I'm interested too.
I hate ICS because I can't remotely control my device.
Also, it's simple to get automatical internet connection if device is used as modem.
Nokia in this is really better imho.
Click to expand...
Click to collapse
Haven't I just told you it does work with ModemLink and posted a link to how to get it working
Andy
ADB100 said:
Haven't I just told you it does work with ModemLink and posted a link to how to get it working
Andy
Click to expand...
Click to collapse
Really? I'm sorry but I can't remember.
However I tried just yesterday ModemLink app but it can't work on my touch hd. When I start the app it doesn't anything. I tried also WirelessModem where I can choose to use USB interface but WXP can't recognize the device as a usb modem. I tried anything but with no results.
Please can you update me?
So do you really want to use it as a modem, or do you want internet sharing? You used the word "modem," but from your description, it sounds like you really want to share the internet connection of your phone with your computer. Or do you actually have an ISP or some other service that you want to call? There is no internet sharing app on the touch HD? Try ICS Control maybe?
http://forum.xda-developers.com/showthread.php?t=377047
I really like to use my device as modem.
I'd like to go to Network Connection in WinXP and double click on a network link and push on "connect" button, compose *99# and go to surf the web.
Bisis said:
I really like to use my device as modem.
I'd like to go to Network Connection in WinXP and double click on a network link and push on "connect" button, compose *99# and go to surf the web.
Click to expand...
Click to collapse
Does it have wireless? If you use ICS control, and use the wireless to share the intenret, you can use active sync on the usb connection for remote control.
Rudegar said:
http://wiki.xda-developers.com/inde...-up, Wi-Fi, using as modems, peer-to-peer etc.
here are plenty of guides
Click to expand...
Click to collapse
Hi Rudegear, your link points to sort of nowhere?