wireless problem - Wing, P4350 General

hi all
been using HTC P4350 for few months now, i cant get wireless, when i turn it on it doesnt detect my SE555 router, is thwere some workaround, or some option, ive tried setting it up in connection tab so far no success
it picks up near by wireless networks but only one or two and my laptop detects 5 networks at the same time.how did you set network or wireless on your herald?

try updating the rom. I updated and it improved my wireless signal strength

m_mario said:
hi all
been using HTC P4350 for few months now, i cant get wireless, when i turn it on it doesnt detect my SE555 router, is thwere some workaround, or some option, ive tried setting it up in connection tab so far no success
it picks up near by wireless networks but only one or two and my laptop detects 5 networks at the same time.how did you set network or wireless on your herald?
Click to expand...
Click to collapse
I had the same problem (at least what your description tells me ) I just pulled out the power cable from the router, and put it back after a minute or so.. problem solved really easy, hope that you have the same

Related

TyTN wireless problems

Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....

Wifi router working for anyone?

I have a vodafone uk hd2 and have been really impressed with it as a product. I have not had any luck with the supplied wifi router software, I go through the minimal setup and press start and as far as the phone is concerned the router is up and running, the problem i have is that neither of my laptops can see the router.
Has anyone had any luck using it? Is it possible that vodafone have disabled it somehow?
Alternatively so i can manually add the router does anyone have the following details that would be setup automatically;
wep in use? is it 128 pass phrase or 40/128 key?
open system authentication or shared key?
im guessing the wep index would be 1?
Thanks
Search .. it was discussed 10 times already.
Thats as maybe but none of the several threads have a real answer as to why some people have it working and others dont. It also seems that the functionality can be effected by soft reset which isnt ideal at all. Also i havent been able to find any of the above original settings that i asked for in the threads hence the post.
Works for me
Hi,
works great for me - just have to make sure that you're not connected to WLAN with the HD2 when trying. Disabling WLAN, then starting WIFI-Router does the trick for me.
Good luck !
I am on vodafone and wifi router works perfectly for me. It worked when I had the stock 1.43 rom and it works with all the cooked roms I have used since.
i did notice it only works with 802.11g not with 802.11b devices like PSP or some other phones..
Is that really the case that it only works with 802.11g devices? Im fairly sure my netbook isnt new enough to have 802.11g and as such probably wont see the router. Has anyone found a way to get the router visible to 802.11b devices?
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Just to add on my previous post , I tried using WMWIFIRouter , also come back to same result ....
pagoda123 said:
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Click to expand...
Click to collapse
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
N Works
bel_z_bub said:
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
Click to expand...
Click to collapse
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Any chance it's the computer you are trying to connect with? Tried with my work computer, but couldn't because our Dells have computer to computer(adhoc) connections locked out for security. Does the wifi router function show up as adhoc or access point?
zSpinner said:
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Click to expand...
Click to collapse
ok, now try and get N speed with only one antenna...
Ok Ive got a similar problem with the wifi router and vodafone
everything works hunky dory wifi router turns on, computer connects all is good only when i try and access a website i get a http error 403 forbidden message as if voda have restricted access i have no idea how this would be possible though.
Ive tried many site same result and many browsers chrome, safari, ie, firefox and opera
same thing
the strange part is that tweetdeck and skype work while the browsers don't
HHMMM
anyone else experienced this problem
As I'm on O2 I was quite keen to flash a new ROM to get the wifi router working as they did the dirty on us by ripping it out of the 1.43 they shipped it with...suffice to say that I'm not overly impressed with it after the couple of trials I've made using 1.66 ROM as the speeds its capable of generally fall short of what you get if you simply connect it via usb and use data sharing..bear in mind that I've only tried it twice so far and as such I may refine my opinion with further trials in different locations but as I was hoping to avoid repeatedly connecting leads to the usb socket it's a bit of a blow sooner or later, wear and tear will be an issue to think about.
my findings
had a play with the router, just to see and initially thought it wasn't working.it connected, but wouldn't pass any data.
25 minutes of my best network technician skillz later still no joy... that is until I remembered the laptop has a fixed ip and default dns server address set. as soon as I set them to automatic, bingo, fully working.
did a speed test from the laptop (mobilespeedtest.com) and got just under 900kbit over 3g. winner!
The connection only shows as 802.11b, but that's fast enough for the 3g connection so no worries.
the only down side is that it's adhoc, so the wifes n95 doesn't see it..but then again thats possibly a blessing In disguise!
EDIT as mentioned by the poster below, I had three connections present, (wap.o2.co.uk, mobile.o2.co.uk and paymonthly.o2.co.uk) and the router wouldn't work on them all, though I forget now which it would and which it wouldn't.
I never tried with 1.43 O2 ROM, but after flashing to 1.66 stock rom I just tried this.
For some reason I have 3 internet connection options:
1) Pay monthly contract
2) o2 active
3) mobile web
My standard connection is "mobile web" so I tried this first, and my laptop couldnt see the HD2 as a WIFI router. I then tried the "pay monthly contract" option and it worked straight away.
Now under my Notifications screen under O2 3G UK, I have two connections running, and the download speeds running the same as my home broadband due to the HSPA connectivity available through the phone.
Anyway, I just thought I would share this with anyone it may help.

[Q] WiFi problems and questions

My WiFi on the Atrix crashed all my 3 routers (ActionTec/Dlink/Linksys), sometimes after a few minutes, sometimes after several hours.
The routers needed restart after that. Also wired connections were affected.
I tried messing with static IPs and sleep mode, nothing worked!
Now I upgraded my Dlink DIR 655 from 1.11 to 1.33 (supposedly the best).
Things changed
Now my Atrix takes only itself down, the Dlink keeps working for other wireless and wired devices.
The Atrix says its connected and I get the icon with full bars, however no data is transferred. The market and other apps say network error.
I can switch connection over to my other WIfi network and all is good again.
Has anyone seen this behaviour?
Also is there an app that shows me the link mode G or N and the current link speed? I cant seem to find a good app. I would also like to see if I can lock the Atrix to G or N only. Is there such a toggle switch?
Thanks.
Update: Switched connection from Dlink to Linksys and it worked for about 30 minutes then the linkksys crashed (could not reconnect got no IP). Switched back to the Dlink, got connected, good signal but no data. Even after a phone reboot. So I think it might be still on the DLink side although I have Netflix (PS3 wireless) and another PC connecting fine. This and the VOIP mic problems (Skype etc...) bug me the most about the phone.
ive been having this same problem since i got my phone and im still having problems. its pissing me off. cant even use my netflix through the Wii to watch on the big screen
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
gnahc79 said:
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
Click to expand...
Click to collapse
centurylink is my isp. i dont know if its my router that is just crappy or my cell phone is interrupting it while the wifi is on and im trying to browse causing the routers wifi to cut everything off thats on wifi

G2 Verizon - Wifi Won't Connect

Has anyone had any issues connecting to Wifi networks on their G2s? I got the verizon version on Saturday and haven't been able to get the phone working on 2 different wifi networks. I can connect to the wifi network just fine, but I can't access the internet at all. I can confirm that other devices are able to connect no problem.
Curious if anyone has some thoughts on how to potentially fix this. If not, will be heading back to Verizon to get a new one. Thanks in advance for the help.
Re:No wifi Connect
au6768 said:
Has anyone had any issues connecting to Wifi networks on their G2s? I got the verizon version on Saturday and haven't been able to get the phone working on 2 different wifi networks. I can connect to the wifi network just fine, but I can't access the internet at all. I can confirm that other devices are able to connect no problem.
Curious if anyone has some thoughts on how to potentially fix this. If not, will be heading back to Verizon to get a new one. Thanks in advance for the help.
Click to expand...
Click to collapse
I have the AT&T G2 version , it will connect to any wireless router but the connection will last 5 seconds then no internet, this is totally unacceptable I upgraded from the G-Pro and may go back as that never had this issue, I did read LG had a similar problem with the Nexus 4 and Optimus G
Mine works fine. I have a VZW G2 and an ATT G2 connected on the same router. It connects to both G and N networks.
No issues with my Verizon G2.
au6768 said:
Has anyone had any issues connecting to Wifi networks on their G2s? I got the verizon version on Saturday and haven't been able to get the phone working on 2 different wifi networks. I can connect to the wifi network just fine, but I can't access the internet at all. I can confirm that other devices are able to connect no problem.
Curious if anyone has some thoughts on how to potentially fix this. If not, will be heading back to Verizon to get a new one. Thanks in advance for the help.
Click to expand...
Click to collapse
Did you try rebooting your router? I see this at home with the families iOS devices a lot, especially after heavy data traffic. I'll turn off the router for a couple hours or overnight and the next day all is well. Router is open, no encryption.
au6768 said:
Has anyone had any issues connecting to Wifi networks on their G2s? I got the verizon version on Saturday and haven't been able to get the phone working on 2 different wifi networks. I can connect to the wifi network just fine, but I can't access the internet at all. I can confirm that other devices are able to connect no problem.
Curious if anyone has some thoughts on how to potentially fix this. If not, will be heading back to Verizon to get a new one. Thanks in advance for the help.
Click to expand...
Click to collapse
I have the exact same problem. It will sometimes transfer some data using browsers, but nothing on facebook, pandora, or the play store it will say connection lost or not data connection.
My wife has the same phone and it works no problem and also the laptop. Must be a dud wifi radio or something like that. Mine is going back to the store tomorrow.
au6768 said:
Has anyone had any issues connecting to Wifi networks on their G2s? I got the verizon version on Saturday and haven't been able to get the phone working on 2 different wifi networks. I can connect to the wifi network just fine, but I can't access the internet at all. I can confirm that other devices are able to connect no problem.
Curious if anyone has some thoughts on how to potentially fix this. If not, will be heading back to Verizon to get a new one. Thanks in advance for the help.
Click to expand...
Click to collapse
Are you trying to use adblock by any chance? I was and it was causing the same issue you have. I uninstalled it and changed my proxy settings back to none and wifi is working great now.
Just received my LG G2 White brand new from T-Mobile about 2 hours ago. After many attempts to troubleshoot the issue it all failed. The problem is Wifi will connect to router and even work but after 30 seconds the connection goes down. The actual Wifi signal shows connected but no internet it gets stock. We tried resetting the phone and toggling with different features but still it did the same thing. T-Mobile is the worst they were trying to have me ship the phone back and leave me phone less for days. I complained and they are sending another one overnight but have charged me for the phone on my account. Mind you I've had months of bad service, after all I think I got a defective phone. I've read some other people having the same issue with other carriers. If I get another one with the same issue I'm jumping boat. If anyone knows of a work around let me know. I tried 2 different routers same issues connects then it randomly disconnects and stops downloading or transferring data.
Reset Phone - didn't work
Turned off mobile data - didn't work
Turned off wifi sleep - didn't work
I'm on Verizon. I have trouble with initial connection to wi-fi. It says obtaining IP address for a very long time. Even if I have a very strong signal. It takes about five minutes. It eventually connects and works fine. Then next time I try to connect to that router it works fine. It's only the first time I try to connect to a new router.
I just got this phone over the weekend and I was also having trouble connecting to my home wifi.
It would stay connected for 30 seconds or a couple of minutes then disconnect however the entire time the status under the Wi-Fi settings page says Connected even though I couldn't access the internet or the admin page of the router. Frustrating. If I turned off the mobile data, the wifi, the phone, the router, or some other unknown combination of events it would then reconnect again for another 30 seconds to a couple of minutes.
I called Verizon, they told me to take the phone back since I was within my 14 days. I did this and was optimistic. Then the new phone immediately experienced the same issue.
I did some more research, changed my router from 20 mhz channel width to auto 20/40 mhz. Not sure why it was set to just 20. I thought that would fix it. Nope.
I tried to set my phone to use a static IP, that didn't work either.
Then last night I tried the WPS Push Button option instead of using a password. This method worked and my phone stayed connected. I haven't had a chance to repeat my steps to verify it works again but wondering how other people are connecting, password, wps push button, wps pin? WPS is not my preferred option due to the security risks but just trying to track down what works and what doesn't.
I am able to connect at work just fine using a password.
I'm having a similar problem - my work network has no problem connecting while my home network almost never works with this phone (~25% of the time, other devices have no problem). Occasionally, resetting the phone or just turning on-and-off WiFi fixes the problem, but more often I just give up and use 4G. Anyway, if anyone finds a solution, please post! This is such a standard feature that should really work out of the box.
In case it helps, my home network uses "WPA/WPA2 PSK" security and my work connects to "802.1x EAP" security - also I'm not adverse to changing the security options if it fixes the problem.
Thanks! Nick
After reading more on this, I've decided this issue is router related not phone related.
I discovered my router reached end of life in April of this year is no longer receiving firmware updates. Newer versions of my router have received multiple updates since then.
I will be buying a new router. I report back on if it works.
I really don't think it is "router related" as all my other devices work as expected with my router. A new router may fix the problem, but I'm pretty sure the phone's WiFi is buggy and not the router..
Sent from my VS980 4G using XDA Premium 4 mobile app
In my situation it really appears to be how my router is handling the connection when I connect with a password since I can connect with limited security.
Does your router have a firmware update available for it? If so, have you applied it?
Received my new to me router yesterday with updated firmware as of 10/7/13.
My phone was connected for a few hours last night and I have not had any problems today. I'll report back if I start experiencing any issues but getting rid of my old, end of life router and replacing it with a newer router worked for me.
I did not buy a brand new router either. I went with a cradlepoint mbr95 which has been on the market for awhile and has already had a few firmware updates.
Check you wireless security settings
Had a similar issue to this and it seemingly was resolved when I moved the wireless router security over from WPA/WPA2 personal to WPA2 personal only. The phone found the WAP and connected right away. I tried to reproduce the behavior but alas I have not been able to do so. Perhaps this will help others.
hi guys
i found the problem
it happens just when you disable auto update in "settings>general>about phone>update center>software update>check automatically"

[Q] wifi problem

Me and my girlfriend have now been thru 4 brand new lg g2s in the past three weeks and can't get the wifi to work.it will find and connect to any network and work for about 2 min and then stop loading pages.this is not only on one network it is all wifi networks.We thought it might be faulty phones but we both traded in for new ones.We can't figure out the problem and have talked to everyone possible and searched the web for answers and have found no answers.please help us
Schurek16 said:
Me and my girlfriend have now been thru 4 brand new lg g2s in the past three weeks and can't get the wifi to work.it will find and connect to any network and work for about 2 min and then stop loading pages.this is not only on one network it is all wifi networks.We thought it might be faulty phones but we both traded in for new ones.We can't figure out the problem and have talked to everyone possible and searched the web for answers and have found no answers.please help us
Click to expand...
Click to collapse
It's your router, not your phone(s). Can't believe you haven't considered the common factor.
There's nothing wrong with the WiFi on these phones. Hence you can't find answers to problems that don't exist...
​
Schurek16 said:
Me and my girlfriend have now been thru 4 brand new lg g2s in the past three weeks and can't get the wifi to work.it will find and connect to any network and work for about 2 min and then stop loading pages.this is not only on one network it is all wifi networks.We thought it might be faulty phones but we both traded in for new ones.We can't figure out the problem and have talked to everyone possible and searched the web for answers and have found no answers.please help us
Click to expand...
Click to collapse
I have no problem with wifi whenever I change new mobile phone . In your case you can try resetting your router.
I have reset the router and like I said in my earlier post, the problem was not just in my house with my wifi, its every wifi we have tried in different places all over
There isn't nearly enough data here to make any sort of assessment.
-Have you tested your connection settings from the phone? Try something like Speed Test to see if it can establish a connection.
-Does Wi-Fi stay connected or does it drop in and out? Does the Wi-Fi icon change to being grayed out? Does it turn itself off under your settings?
-Have you tried changing the connection type on the router? WPA2 to WEP, etc...
-Have you verified that the network is broadcasting an Internet connection from another device?
-Can you see the phone on your network from a computer?
-Have you tried pinging an IP address from your phone?
More than likely it's a DNS or DHCP issue. But I don't want to recommend any troubleshooting methods until the problem has been isolated.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM 4.3.
Every device in the house works fine on the network. I play xbox live all the time with no problems.No lagging whatsoever.the phones will connect to the network and look like it's always connected to the network but will not load any pages or any thing.one off the network, it works fine.thus is the only device that has ever not worked in my network
Schurek16 said:
Every device in the house works fine on the network. I play xbox live all the time with no problems.No lagging whatsoever.the phones will connect to the network and look like it's always connected to the network but will not load any pages or any thing.one off the network, it works fine.thus is the only device that has ever not worked in my network
Click to expand...
Click to collapse
I have the same issue. I have had the phone for a month with no issues. The last couple of days, I can't stay connected to any wifi either. It has happened on multiple routers in multiple locations.
I have updated my router firmware (although it happens on all wifi routers). I get a connection, then it disconnects, finds the wifi again, and reconnects...over and over again.
Something is up.
Did a factory reset...wiped everything to start over again...didn't help.

Categories

Resources