Bluetooth headset problem - iPAQ rw6828, XDA Atom General

I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?

Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.

hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.

Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013

"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.

thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.

Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.

Related

MP3 via BlueTooth

I need to listen to MP3s throught the bluetooth headset.
I don't need a good sound quality - it's just for speech.
I just want to play that MP3 continuously (again and again) so I'd be able to put on paper as much as possible.
So is there a way to play a MP3 (or any other sound format) using the BT headset?
i think it require a bluetooth profile which the xda2 dont currently support
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
MP3s through Bluetooth
I have a Plantronics M3000 headset when I bonded it with my XDA II I selected the option for the headset profile from BT Tools. When I switch on the headset mode from the Today Screen I get a bleep on the headset but no audio is transferred to the headset it still comes out of the speaker. Do I need to tweak any other settings?
Im guessing that the Plantronics is not fully compatable with the headset profile.
Thanks for any help.
Paul
Rudegar said:
i think it require a bluetooth profile which the xda2 dont currently support
Click to expand...
Click to collapse
OK. Where can I get the required BT profile? Does the Widcomm driver have it?
It normally works on my PC - I can listen to all sounds form PC throught the BT dongle and BT headset. So it's just a question of driver. Where can I get it for my XDA2?
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
Can u provide more details please? I couldn't find your mentioned headset from Ebay.co.uk
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
how does it handle music ?
i mean does it play one channel of the stereo
or does it play joind mono ?
to me listening to music with 1 ear is pretty useless
can you please also elaborate which rom version ? pocket BT tools installed or not? which BT stack?
the headset and handsfree profile are supported by MOST BT headsets
my jabra 250 suppprts both profiles, but I am never able to channel windows media output through the BT headset ((
so any info would be very insghtful
captin said:
This ie the companies web site - http://www.south-wing.com/
When I was setting up the pairing on my XDAII it recognised the earpiece as having the headset protocol and asked if i wanted to connect using the headset profile or the handsfree profile, I chose the headset one. It still works perfectly as a handsfree earpiece but also allows me to listen to anything played with the windows media player, which i use for MP3's.
It also works with a PC using a bluetooth dongle, I use it as a handsfree phone for my home phone.
Click to expand...
Click to collapse
Hi captin,
I had a look on the website. It didn't mention that the handsfree can support xda2. Also, there's no info at all that it can be used to listen mp3.
Can u show us more how you do it?
Thanks
mp3
ok friend to use your headset with xda2 to lesson to mp3 you need widcomstck you can find in our fourm and kai blutooth headset batch you can buy from handango in 3 dollars and you can give to our fourms instool both and make pairing with your headset and thats work fine but only mono beacuse we need blutooth headset streo and in the market only mono thanks
captin said:
I use a SouthWing BT headset, bought on Ebay.co.uk for around £35.
It supports both the BT handsfree and headset profile, which the XDA2 supports too.
I can listen to MP3's or use it to take or make calls. You should be able to use any BT headset that supports the headset profile, most only support the handsfree mode.
Click to expand...
Click to collapse
I think you must be the only person on the planet that has mp3 working through bluetooth without any patches/hacks/etc, can you please elaborate more because it doesnt work for anybody else.
I am using a Plantronics M1000 (M1500) with iMate 1.52.00WWE.
With Pocket Bluetooth Tools I can use it for Phone calls but not MP3.
Annoyances are -
1. I can't initiate dialling from teh Headset unless I dial from the phone and then hangup (even if BT permanently on).
2. If I leave BT permanently on the Headset battery goes flat very quickly in standby.
3. If a Call comes in on Call Waiting, the call transfers to the phone and I can't get it back to the Headset
Mike Sydney
Any more news on this? The world waits...
Bluetooth/XDA 11 Integration
Hi Guys,
Just thought I would let you know that New Answer Ltd have done bespoke integration work into Bluetooth headsets. For the application that you are talking about, it is possible to develop an app to run MP audio apps to any bluetooth headset. get intouch with [email protected]
Dan
Yesterday, I tried w/ Kai's Bluetooth Headset patch
I've found that it doesn't work with XDAII.
So, I'm still waiting for the new patch.
Besides, does anyone know what Tobias, Pocket Tools developer, is doing?
I've sent emails to him serveral timee But there is no reply. His website also stop progressing as well.
Headset Profile
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Re: Headset Profile
mlee2 said:
So, the XDA 2 does not have the profile that allows MP3's to be played through a headset. But does anyone know a profile that allows voice dialing from the headset? South-Wing has voice dialing from the headset but captin is the only person i know who has it working on the XDA 2. Anyone got any suggestions?
Michael
Click to expand...
Click to collapse
Unfortunately, it's not as simple as just a profile. Since a third party voice dialing software has to be manually added to the XDA II (its not built in), the headset would have no way of knowing which application to "activate" when the headset button was pressed. The only way I see this happening is, if someone can hack the bluetooth stack to detect a headset button press, then route the command to a voice dial software installed on the XDA II. Ideally, the dll would have an interface that would allow you to select the application you want executed when the bluetooth headset button is pressed.
Rumor has it that the iPaq 6300 won't have voice activated dialing either - and it will have the best bluetooth software stack around, the Widcomm stack. If it won't support it, I wouldn't have much hope for the XDA II unless some hacker decides to give it a try. But it sounds like a lot of work.
Reply from South Wing
I sent a email to South Wing about compatibility with the XDA 2 and i got this reply
The XDA II does not support the Bluetooth hands-free profile which is used by the NeoVoice USB headset and gives access to the various hands-free mode features of the device.
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Overall, without the hands-free mode capability, the features you would miss on are only the following ones: rejecting a call, transferring a call to the phone, last number redialing and disconnecting from the phone.
The headset is available online from expansys.com (type NeoVoice in the search box) where you may acquire the USB cable and car charger for little more.
There you have it from the horses mouth, hope this is some help
Michael
Re: Reply from South Wing
mlee2 said:
However, it supports the headset profile also supported by the NeoVoice USB. This means you can make and receive calls perfectly and use functions of the headset like voice dialing.
Click to expand...
Click to collapse
Hmmm. Interesting. But I still don't see how voice dialing can be supported through the headset. Again, the XDA II has no built in voice dialing software, so there's nothing to standardize on. Therefore, your only option is a third party dialing app. So, if you were to install something like Microsoft's Voice Dial, the headset would have no way of knowing that it needs to call the Microsoft Voice Dial EXE when you press the headset button. Other bluetooth phones that do support voice dial can use headsets that, when you press the headset button, can call standard API's that initiate the voice dialing capability on the phone. The XDA II does not have this standard API set.
Anyway, I'm still more interested in pushing standard sound like MP3's and audio books through the BT headset. But the voice dialing stuff is interesting nonetheless.

Piping sound output to bluetooth headset?

I am not entirely sure if this is possible but I want to make my bluetooth headset my headphone as well (instead of plugging in the wired handsfree which I got with my unit). The purpose? mostly to use SKYPE for LD calls - skype does not seem to have an option to send to BT headset. (I also want to listen to music on my BT handsfree but that it another issue - less important)
Any ideas?
You cannot listen sound over BT. Only phone calls can be routed to headset.
this isnt actually true, i managed to get all sound to run over my BT headset on my alpine the other day and was able to listen to mp3s over my jabra 250v but as of yet i cant work out how i did it, thats how i stumbled accross this thread

Bluetooth Challenge

I have an Imate JasJar and a KJam. I love both of them especially since I was able to install A2DP on both devices thanks to the wonderful people here. One of the things I love is being able to sit and watch my home theater with wireless headphones thanks to my ITech bluetooth dongle and my ITech Clip S35. The phone rings and my headset mutes the volume, I take the call, and the volume automatically comes back up. Life is good. I just bought the Nokia 12w bluetooth headset. FM radio, A2DP, AVRCP and headset profiles. A beautiful design with a caller ID window no less. You would think I would be in heaven right? But Nokia crippled this great little accessory. You can only get the non-headset profiles if it comes from the same device that is delivering the headset profile. I am able to connect to my PC, pair it and connect to an AV profile, but no sound ever comes out. Now before I got this headset I had a Diva Gem MP3 player. This thing is great. FM, MP3 player, voice recorder, bluetooth headset profile AND it even took SD cards for file and MP3 usage. I have had a 2GB card in it and really enjoyed it. But the allure of being able to listen to music from my Universal or watch a movie in the waiting room and listen wirelessly was too attractive.
Here is my challenge:
1. Is there anybody here who can add the A2DP profile and the AVRCP profile to the Diva Gem?
OR
2. Is there somebody who can break the limitation on the Nokia 12W that precludes it from being able to accept an A2DP proile and use an AVRCP profile from a "foriegn" device?
I am willing to bet that there are others who would like to be able to do this with the 12W.
Thanks for any advice.
The Edge
while on the subject......
hi,
i am a newb, with a k-jam, and a bt headset.
could u plz tell em how to connect the bluetooth headset to the k-jam, as the Loooooooooong cable on the stereo headset provided is getting on my nerves....?
Re: while on the subject......
MoGuL said:
hi,
i am a newb, with a k-jam, and a bt headset.
could u plz tell em how to connect the bluetooth headset to the k-jam, as the Loooooooooong cable on the stereo headset provided is getting on my nerves....?
Click to expand...
Click to collapse
Put your headset in pairing mode. Go to the Comm Manager on the KJam. Hit MENU on the bottom right hand side. Choose BLUETOOTH SETTINGS. Choose DEVICES. Now choose NEW PARTERSHIP. Both devices should discover each other and you should be prompted for the security code. Most devices use "0000".

Atom's Bluetooth Functionalities

I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Anyone, please?
I use the iTech S35 and STEREO works like a charm with the Atom. I get stereo mp3 and movies. The handsfree works too although the voice dial doesn't cos the long press to activate the voice dial uses the button to turn the iTech on and off so u will end up turning the iTech off.
not heard of the iTech powBOX so dun know how it compares but I assume it should work too.
i think it used to work in older ROM version... could it be the new ROM?
I use Samsung Bluetooth SBH100 as a stereo headset with Atom (latest ROM) - got no problems. Headset's remote control buttons for audio player works too. Short press of Phone button make a redial. 4 sec press should activate voice dail (on 'supported devices'), but make nothing (common problem).
can the SBH100 play radio?
touraco said:
can the SBH100 play radio?
Click to expand...
Click to collapse
Don't think so as Atom requires the ear piece to be plugin as antenna...
I am using Bluetake Iphono BT stereo headset on Atom. It can listen to the music and act as handsfree for calls seperately but couldn't do both at the same time, the headset will switch off whenever there is incoming call while playing music, i guess there's some problem on switching btw.
Anyone got the same problem??
can't listen to music but can make calls
Hi,
I'm kind of new here, as I just bought a used atom from that e*** auction site. it works great, except i can't get my bluetooth headset to work as a headphone while listening to podcast, mp3's, etc. using my BT headset to make calls works fine. I have both a Jabra BT130 and BT350 and both have this problem. is it the headset? if so, is there a list somewhere that lists what BT headset is compatible? i really need it to work as I cannot stand using wired headsets since by the time i untangle those wires, I'm out of time already...
thanks a lot!
It's the New Rom..(i think)
Knightro said:
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Click to expand...
Click to collapse
the problem comes with the new rom i think.. i had a bluetooth headset that worked perfectly before i uograded to the new Roms released by O2 itself.. i emailed them about the problem but they insist that nothing is wrong with the ROMs they made...

audio on phone n headset application

I would want/need an application w/c has a profile capability that will allow audios(call, microphone, mp3) to be redirected to both the wired earphone and at the same time spearphone or the phone itself, while the wired earphone is still plugged in. The audio needs to come out or the sound should come out on both the wired earphone and phone or speakerphone. I need this while driving and my wife needs to hear the message from the party being called or called upon. Or if I'm listening to a good music on my wired headset only, but later on would like to share it to everybody while driving again. I need to be able to toggle it easily. I've seen phoneweaver and phonealarm but these two does not fit the need describe above. If there is none existing, can somebody create this very simple app for my need? I'm willing to donate if ever. Btw, my unit is an O2 Xda Atom and I got this idea from the build in FM radio build in application that has this button w/c allows audio on both wired headset and phone. It does not work on calls and turning the radio always on drains the battery. And the wired headset acts as the antenna. Thanks in advance.

Categories

Resources