Power management problems/disillusions - P3600 General

I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 1:
The power settings are: backlight off after 30 sec. power off after 1 min. (on battery power). After 30 sec. the backlight dims to the lowest setting but the device does not switch off after 1 min (or any time for that matter). This is a huge drain on the battery! I can switch off the device with the power button but once it turns on again (e.g. while receiving an SMS or email) it stays on with the dimmed backlight.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
My guess is that both problems may have simple solutions so I’m asking you all to help me with this.
Thanks in advance,
Stefan

niobium said:
I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
Click to expand...
Click to collapse
Well for problem 2 you haven't searched enough! Anyway you should not use the power button; go to the Windows Media player settings and map the "Toggle screen" function to a hardware button. Then toggle the screen off when you play music.
Regarding your other problem: what software have you installed? Have you got this problem on a freshly upgraded phone?

The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Problem 1 after fresh ROM update but right after that I installed TomTom 6.
I might try a new ROM update and check but rather as last resort...

niobium said:
The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Click to expand...
Click to collapse
It works for the Trinity too. You can also assign other functions to buttons if you keep them pressed. Toggle screen is assigned to "Hold Down" in my case. So if I press down once I decrease the volume, if I keep pressed I toggle the screen.

As to your first problem; i'm having the same problem too...
To narrow it down a bit; my device turns off (to standby) just like it should when i just briefly check the time or something and then put it away with the todayscreen on (so with no aplications running except some today-plugins ofcourse). However; it DOESN'T go back to sleep when the system has given any sort of notification, like a missed call or a received text-message or reminder for a calendar-item.
So my best guess is that it has something to do with the databases notification que (where WM2003/CE 4 had the problem of overflowing this notification que).
It's really anonying the hell out of me too, cause it really drains the battery fast if you don't discover it soon enough...
As for problem 2; map the screen-toggle to pressing the silver 'enter'button.....that workd great for me. By the way; i'm tinking about getting the new wired media remote control HTC is releasing shortly (check this link). I wonder if these buttons will be mappable.....
Edit: just as i posted this, i received a text message and this time it nicely turned back to standby (ie turned of) state when i didn't check it right away. I did however soft-reset last night before going to sleep. So i really do think it must be in the notification que somewhere, as PocketPlus will still clear that everytime i soft reset. Anyone having the same problem exactly as described ?

Well I found my phone again on after I received an SMS and this made me decide to completely reinstall the original ROM (including the GPS).
Step by step I installed all the applications (and tested the device in between: I started some programs and got some notification).
So far the result is that it all works fine now.
The difference might be the different ROM (from smartmobility.nl in stead of europe.htc.com although the version is exactly the same).
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…

niobium said:
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…
Click to expand...
Click to collapse
Hmmmm....i do the screen-toggle everytime i use it as a musicplayer, and i get considerable good batterylife....
However, i'm not using the BT headset anymore cause the volume was too dim...i'm using the 3,5mm adapterplug now. But batterylife with bluetooth was about the same when i used it.

After all the work yesterday, this morning the problem with not going to standby occured again!
But now I know more. It happened only after I added some sites to my RSS feedreader.
I use pRSSreader from David Andrs (http://pda.jasnapaka.com/prssr/)
Using the 'update settings' with 'automatically connect' the program tries to create a notification on the today screen if new messages arive.
This notification process is the problem. If I switch it of and soft-reset, the device works fine again.
I will mention this problem to David Andrs...
I hope this will help you as well.

Related

Playing music on JasJam in sleep / standby mode

When i had my Wizard (k-jam) i would use TCPMP to play music through my Bluetake iPhono Mini Bluetooth Headphones. When i pressed the power button to enter standby mode the music would continue to play.
Now i have my nice new JasJam, i try to do the same however as soon as i press the power button it seems to enter a deep standby mode and the music stops.
When playing music i now have to remember to lock it everytime i put it in the belt holder or my pocket to stop opening applications and as the backlight keeps turning on it chews through the battery life.
So does anyone know of a way to keep music playing while in standby? Is this a hardware limitation of the Hermes?
Cheers
I am running the Imate Telstra (AUS) 1.3.1 ROM
Puckster said:
So does anyone know of a way to keep music playing while in standby?
Click to expand...
Click to collapse
I use mortplayer, this is one of it's many features
Thanks pof, i'll give it a go.
I'm still curious why this worked with TCPMP / WMP on a rom with same AKU (2.3) on Wizard but will not work on the Hermes. Sometimes i think HTC must be half asleep when looking at certain aspects of new devices..
Never had a wizard, but the BlueAngel had the same problem as the Hermes has...
wmp and spbpocketplus have this feature
if you assign a button to this in wmp, you can use 'screen toggle' and it both turns off the display and locks buttons except the dpad. I use this daily to play music. played for 5 hours today and down to 90%.
(i was on gprs at the time)
spbpocketplus also has a screen toggle function that you could use. it does exactly the same thing.
wwwes said:
if you assign a button to this in wmp, you can use 'screen toggle' and it both turns off the display and locks buttons except the dpad. I use this daily to play music. played for 5 hours today and down to 90%.
(i was on gprs at the time)
spbpocketplus also has a screen toggle function that you could use. it does exactly the same thing.
Click to expand...
Click to collapse
Thanks, i didnt even think about the Pocket+ screen toggle feature (i guess i was hoping for a reg hack). I tried the Pocket+ feature and it actually locks all buttons except power so this should sort me out.
wwwes said:
if you assign a button to this in wmp, you can use 'screen toggle' and it both turns off the display and locks buttons except the dpad. I use this daily to play music. played for 5 hours today and down to 90%.
(i was on gprs at the time)
spbpocketplus also has a screen toggle function that you could use. it does exactly the same thing.
Click to expand...
Click to collapse
I tried to assigned a button going through the WMP's options>buttons>toggle screen, but it did not let me. Do I have to install the spbpocketplus to accomplish this?
I had the SX66 before and now moved to the Cingular 8525. My SX66 was able to go to the standby mode while playing th WMP by turning the power switch off. The screen got dimmed and all the button except the power button became disable. I don't exactly remember why mine could, but mine had the latest ROM and etc. It was a nice function and I miss it...........

Tool to keep display OFF!

My phone is always waking up for odd reasons (AVRCP commands, switching in and out of roaming, etc...), and I can't seem to get the darned thing to stay OFF.
Music A2DP streaming is the biggest deal to me, because not only will the device wake up when I press a remote command (on my AVRCP headset), it will also keep the device backlight on indefinitely. This is clearly shortening my battery.
I tried Slide2Unlock, and have it set to shut off the display if no activity for 5 sec., but the problem is that Slide2Unlock appears to not notice when it is woken up, and just sits there without turning the screen back off again! (a simple screen press brings Slide2U back to life, and then it will toggle the screen... but this defeats the purpose!)
There must be SOMETHING I'm missing here... doesn't anyone else have this problem???
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Maybe it depends on the player you're using? With Coreplayer, my phone's screen just flashes on and off quickly when it receives an AVRCP command.
Still doesn't explain the roaming thing though.
xeno1 said:
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Click to expand...
Click to collapse
Yes, I'm using WM6 on a HTC Titan (Sprint Mogul).
I don't currently timeout to the today screen, but I don't see how that would cause my problem really- I've heard people mention that before, so can anyone explain what difference that would make?
I already have a shortcut to screen toggle (wrote my own MortScript to do it). That's not a problem anyway since every media player can assign a button to toggle the screen- The problem is that it keeps turning the screen back on when a button is pressed no matter how many times I toggle!!
Plastriq, I've heard that coreplayer does that... that's how they deal with this problem. They're the only ones that have addressed it as far as I know, and I'm not about to pay for their app when I already have TCPMP and WMP for free.
I just can't believe that there haven't been more practical ways around this yet!

screen off while music plays using headsets

I know this old and is a common problem but have searched Google, XDA-Developers, Xpansys and other forums without a working solution...
I have the TYTN II... when playing music either WMP or HTC Audio Manager the screen only dims. Side power button only dims and will NOT shut screen off from any application while music playing. The button works when music is not playing or headphones not plugged in. I even tried my bluetooth stereo headset and same problem while playing music.
I tried other apps like SPB PocketPlus (screen toggle), MortPlayer and PSshutXP with button assignments as well as a few other suggested "fixes" with no success. The results are the same. Even the power off buttons in these programs only dim my screen.
This used to work (side power button) but after installing some apps I noticed this problem. Unfortunately can't pinpoint exactly when it started. Not sure if they are the culprits. Apps that were installed...
walking hotspot
vsdraw
phonex
pocket mechanic
miriam webster
I also unistalled Phonex because I thought it was causing my phone to shutdown but later found out my battery is heading for the graveyard (almost 1.5yrs). I later reinstalled Phonex.
I did find a reg fix to keep music playing while off but without headset. Once a headset is plugged in or BT connected, then screen only dims.
wav1=0 in System\CurrentControlSet\...\Unattended key
UnattendedPlayback=1 in Software\Microsoft\Media Player\Preferences key
I have spent at least 12 solid hours over the past week looking for a fix with no working solution. I really don't want to resort to ROM flash since I may not be able to re-install some important apps. Anyways... anybody with a registry (or other) fix on this?
PLEEEEASE help!!! I travel intensively and listen to audio teachings while on the go.
TYTN II screen off solved!!!
Praise the Lord!!! found a solution that works! ...just can't remember the post anymore where I found this answer to give credit to the guy...
Well, just put this little screen saver .exe file on your device somewhere and then would be best to put a shortcut in the StartMenu. When you want to turn the screen off (i.e. during playback) then go to Start Menu and click the link. Works like a charm.
View attachment Scrsaver.zip
I use psShutXP to turn off my screen for problems like that. It does similar things, but also contains button to soft reset as well as turn off the screen.
coreplayer has the option built in and is a better player as well
you can assign "blank screen" to any hardware button
i assigned it to the space bar as i have one of my hardware buttons bring up the input panel
works with bluetooth and btaudiotoggle
if audio is the main goal...coreplayer should be your answer
i just use s2p (slide2play)
LOVE IT!!!!!
plus i use s2u (slide2unlock)
so when I start up my music.. hit the power button and music stays running but device turns off and locks... grab phone and hit power button you can control the player but not dial out or anything until you slide to unlock again....
screen only dims when playing music
The screensaver fix works but found out (in the dark) that the screen only goes black and not off. There is still a faint back light so some power is still being consumed. Has anyone found a registry fix?
All these other options listed in this post still only dim my screen while headphones plugged in. It works well when no headphones in use... There must be a registry key I can edit.

Couple of issues - HTC Touch Diamond2

I have a couple of issues that needs a help from this group.
1. I have selected to have both Vibrate abd Ring and the vibration is too strong and I would like to make the vibration quiter. Any registry setting for this?
2. When I am not using the phone and sometimes when I switched off the power button after a few seconds a blank light is glowing.
3. Is it possible to reduce the voulme by single bar instead of 3 bars at a time. It's causing a problem in listening to music. songs having too low or too high.really pathetic.. I have installed many voulme related cab files which is causing some other issues.. any good one for HTC touch diamond2?
4. Any good mp3 music player that can also be controlled through remote controller. I am having RC 100 HTC remoted controller to change the song/reduce the volume. Having SP2 player..good one but not able to control it thru' remote.
Is it possible to go to next/previous song by tilting like in sony ericsson.
5. Whenever I am opening some application, it's going to sleep/lock immediately. I don't want it to go to sleep automatically. I want to manually close. Though I have Diamond tweak with Fast Sleep is disabled.
michealjohn said:
I have a couple of issues that needs a help from this group.
1. I have selected to have both Vibrate abd Ring and the vibration is too strong and I would like to make the vibration quiter. Any registry setting for this?
2. When I am not using the phone and sometimes when I switched off the power button after a few seconds a blank light is glowing.
3. Is it possible to reduce the voulme by single bar instead of 3 bars at a time. It's causing a problem in listening to music. songs having too low or too high.really pathetic.. I have installed many voulme related cab files which is causing some other issues.. any good one for HTC touch diamond2?
4. Any good mp3 music player that can also be controlled through remote controller. I am having RC 100 HTC remoted controller to change the song/reduce the volume. Having SP2 player..good one but not able to control it thru' remote.
Is it possible to go to next/previous song by tilting like in sony ericsson.
5. Whenever I am opening some application, it's going to sleep/lock immediately. I don't want it to go to sleep automatically. I want to manually close. Though I have Diamond tweak with Fast Sleep is disabled.
Click to expand...
Click to collapse
ad 1.)
Have a look here: http://forum.xda-developers.com/archive/index.php/t-270040.html
PLease help on the below items.
Atleast for the below one.
I don't want HTC to go sleep immediately. For example, I am refering the notes in MS word in HTC, I need it to open until I close that application. But it going to sleep mode after a few seconds which causing a nonsense. I nees to switch on the phone again, enter the password and select the running pgm again.

Need major help with screen

I recently got a replacement Vogue only to find that for some reason, when I run Windows Media Player, I cannot turn off the screen using the power button and continue to hear music. The screen has to be on and does not turn itself off which causes major battery drainage . Does anyone have an idea?
My suggestion would be use Nitrogen, much better media player than WMP.
What you can do is change the toggle settings with a button, so the screen itself turns off with whatever button you wanted to map it with. Here's how to do it: Tools>Settings>Buttons then select Screen Toggle, then choose a button, and there ya go Now you will be able to turn the screen off while you rock on!
Alright, I decided to get both Nitrogen and attempt to fix the button settings. Nothing worked. It seems as though the phone recognizes the power button as a close application button rather than a simple sleep button. Putting the phone in sleep (pressing the power button) still turned the music off. Does anyone else have any suggestions? BTW im running WinMo 6.1. To add, I cannot recall this happening before I unlocked the phone, but I am still unsure of whether this still happened or not because I cannot remember.
EnterpriseNX01 said:
I recently got a replacement Vogue only to find that for some reason, when I run Windows Media Player, I cannot turn off the screen using the power button and continue to hear music. The screen has to be on and does not turn itself off which causes major battery drainage . Does anyone have an idea?
Click to expand...
Click to collapse
Here is a way: http://msdn.microsoft.com/en-us/library/ms838354.aspx
somewhere there is a cab for this.
here it is: http://forum.ppcgeeks.com/showpost.php?p=1564987&postcount=2
I installed the cab but still nothing. I also took a look at the MSDN post but I have no clue about writing C++ so... Anyone else want to give it a go?
EnterpriseNX01 what did you unlock your phone with?
Also, if I remember correctly before I switched to Android, my phone would not sleep while playing music? Or is you problem that your phone will not go to sleep at all?
I unlocked it with Cokeman's unlocker. I did get an error message that I am just remembering now, Not sure if it has anythign to do with it, but I am running windows 7 x64 and when I ran the unlocker i got an error message about something called sleep.exe. I had another post that someone told me just to ignore it and it would still unlock my phone, which it did. The phone sleeps, but does not play music while it is sleeping, or in idle (i.e. whenever i push the power button to turn the screen off).
codybear said:
Keep Music Playing:
All you do is install this,
and then when you have music playing in any program,
tap the power button to put in suspend mode,
and you're good to go.
Download Cab Installer
Registry location:
HKLM\System\CurrentControlSet\Control\Power\State\ Unattended\
Change Wav1 dword value to a "0"
Click to expand...
Click to collapse
I used this one, it works on WM6.5, I don't know if it does on earlier builds.

Categories

Resources