Apologies if this is in the wrong area. I have spent alot of time researching this issue and im yet to find a resolution. I am working in area with a strict SOE on the dekstop PC. I have an O2 XDA Atom. with activesync 4.5 I am using GPRS to connect to the internet on my o2 this is working fine. however the problem occurs when i dock the O2 into its cradle. the GPRS connection will cut and i wont be able to reconnect it. I have changed the properties of activesync and my O2 between 'my work' and 'the internet' to no joy. I realise i can do this by turning off accept usb connections in activesync but then i cannot control my O2 with the software installed on my machine..
what i want to be able to do is run MSN on my O2 continually all day and be able to view the screen from my desktop along with it syncing my calendar etc. if there is any articles which can help me that would be good ive been trying to resolve this for some time now to no avail.
Thankyou in advance
Same problem here..As I am using the my mobiler apps to control the phone via computer..The gprs is disconnected if i plug the cable data...help pls
Related
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.
thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
thats it, it finally works. Thanks very much.
Glad to hear that, thomo
You're welcome anytime, dude :wink:
activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself
I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks
I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........
Thanks, this is what i am looking for now. I will try it
i can now only online with cable, not through Bluetooth connection
go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network
bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ
like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems
I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.
test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync
Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse
can u go on the internet using active sync connection if so how?
abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)
I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.
Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???
I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.
WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.
All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.
Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin
I have done as best a search as I can of this forum but I have not found an answer to my problem.
I have an O2 MDA mini S and until recently all was well and I had no problems at all using Internet Explorer to connect to the internet through my WLAN. However, last week I had to do a hard reset and rebuild the machine. Since then Internet Explorer will not connect through the WLAN and gives the following message. “Cannot connect. Ensure your phone is turned on and correctly configured…..” WLAN is working fine, AvantGo updates over it as does SBSH Pocket Weather. PIE will connect via GPRS but when at home why pay O2 good money! I have tried various things in the connections, network cards and Wireless LAN folders. This is becoming very frustrating and if anyone out there can offer help or advice I thank you in advance and will be most grateful!!!
At work our network is super locked down with a firewall. When I charge my 8525 at work, it loads up ActiveSync and switches over to the PC internet connection. When that happens; my irc, aim and msn connections all die. I want to be able to charge my phone and sync my calendar...but I dont want to use the PC internet connection.
I searched and only found people having problems when they want to use to the PC internet and cant... in my situation, its the opposite.
I have tried disabling the tcp/ip protocol for the WM5 LAN connection, but that kills the usb connection all together, not just the internet.
Any ideas on this? or am I the first one to ever want this?
cadeucsb said:
Any ideas on this? or am I the first one to ever want this?
Click to expand...
Click to collapse
why not just use the power adapter instead of the usb and then sync it at the end of the day
Hi,
Have you tried opening activesync, going to file then connection settings and unchecking the allow USB connections? This seems to work for me, my SPV M3100 charges and still shows the 3G connection active.
Hope this helps!!
oooops!!!
willcurtis said:
Hi,
Have you tried opening activesync, going to file then connection settings and unchecking the allow USB connections? This seems to work for me, my SPV M3100 charges and still shows the 3G connection active.
Hope this helps!!
Click to expand...
Click to collapse
Sorry i missed the bit about syncing your calendar! Damn Eyes!!!
Will.
in Activesync 4.5 beta, under connection settings you can choose, "Allow wireless connection on device when connected to the desktop".
Maybe this would help?
Hi Guys
Sorry if ive posted this in the wrong place (Admins, feel free to move it if need be)
Well... My old iMate JasJar (HTC Universal) died completely last night, so today I went and got myself an OKTA Boss... Im pretty sure its an HTC Manufactured phone, just cant quite work out which model... But anyway... Onto my problem
I regularly work out of the office and rely on my PDA for internet access, I used to use the USB Dialer for WM5 with the JasJar and it worked just fine.
Now the new BOSS has WM6 so has Internet Connection Sharing... But I just cant get it to work...
Everytime I connect it the icon in the taskbar (Im running Windows XP SP2 and ActiveSync 4.5) searchs for the IP address and then fails to find an IP, coming up with a error in a bubble:
"There is limited or no connectivity on this network connection"
ActiveSync works fine, as does browsing and copying files to and from the phone within My Computer, but Internet Connection Sharing doesnt...
Heres what Ive tried so far...
-Turn off USB Connections in ActiveSync (on PC, have to do this anyway or PDA complains)
-Diabled Windows Firewall (on PC)
-Disabled or deleted all other network connections and old USB Modem drivers (on PC)
-Turned off "Enable Advanced Network Functionality" (on phone)
-Tried 3 Different PCs and 4 Different Cables (all with same results)
-Yelled @ various peices of IT equipment in my house LOL
So any ideas on how to fix this?
If not then my Screen Name is living up to its meaning.
mabey the phone is not getting gprs/edge?
Make sure you close the ActiveSync when it try to start, you can do it with the X Button
or simply use the
Setting > System > Memory > Running Program
select ActiveSync and the click Stop
If you do this quick the internet connection will up if you let the ActiveSync run long enough it will set up PC to your device connection for data syncronization/transfer only with no routing to internet.
Hope this help
Maybe Your service provider does not allow you to use your data connection to share with the pc, try using pdanet that way you can syncronise and use it for ICS at the same time
http://www.junefabrics.com/pdanet/index.php
Double Post Sorry