I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed
OK, I got a sx66 BA flashed to helmi's wm6. I want to have voice command to go through the BT headsets. I got a BT insignia stereo headset. I tried every program under the sun to get this crap to work! The best ones were MSVC 1.6 and the latest vito voice 2go. MSVC allows me to use voice dial to call but as soon as the phone picks up it switches to phone mic! weird? Vito does not allow me to do voice dial over BT but I can answer calls with my BT! So what Now? Any suggestions? Any way to integrate the two i.e. use MSVC to voice dial thru BT and have the Vito voice 2go handle everything else. Help!
Try here:
Voice Command over BT
Has anyone got Cyberon Voice Commander 2.0 (not voice dial, the whole commander that runs apps and doesn't require tags) to take audio input from a bluetooth headset?
So far, I've got the button working - simply changing the registry entry HKLM\Software\OEM\VoiceCommand Path to the proper location of the VoiceCommander.exe executable.
Audio output also works - I hear the request for a command from the bluetooth headset.
Talking into the headset does not work. I have to be close enough for the phone microphone to pick up my command for it to work. After the phone recognizes a command, the confirmation audio "Call so and so?" comes out of the phone, not the bluetooth headset.
I hate the robotic quality of MSVC and I prefer the functions of this one, but the bluetooth thing is a deal-breaker if I can't get it to work. Anybody out there using this app on their Mogul / Titan?
You ever get any further with this?
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
it is definitely possible - if with BT handsfree you mean bluetooth headsets. With my Jabra BT620s i could use MS voice commander 1.6 and give instructions....it ALMOST works, in the sense that it technically does the job but, at the end, i didn't like it: too sensitive to noise and to....my english....
andrewpmoore said:
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
Click to expand...
Click to collapse
I have the same problem - has anyone found a fix?
Incoming calls are fine, also connections that are made after the initial user-to-phone command.
I also have a diamond and this operates just fine ie the MSVC prompt comes through the bluetooth OK.
Thanks
PS yes, I have tried changing HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =vcbthag.dll to BTAGExt.dll
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.