Database Users

Req: English ROM needed

Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all

http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:

Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort

tmobile's uk site would prob be a good place to start looking

2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...

Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?

Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?

I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks

i forgot to ask you what is soft reset and hard reset ?

sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan

You guys are wonderfull :lol: i got my XDA back by bootloader method .....

Prophet does not Boot anymore - Dead ?

After applying some "hacks" to the registry as mentioned in another Topic, my XDA NEO with latest Dopod Rom does not Boot anymore...
I Get the Dopod Splash Screen, and after this a white screen - thats it...
Is there a possibilty to get a working USB Connection or to do a Hardreset ?
I mean i just edited somethings in the Registry, chich means it MUST wake up again.
Please help me, i realyy need that Prophet !

Okay i managed to enter the Bootloader after searching the wiki, sorry fpr opening this Topic...
I hope to get it fixed by now...

Same problem here.. with an Orange SPV M600 flashed with latest Dopod rom. I guess it's regsitry tweaks (I was trying to set harder the volume)

Hard reset should still work and would fix your problem

help me!!!!! please i can`t start my P3300

anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..

hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?

it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?

dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...

Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.

arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks

Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?

MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?

Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan

ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403

USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!

same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz

well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work

y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too

Is it dead??

My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks

unfortunatly yes... may be...
Hi,
I had the same Problem wirth MDA C3 and this one was bricked... But i don´t tried to start the bootloader mode (on/off + speech-dial hardware button together and than the softreset button, hold the other two buttons and press only short the softreset button)
May be than you should be able to flash it once more... However, i read this tip to late, i changed my divece before so i can´t garantee that it works....
But give him a try, it´s worth the time !!
regadrs,
andi

u'll find it in the forums somewhere, u just need to flash it with a new ROM (and USPL if it isn't the original ROM) This can be done from Bootloader as suggested by Mr.Trader.

rilazi said:
My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks
Click to expand...
Click to collapse
obtain the original rom for your device and flash it. it should be all fine.
after, install uspl, and then you flash with any rom again.
regards,

how to put p3600 original - help please!

hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks

PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957

but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!

i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)

when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/