InternetSharing over USB AND BT on PPC activated - Networking

Hi Everybody!
Looking around for a soulution to BT PAN with Toshiba BT Stack on my Dell I played a while with the USB connection.
I'm using TomTom with BT GPS quite often the same time I'm online, so I tried to disable BT on PPC, Internet Sharing with USB, IP assigned, online - then reactivated BT and it works great both together - even phone calls meanwhile connected via UMTS to the internet.
So, using the build in function in WinXP and set up alternative options for your IP/DNS/etc works even (takes 3 - 5 seconds more to obtain IP) fine.
So no need any more to deactivate BT on the PCC before using internet.
Regards,
Alex

Related

WIDSTOCK Stack and, Jabra 250, Networkinf

I have installed the Widcomm BT stack on my QTEK 2020 and now I cannot use my Jabra 250 headset. It bonds ok and creates the headset shortcut but once I connect, I keep getting 4 beeps on the headset and the calls are not transferred to it.
Secondly, I can connect to my pcs BT Serial Port and ActiveSync tries connecting before coming up with a message stating that the device cannot be recognised.
Finally, I have tried using the BT Network Access for internet surfing but as soon as I connect the BT network access, my GPRS line connects (???) for some reason.
Thanks for your help. Can't wait for a proper implementation of BT on this device as thats was my main reason for upgrading and have been very disappointed in this department.

File Transfer - Microsoft Bluetooth Stack

Reading all the posts about how horrible the MS BT stack was I was surprised to find that it does nearly everything I want. I couldn't get activesync working on the widdcom stack and so was switching between the two for different services. I've found that by initiating an activesync session on the MS BT stack I can access the internet thorugh my laptop and transfer files from my laptop to the XDA by pressing on the Explore button on the laptop's Activesync and then clicking on My Pocket PC. My BT GPS device seems to work ok, though I lose a BT connection when I'm in standby for a while. My main gripe is that half the time I can't initiate an activesync session, I either get "connecting to host" forever or "can't connect to serial port", restarting my laptop seems to help.

Using the Mini S / 9100 as an audio gateway.

Hi Guys. I have a question for you...
I'm using a VoIP softphone on my laptop (corporate, but similar to skype). I have a bluetooth laptop, and would like to use my mini S as the mic & speaker for this function.
I use a Belkin BT USB device, and it lets me connect the Mini S as an 'audio gateway' (which should do this exact task)
It connects, then disconnects immediatley.
Anyone any experiences?
Thanks, Jamassey.
never try this before. but i suggest the BT service manager(such as bluesoleil) should simulate an audio device and then you should go to the control pannel to setup a sound-device mapping.

bluetooth connection

Is it possible to use the TyTN connected with two bluetooth connections, particular a gps-mouse and a build-in freespeech car-kit?
not tried those two as a combination but I have had a phone, a pc and a headset connected to a tytn. let us know how you get on
Thanks. I will get my TyTN in a few weeks. Then I will report my experiences.

WM6 Bluetooth multiple connections problem

I have upgraded my BA to WM6 and have found that when using the BT GPS that the GPS will disconnect when I turn on the BT handsfree headset.
Can anyone provided me with some assistance to allow multple BT sessions to be connected.
http://forum.xda-developers.com/showpost.php?p=1484964&postcount=6
Thanks baniaczek I will give that a try
baniaczek I have made the changes but it will still not allow gps and headset to connect at the same time.
My problem was this on a Hermes running WM6:
When using TomTom Navigator 6 with an iBlue BT GPS receiver, if I take/make a call with my SonyEricsson HBH-IV835 BT headset, the headset becomes disconnected after approx 30 seconds. In order to be able to use the headset again, it must be turned off/on.
I fixed it by NOT selecting to use "serial port" after the iBlue was paired. I set the program port to com6 and the hardware port to com0. Works both with TomTom and Google maps.
Yeah I had this too.
try this it worked for me: http://forum.xda-developers.com/showthread.php?t=328982
good luck

Categories

Resources