[email protected] or [email protected] - 8525, TyTN, MDA Vario II, JasJam General

What is the difference is anyone of them better then the other or what is the deal. I have the pda unlimited plan which setting should i use?

An oft asked question (by me, in fact) ... and after much research, it is not clear (to me) that there is one correct response. General consensus seems to be that if the wap.cingular settings work for you, use them and don't worry about it (but you may want to not use "medianet" settings, since those have proxy settings associated with them, and the proxy settings can cause heartburn trying to use wifi and some sites).
Beyond that, purportedly there are some sites that may only work with the isp.cingular setting instead of the wap.cingular setting, but I have not found them (except, at times, the yahoo mail beta site). After much deliberation on the issue, I just use wap.cingular (with no proxy settings) and it works great, and fast.
For some old discussions on the subject, check out these threads:
-- on the cingular forums
-- on these forums

I had great luck on the mediamax plan using wap.cingular without the proxy. I did however find one exception that forced me to switch to isp.cingular and the higher cost unlimited pda connect plan. outlook web access using the html browser did not work well for me with wap.cingular, with or without the proxy. it would log me out every few minutes and I would have to log in again. it seemed to have something to do with network address translation and switching between two towers. not sure, but it is much better using isp.cingular.
this was the only exception I found.

It's all very cloak and dagger isn't it? Gotta love the phone companies: they'll do anything to not give you what you want.
Here's the deal: wap.cingulargprs.com uses a shared address with NAT; isp.cingulargrps.com assigns a public IP. Neither of these plans support inbound Internet traffic to the client (that is, they don't support push). For that you will need an unlimited PDA data plan, convince someone to add a certain feature code to your plan. and then configure the "internet" apn. The downside with going that route is that your PDA is now subject to all of the security risks that any computer with a public Internet address would be at risk for.

Related

UNLIMITED FREE GPRS access now on tmobile

well so much for $20 for unlimited GPRS from t-mobile...
it's now FREE!!
I just found out T-Mobile has free unlimited GPRS.
The thing is, it's limited to webbrowsing and POP email.
If you pay $0, you get access to ports 80, 110, and 25. it's supposed to be wap only but it accesses http sites as well.
downside: cant access ssl, ftp, instant messenger, etc (anything that uses other ports). for that, you have to pay the $20 per month.
i just dumped my $20/month plan this evening cause i can do without those other ports, is it wooth $20/month to use IM? i dont think so. free unlimited gprs webbrowsing owns
oh yeah, and the aim client on the ppc can be set to port 80, so it works.
now i switched from internet2.voicestream.com (which stopped working for me once i called in and cancelled the $20/month data plan) to wap.voicestream.com and i still browse sites, send email, etc.
no bank site access (ssl) but bank access isn't worth $20/month, i'll wait to be on my desktop for that.
-arebelspy
you are a... GENEOUS!! (is that how its spelled? )
now, have u figured out how to get and send MMS from pocket pc, without ordering Tzones? :roll:
MMS is no longer part of the T-Zones. With the same changes for the "Included WAP Access" also came "Unlimited Picture Messaging". They've made it where you don't have to do T-Zones for sending/receiving MMS. HOWEVER, you are charged $0.25/MMS that you send/receive. There is a promotion for $4.99/mo that gives you Unlimited Picture messaging through 12/31/04. After that date it reverts down to 50 for the $4.99.
Hope that sheds some light now on the matter.
Thanks for that info. I'm Looking forward to using it when i get my XDA II in a few days.
They won't list zero cost features on the site. All phone plans come with the free WAP access now. If your phone isn't working with it, contact Customer Care and ask them if it's on your account. They will add it i'm sure.
It was originally setup to allow customers to download ringtones and wallpaper without signing up for the monthly fee. Seems like this is a small little suprise for us tho!
I tried it and is not working for me. Are you sure that I can just call CS and they'll add it to my account?. I don't want to spoil people's luck. Maybe is an oversight from them
Ive used both, and if your not going to use the gprs for anything too overbaring go 4 it, but with the wap access, it limits alot, plus is significantly slower
btw: im sure TMO will charge u for sumthing extra sooner or later
(pps) (i have a feeling there are undercover TMO employees spying) :!:
you need to use the address wap.voicestream.com
it's not slower, it's the same speed.
it is limited in that you only get web browsing and emails (ports 25, 80, 110 and 143 for smtp, http, pop, and imap respectivly), if you want all the ports (for instant messaging, ftp, ssl, etc) you need to get the $20/month data plan.
http://www.howardforums.com/showthread.php?s=&threadid=237460
-arebelspy
i guess this is all US based stuff. Any ways to get cheaper/free GPRS in UK anyone?
arebelspy said:
it's not slower, it's the same speed.
Click to expand...
Click to collapse
so then why was it that when i was downloading a 2mb file it would take 15-20 minz....not it takes 5-7 minz :?:
OK, I tried and it keeps not working for me, I called T-mo and they say that that is only for regular handsets, that for us, we would need a data plan, they even xferred me to tier2 people, (which were clueless) and he said that in order for me to take advantage of the internet, I have to pay.
I said for the to reset my settings in their end, but they said that they have nothing to reset, since I don't have any data plan.
I have tried all, changed the internet2.voicestream.com for wap.voicestream.com, try making a new connection, with all those settings, and nothing. Anybody know any clues?
try internet3.voicestream.com
-arebelspy
internet3.voicestream.com is for their VPN option ($19.99/mo)
internet2.voicestream.com is for their non-VPC option ($19.99/mo)
wap.voicestream.com is for their WAP service (all other devices)
I thought I also saw somewhere the address wap.myvoicestream.com. Now I can't remember which one works.
internet3 has worked for some people without data plans (only the free wap service). no idea why.
try them all to try to make it work, lol.
-arebelspy
Arkhangel said:
I thought I also saw somewhere the address wap.myvoicestream.com. Now I can't remember which one works.
Click to expand...
Click to collapse
Yea its the T-Zones home page, try it and see ( http://wap.myvoicestream.com ).
Oh yea I forgot to mention that it only works with a WAP browsers.
HTH
what are the instructions for setting this up? I just opened IE and it works but I wonder if im being charged per minute?
Nope, T-Mobile no longer counts MBs, minutes, anything. Every plan has free browsing (free access to ports 25, 80, 110, and 143).
-arebelspy
can't email other than optonline???
i have the imate ... i set up the account with my email as [email protected] using mail.optonline.net incoming /outgoing now i can recieve from everyone ..i can only email out to another @optonline.net account .......no @aol.com or business account [email protected](my business address at work)... so what iam doing wrong....please help
I swear! I didnt think T-mobile could get any ... more ... better than AT&T. I was, once again, wrong.
the pge http://wap.myvoicestream.com does not seem to come up on PocketIE - a post above says that PIE can handle wml pages...
So, is the address incorrect, or is it PIE that cannot handle WAP?
J

T-Mobile USA GPRS cannot reach google web sites

I signed up for the T-Mobile USA internet (GPRS) few days ago.
I could establish the connection using my Universal.
I could browse most web sites, and could download emails from my company exchange server and Hotmail.
Only one strange thing, i could never download emails from Gmail. It will go to the login process, and when it reaches the Sending and Receiving... it will go forever.
I also noticed that I could not browse any google.com web sites including www.google.com, mail.google.com, news.google.com etc..
I tried to get T-Mboile technical support help but it has been useless and helpless. Somebody told me that it might be something to do with the MTU size that the T-Mobile network can pass along today.
If I swicth over the connection to Wifi or dial up via GSM, I can reach everything including Gmail and Google web sites just fine, from the same device (Universal).
Any one, that uses T-Mobile USA GPRS as well, can you please help?
Thanks.
hey I have t-mobile usa also but with the PDA2K (BlueAngel) when I was running WM5.0 and now back to 2003se I had no problems connecting to google.com/pda but I do know that their is a registry hack to make it go to the default google.com but I wouldn't advise it, becuase it interfeirs with other web sites.
Also T-Mobile has 2 data plans WAP and Total Internet the wap is limited to wap sites and such but the other is open to all sites, check your settings to make sure you are connecting to GPRS and not WAP.....
The difference is like 20 or 30 a month though
WAP 19.99 or 9.99
GPRS 29.99 and up for MyMail or VPN MyMail
I have the full GPRS (the new name: Total Internet for $30). Now its bundled with the hotspot and they are not longer offering the $20 for GPRS only.
Can you tell me what access point you set in your device? Mine is set to wap.voicestream.com and use no proxy. i noticed some ppl posted before that they proxy instead.
Thanks.
your connection is incorrect if you notice it is set to wap. even though you have the total internet that is only connecting you to the wap
your access point should be
internet2.voicestream.com or
internet3.voicestream.com
I used 3 on WM5 and it was fine I also use 3 on wm2003se
negative. I could connect to internet2.voicestream.com but not internet3.voicestream.com
internet2.voicestream.com gives me exactly same result.
I can connect to any websites but not google.com with both wap.voicestream.com as well as internet2.voicestream.com
very strange. anybody in Texas particularly has same issue?
I'm out of Massachusetts, but was in Dallas a few days ago and had no problem connecting to Google. I use internet2.voicestream.com
This issue has been driving me nuts for 6 months. I've been trying to nail down the problem, I'm wondering if it's a regional setting with T-mobile's servers or incorrect account set ups. Some people with other Universals and Wizards in other area's claim they do not have this problem.
Here's a general thread on Ho-fo that's been getting some hits, when I posted about it here on XDA forums there wasn't much response.
http://www.howardforums.com/showthread.php?t=605044
I actually have a couple friends how work for T-mob that thought the problem was with my JasJar until they got ahold of the MDA and discovered the exact same problem.
I've emailed google, just got a response saying they would forward the concern to their tech's. Please share any info or response you get so we can try to get this resolved!!
I've actually had the same problem and I'm on Cincinnati Bell (which is also Cingular & AT&T). I used to be able to connect with no problem on my PDA2k but with the Universal I can't connect. Actually, I've been able to hit the www.google.com/pda site and type in a search but then it just sits & spins forever.
I have the same problem with my MDA from T-mobile. It only happens sometimes. It always connect to google and m.gmail when using wi-fi, but is very hit or miss when connected over GPRS.
Thats the least of my problems however, as I am constantly getting dropped from the GPRS data network even with full coverage, and I'm in the NYC area. I have alerted T-mobile to both problems and am considering turning in my device since i still have a week to do so not because of the device but because of the connection issues with the network.
This has been a bit of a nightmare when it comes to email, because I came from using a blackberry where all my accounts were instantly pushed, to this now when sometime i get email, sometimes not, my Gmail doesnt work properly, and it can take a half an hour for the email to finally reach me.
No problems here
I have no problems connecting to Google.com from my Blue Angel, or from my friend's Wizard. I'm still waiting for my Universal.
I don't have Total Internet Plan, though. I just have the T-Zones hack: In Settings/Connections/Connections, go to "Edit my proxy server" and select "Advanced". HTTP server should be set to 216.155.165.50:8080. Any other HTTP settings should be cleared.
I've noticed in the past two days, however, that Google seems to have changed what it considers a "mobile device", based on the client's User-Agent string. It goes to www.google.com/xhtml if it detects a mobile device. Previously it went to www.google.com/pda , but for a smaller number of devices. Google's "mobile" page has fewer links on it, and is not as useful as the main page.
I use NetFront 3.2, which allows me to change the User-Agent string to make it look like a desktop browser. Today I changed it to:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; en) Opera 8.51
I also changed the language/platform to en/x86.
This seems to make Google go back to the normal page.
But no connectivity problems are happening with GPRS. I can search Google, browse results, search newsgroups, search News, etc.
There was an T-mobile outage reported in California last week (search HowardForums). Perhaps this is related (routing issues?).
PS: It seems to depend on the User-Agent, whether www.google.com/pda or www.google.com/xhtml is used. If I run Pocket Internet Explorer, it still goes to /pda (searches work fine). If I run NetFront with factory settings, it goes to /xhtml. If I run Opera, or change Netfront as above, then it goes to the Google main page. In no cases does it have problems connecting. Response is a little faster on the main page, though, which would seem to indicate that Google Mobile does something which is slower.
[rant]
Google saying that they "don't support T-Mobile devices with Google Mobile" is like saying "best viewed with xxx browser". The phone provider should have no effect on the usability. Nor should Google have to go out of their way to provide a different experience for Mobile users, or to second-guess their needs based on a User-Agent string -- anyone with any browser should be able to use Google, and nothing special should be done for mobile.
I say disable Google Mobile, by changing the User-Agent.
[/rant]
I have a T-Mobile MDA with the Total Internet plan and Google works fine for me.
Thanks for feedback folks. This isn't a new issue, I've had this problem for 6 months. I currently have my user agent set to IE 5.5/NT so that I can access my bank web page, I've tried several combinations of user-agent settings with no luck, can you explain the exact changes I'd need to make to try your current setting?
Also, I'm hoping that when Netfront releases a WM5 compatible version I can run through a proxy server (which I've also heard solves the problem).
This is with Blue Angel (SX66), WM2003, T-Mobile T-Zones proxy, NetFront 3.2, so your mileage may vary. I will be getting an O2 Exec any day now.
Tools/Browser Setting/Misc/User Agent/Edit
Title: (anything you want to call it)
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; en) Opera 8.51
appName: (blank)
appVersion: (blank)
appCodeName: (blank)
language/platform: en / x86
Tools/Browser Setting/Network/Proxy (T-Zones only, not Total Internet)
Use Proxy: (checked)
Proxy (hostort) 216.155.165.50:8080
Note that NetFront 3.3 is coming out soon. I'm sure it will support WM5.0, but right now Access says "(* Its verification is not completed.)"
Have you tried Opera? It works with T-Zones proxy, at least in WM2003, if you set the proxy in the GPRS Connection Settings.
It might be worth trying the T-Zones hack. Go to My T-Mobile, log in, and then go to this T-Zones page (if that does not work, go to "Plan&Services, Learn About Services, Communication, T-Zones"). Add T-Zones (aka T-MobileWeb) to your plan. Then you should be able to use the proxy as described above. You can remove it later if you don't want to pay the $6/month extra. Some people have even reported being able to add it and remove it immediately, but keep the services.
I tested to connect to the internet via T-Mobile GPRS with my universal as a USB modem hooked up to my laptop.
And it gives a totally different behaviour compared when used directly from the Universal (with pocket IE and Mail application).
Besides a decent speed, I could browse to google, perform search etc, everything seems to work perfectly (from my laptop, Universal as a USB modem). When I browse the same thing again from the Universal, same problem occured again, never get any search result back from google, and GMail will stuck in the step "Sending and Receiving..." which will go forever until it times out.
I also tested with my Wallaby the same thing to make sure its not the device problem, and it turned out the same problem exists also.
I really could not pin point where the problem is. Please help to think, folks. Its not the device problem? Is it T-Mobile GPRS network problem? Or what?
Are there packet sniffers for PPC? Something like tcpdump, traceroute, ping? That would be my next step. See where it's hung up.
There are some PPC tools for that stuff, I played with an app called TCPTune (I think) but couldn't accomplish anything, I'm totally ignorant of the network stuff.
Re: No problems here
leek said:
In Settings/Connections/Connections, go to "Edit my proxy server" and select "Advanced". HTTP server should be set to 216.155.165.50:8080. Any other HTTP settings should be cleared.
Click to expand...
Click to collapse
Holly crap I made this change (still with full Tmob internet plan) and a few registry edits based on your Netfront settings (probably butchered my registry) and manually forced a connection via my WAP settings and THEN LOADED GOOGLE OVER GPRS!! FULL HTML GOOGLE, NEWS GMAIL, IMAGES, ON MY JASJAR VIA GPRS OMG!! I'm really feeling very strong emotional feelings of like towards you right now Leek! :lol:
I'm having some trouble with google local not returning results (starts to load a page with a text box and then stops), not sure why but I suspect it's a problem with my hacked up user agent registry settings.
So, here's my question - I really don't mind paying the full $20 for regular GPRS (and wouldn't want to worry about full access via the $4.99 tzones going away), how do I either make this work using my regular GPRS settings (so I don't have to use an alternate connection) or how do I get the WAP settings to work as my primary settings for all programs? I was able to update my feeds and load images over this WAP settings just fine, but when I tried to check my email or load Agile messenger it tried to load my regular GPRS settings.
In order to figure out exactly which change made this work I went back and reset my PPC to a backup from last night. The only registry edits I have now are my old ones that made PIE show the version as "MSIE 5.5" & the platform as "Windows NT 5.0". Other than the changes below, I'm using the T-mobile CAB settings from i-mate.
I went into settings > connections > and below My Work Network I went to Manage existing settings and then clicked on the Proxy Settings Tab. The two check boxes were already checked but the proxy server was blank so I entered the 216.155.165.50 and then click on advanced. and it then showed that server under Type HTTP but the port was 80 not 8080, I then clicked on the HTTP server and edited the port to 8080 and then hit ok. I left all the other servers that were listed as is.
From the main Connections > Settings screen I then clicked on manage existing connections, it brought up the T-mobile WAP connection and then I click-held on that and selected connect. I then loaded PIE, navigated to Google and grinned as it loaded everything.
Under this connection type most other web pages I've been trying work fine, although some (like howard forums and search.yahoo.com) don't work. *edit hofo might be down right now*
The problem I was having initally with Google local (via web, haven't tried the local java app) is resolved and it now loads fine, as I suspected it must have been my hacked up user agent registry settings. I'm now also able to check and send POP email with this WAP connection, Agile Messenger connects to the servers.
Big thanks to leek for posting this fix here, now how can I make this my default connection and should I try to downsize my account to just the $5 tzones account?
found how to make it the default connection method (connections > settings > advanced > select networks > and then set the top drop down to "my work network".
Leek, buddy, I owe you a case of beer... This had been driving me nuts for 6 months, you solved it!!!
hi galt and leek,
I'm so excited to read that you guys succesfully solved this.
i could not try it out anymore, I changed my T-Mobile plan yesterday, I removed my total internet plan as I don't want to pay $30 per month without even able to access my primary email account: Gmail and google around.
SO, can you give summary again how to make this works?
I assume no extra application to install beside all standard application built in WM5.
Pls clarify:
1. Get T-MobileWeb /t-zones plan ($5.99)
2. set the proxy setting for HTTP with the port 8080 and left others empty (including the SOCKS, WAP)
3. Use the APN: wap.voicestream.com
Do I miss anything? Any reqistry setting I have to make?
That's it? And you can have full access to the internet? Can you clarify if Gmail is working via POP3?
I tried the proxy setting when I still had my total Internet plan but it did not work out. :`(

o2 mobile internet problem - help needed

I bought a sim-free htc touch hd a few weeks ago, bought an o2 pay&go sim, added the unlimited web blot-on, and thought everything would be just fine. But I was wrong.
It worked fine on the small number of occasions I used it before yesterday.
Since I added the web bolt-on, the automatic connection settings no longer work and I get the following message every time I try to set up the data connection:
Dialed:
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again.
Click to expand...
Click to collapse
Other than trying the automatic connection setup feature a few times, I've also tried manual settings. Currently my settings are as follows:
Modem selected: Cellular Line (GPRS, 3G)
Access point name: mobile.o2.co.uk
User name: O2web
Password: some 16 digit long network automatic password
Domain: no value entered
Advanced settings:
TCP/IP: Use server-assigned IP address
Servers: Use server-assigned addresses
Click to expand...
Click to collapse
I've tried using a different username and password, same the ones listed on most setup guides.
I've tried entering a manual DNS, and Alt DNS server address under advanced settings.
I've tried setting up the connection from scratch.
And I've tried doing a soft reset followed by restoring it to factory settings.
Currently I am using ROM version 1.14.4005.3, and have nothing else installed on the device. I do not currently have access to anything other than a mac, so cannot use any windows-related troubleshooting devices.
Absolutely anything you could suggest would be great. Rang o2, but they were unhelpful. Thanks chaps.
iamelegy said:
I bought a sim-free htc touch hd a few weeks ago, bought an o2 pay&go sim, added the unlimited web blot-on, and thought everything would be just fine. But I was wrong.
It worked fine on the small number of occasions I used it before yesterday.
Since I added the web bolt-on, the automatic connection settings no longer work and I get the following message every time I try to set up the data connection:
Other than trying the automatic connection setup feature a few times, I've also tried manual settings. Currently my settings are as follows:
I've tried using a different username and password, same the ones listed on most setup guides.
I've tried entering a manual DNS, and Alt DNS server address under advanced settings.
I've tried setting up the connection from scratch.
And I've tried doing a soft reset followed by restoring it to factory settings.
Currently I am using ROM version 1.14.4005.3, and have nothing else installed on the device. I do not currently have access to anything other than a mac, so cannot use any windows-related troubleshooting devices.
Absolutely anything you could suggest would be great. Rang o2, but they were unhelpful. Thanks chaps.
Click to expand...
Click to collapse
Those are the O2 contract settings. PAYG settings are different and one will not work with the others' settings. You'll have to scoure the O2 website to find the manual settings for PAYG (or PAG as O2 calls it).
A word of warning, however, after just coming off P&G and onto contract, and thus knowing the limitations of both, your mobile web with P&G will be severely crippled.
Unless O2 have changed their settings on the server side, the only web program that will work will be Opera. Email client and youtube won't work as P&G is limited to port 8080 (HTML) only...
This is something that really annoyed me when I was with P&G because I couldn't use my mobile's email client because it just could not connect.
sorry, rant/warning over! Summary: you need P&G specific settings, you can find them (eventually) on the O2 website - keep trying makes and models until you find one that gives you the manual settings (I can't give more help than this as I had to do the exact same thing myself!). HTC auto-connect wizard only has contract settings in it. Also be warned that potentially only Opera will work once you get the settings!
chaosdefinesorder said:
Those are the O2 contract settings. PAYG settings are different and one will not work with the others' settings. You'll have to scoure the O2 website to find the manual settings for PAYG (or PAG as O2 calls it).
A word of warning, however, after just coming off P&G and onto contract, and thus knowing the limitations of both, your mobile web with P&G will be severely crippled.
Unless O2 have changed their settings on the server side, the only web program that will work will be Opera. Email client and youtube won't work as P&G is limited to port 8080 (HTML) only...
This is something that really annoyed me when I was with P&G because I couldn't use my mobile's email client because it just could not connect.
sorry, rant/warning over! Summary: you need P&G specific settings, you can find them (eventually) on the O2 website - keep trying makes and models until you find one that gives you the manual settings (I can't give more help than this as I had to do the exact same thing myself!). HTC auto-connect wizard only has contract settings in it. Also be warned that potentially only Opera will work once you get the settings!
Click to expand...
Click to collapse
Thank you so much. I may love you. In a non-gay way. Anywho, I've found out how to do it. It's extremely simple now that you've pointed me toward the problem.
Go to Settings > Connections > Manage existing connections
Then under the 'Modem' tab, edit your connection.
All you have to do is change the access point name from 'mobileweb.o2.co.uk' to 'payango.o2.co.uk'.
Very simple.
And thanks for the warning about the limitations. I might take that up with them, since it is not mentioned when purchasing the web upgrade or sim. I'll test it out first though.
iamelegy said:
Thank you so much. I may love you. In a non-gay way. Anywho, I've found out how to do it. It's extremely simple now that you've pointed me toward the problem.
Go to Settings > Connections > Manage existing connections
Then under the 'Modem' tab, edit your connection.
All you have to do is change the access point name from 'mobileweb.o2.co.uk' to 'payango.o2.co.uk'.
Very simple.
And thanks for the warning about the limitations. I might take that up with them, since it is not mentioned when purchasing the web upgrade or sim. I'll test it out first though.
Click to expand...
Click to collapse
It's a general thing with PAYG really, telcos want you to have contracts - make more money from you that way! all PAYG SIMs go through proxies for mobile web connections, and almost all the PAYG proxies are limited to 8080 only.
Then again, it sounds like you didn't use the proxy settings so we'll see what happens w.r.t non html usage!
When you get a chance, could you please have a play with trying to use Gmail on IMAP and/or the YouTube and/or weather panel and report back whether it works or gets timed out? I'd really like to see how you get on!
As I already have many phone contracts in the family (that I'm paying for ), I got one of those o2 simplicity 30 day rolling contract things, the cheapest one for £10, then added £7.50 web bolt on, that lets you do whatever you like (you tube, mail etc all works fine), I thinks its also 150mins and 300txts.
Tmob do one as well that I think £20 for more mins, Unlimited txts and free web (special offer at the moment). It is a better deal than the o2 for only £2.50 more, but I have better o2 reception where I am, and also they use the Edge network.
chaosdefinesorder said:
When you get a chance, could you please have a play with trying to use Gmail on IMAP and/or the YouTube and/or weather panel and report back whether it works or gets timed out? I'd really like to see how you get on!
Click to expand...
Click to collapse
OK, I've played about with these a bit, and they seem to be working fine. Weather works perfectly, as does my Gmail account on IMAP.
The youtube application is extremely slow, but I'm assuming that is more general, than a specific PAYG problem.
As I already have many phone contracts in the family (that I'm paying for ), I got one of those o2 simplicity 30 day rolling contract things, the cheapest one for £10, then added £7.50 web bolt on, that lets you do whatever you like (you tube, mail etc all works fine), I thinks its also 150mins and 300txts.
Click to expand...
Click to collapse
I've got their 'Your Country' SIM pack, which is purely top-up, but they deduct the 7.50 form my credit each month. It's great for me, since you get free minutes for calls to overseas whenever you top-up - damn useful for an Irishman.
Can't afford 20 pound every single month unfortunately. Student life (ignoring the fact that I managed to get a HD).
Thanks again chaps.

Using a Proxy Connection

Hello.
I have a HTC Touch (Elfin) and have recently gave up my option for 10MB Mobile Internet for a Vodafon Live option with 500MB included.
I realised then that the Vodafone Live connection implies using a http/wap proxy wich will only allow internet acces for the web browser (Internet Explorer as well as Opera or Opera Mini work fine) but not for other applications like Instant Messenger Clients, Games or other similar.
I would like to know first of all if there is a way of tricking that proxy connection so I can be able to use other applications with online functionality.
Secondly, if that is not possible (as I suspect) I would like to ask if there are other applications (besides internet browsers) that could youse a http connection for their purpose. Most important would be an Instant Messaging one with Yahoo protocol support.
Thank you for your help.
edit:
In case it matters, this aplies to Vodafone Romania.
For Vodafine Live, the apn is live.vodafone.com (user live, pass vodafone) and the proxy are only defined for http (with 8080 port) and wap (with 9201 port). Secure wap and socks proxy are undefined so probably cannot be used/
Same problem here. Help would be very apreciated to make aplications like outlook , messenger or VNC client to work with http proxy conection.
@glumetzu : incearca shmessenger , e facut de romani si merge pe Java
i have same issue, but there is a workaround kinda...
i came back to romania now to visit family and i got a sim card, number and prepaid data service with vodafone.
my apn is live.pre.vodafone.com, but uses the same user/pass and proxy settings and suggested above.
i noticed that once i connected with microsoft rdp, it wouldnt work. nor would my internet video security cameras from home, which all use different ports.
now here is the strange bit. using another apn without a proxy worked fine on the phone itself. i forget which one it was, and will not test now to find out. it was either live.vodafone.ro or live.vodafome.com but without using the proxy settings. it worked for me no problem. the problem was once i connected to the laptop to use the usb internet sharing. i took the money from the voice phone balance and after a few hours i was disconnected. both data and calls couldnt be made since the balance was -1.19 euro lol
anyways, point is there is an apn settings that seems to work on the phone only without limits in regards to ports or proxies. this worked fine without killing my account balance. it was only once i connected with the laptop that it killed it.
i'm currently researching on how the network gateways are able to detect this.
however using the proxy server with the apn live.pre.vodafone.com i am able to use my full 250mb package from the laptop without affecting the voice package account balance, not sure how or why this works but i have confirmed this in real-time while at a vodafone store in cluj. the sales lady had access to monitor voice and data usage for my account and we tested using the apn and proxy with the laptop. it didnt affect the voice plan money.
so for a quick answer, you can use a laptop and tether the connection. but be careful and double check ur balance after u download a test file using the laptop, just to make sure it wont kill ur account balance.
also, it works now. but for how long? more research is needed and maybe i need to play around with programs like ztunnel or an http proxy app that can tunnel ALL active connections from port to port and vpn through my home network. that would make it more secure and less likely to be picked up by the isp since they would only see port 80 activity going to one place all the time....

having trouble using web2go / tzones on wing?

I am having trouble trying to use web2go/tzones on my wing. I got 9.99 web2go plan and when i try to visit any site using internet explorer i always get a message that I don't have the right type of internet plan and I need to upgrade it in order to use internet on my wing. I have used both wap.voicestream.com and epc.tmobile.com with and without proxy 216.155.165.50:8080 it seems like tmobile systems are recognizing my phone type and not letting me use web2go on my wing. I cannot even update weather on my phone. Is there any additional settings I can use or anything else I can do to get web2go working. I only need data plan for very light browsing so I don't want to sign up for expensive plans.
Thanks
If you have web2go, you can NOT use epc, you have to use wap.
On my Wing, under Connections:
Name it something
Modem type is Cellular Line GPRS
Access point name is wap...
User, pass, domain is all blank
Remove any type of proxy settings.
It may just be easier to delete everything you have now and just add that.
Hope that helps.
T-Mobile Data Hack & epc.tmobile.com
I continue to use T-Mobile Web at $5.99 a month and I just installed Ivan's Windows Mobile 6.5 Alpha 11 and added the new APN - epc.tmobile.com and it works just fine. In fact, when I installed his ROM the first time I had no problems accessing GPRS, but the next time I installed it, I couldn't access the internet. Under Connections 6.5 had "wap.voicestream.com" , "[email protected]" and "[email protected]". It was there I added the new APN and ran IE6 Mobile. All that said, if there is a difference other than the price between T-Mobile Web and web2go, I don't know. Before all the changes were made to data plans, I assumed T-Mobile Web was unlimited and I use the hell out of it when I was at work listening to then XM radio and SkyFM. I do know over on MyT-Mobile as on the Wing you can monitor the amount of data used, whether they're enforcing a FAP on the new data plans, I simply don't know. I've never had any problems with my plan and have noted the new APN is faster than the old voicestream wap. Take care!
have sed all ways of web2go apn connections internet2 epc etc. As of today when I try to visit a website, it redirect me to wipcore.t-mobile.com or something like that and it says that I must subscribe to the webConnect but why would I want to pay more and do that? Any help/ideas what I can do?

Categories

Resources