Hi!
i have a tytn with a big problem; in fact it does not start, it is blocked in the start page (them with Htc logo).
I try to reset it some times and also to change battery!
I cannot do an hard reset beacuse i have some data in the pda!
If i put it on bootloader mode is possible to recover it (only some data?)
tks
khael
Ok, here's what you need to do...
1)Open your hood and check that battery connection, if thats good then proceed.
2)Check all your spark plug wires and make sure they're all fastened properly and no cracks/tears in them that would be causing them to short out. If they are good then maybe you should pull one out and see if its clean, soaked, or got some burns on it(make sure if u check a plug, then you return it to the same cylinder). If they are clean then go on, if not, replace them.
3)Check your airfilter. If dirty clean/replace it.
4)Check your fuel delivery system. If its fuel injected then give your fuel rails a visual inspection, if you've got an asian/import and the fuel rails are well exposed and you've got some knowledge of working on cars, go buy a fuel injector tester, doesn't cost much it'll tell u if any of your fuel injectors need to be cleaned or replaced.
4)Check your oil. Make sure its at a safe level and not too dark.
5)Radiator, open the cap and check your coolant, make sure its the color it should be(some use green coolant, and some use red). If its got oil mixing with it then youve got a..... wait, we're talking about phones!!
Have you tried to start it without a mem card? maybe its trying to start up a corrupt app from the memcard or something similar. If you have tried that or don't have a memcard then i'm sorry to say, yes the only option i see for you is to start it in bootloader and flash your device or hard reset it, and yes if you can't turn it on then your gonna loose the data on your device. Don't worry you don't understand how many times i've lost data from my device from having to hard reset... it sucks, i know, if you need a shoulder to lean on, then all xda-dev is here for you.
also without the memory the pda doesn't start...
But in bootloader mode is impossible to read the file?!
Upp!
can someone help me?
Some one posted this and it worked on my wizard. Tap the screen every 3 4 seconds. Worked for me.
duman95 said:
Some one posted this and it worked on my wizard. Tap the screen every 3 4 seconds. Worked for me.
Click to expand...
Click to collapse
just curious, but what does this do?
..
do you think that is a solution?
Now i try...but i don't think that function!
no....
the pda don't start...
But in bootloader mode is impissible to recovery some data?
I need only a few documents that are on the My Documents folder!
Please help me!
I'm without telephone because i can't do an HardReset ... them documents are so important!
More information needed...
You DO NOT see the "Windows Mobile" screen? It HANGS at the "HTC" screen already?
Guy, what did you do before? Some ROM flashing? Radio flashing?
Hi!
The pda freeze on HTC logo.... i can't see "Windows Mobile"!
I reset the pda because i was using Opera and freeze...
I wasn't flashing Radio or Rom!
Sorry for my bad English
I think which with an Hard Reset the Pda start, but i can't lose the documents.
They are so important.
Is possible to recover it?
If i put it on boot loader mode, and do a backup of the rom?
I can't recover the document?
Please help me...
Tks
Simone
upp!!
nobody can help me?
Why i don't receive an answer?
Is impossible to do it?
tks
khael
hi (sorry for my poor English - I'm italian)
I have the same problem: I need to save some data but my handheld does not boot up.
When I installed tomtom 5.21 my handheld does not respond to any imput so I soft reset it and...
the system freeze at the bootlogo after rom informations.
1. I am hounting the way of connecting to device with "active usb kitl mode" (pwr button + comm manager, stylus reset) and "platform builder 5.0" but the comunication seems to be impossible under this mode.
N.B.: ...but maybe some wrong parameter because I try the same procedure with a working handheld (qtek 9090) and kitl mode does'n permit access from platform builder. Through activesync the comunication is ok (but this mode is impossible if the target device does not boot up). So I thing that:
a. the comunication is impossible under handheld kitl mode or
b. I am unable to configure the connection parameter of platform builder 5.0
2. If I hardreset I will lose my data. Someone know what happened to my data if I install a differen rom, could I choose to keep my data???
thanks
successfull connection under kitl mode and PlatformBuilder5.
Now I can debug hermes200's bootup:
02/18/2007 13:28:46
[K :: KERNEL]
2ND Timestamp: 0x6a358e
!ERROR: NK!SC_CreateLocalView: failed opening "\windows\wince.nls"; error=2. Expect boot failure!
!ERROR: NK!SC_CreateLocalView: make sure "wince.nls" is present in your image.
Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
AKY=00000003 PC=03f8e83c(coredll.dll+0x0002e83c) RA=03f8e814(coredll.dll+0x0002e814) BVA=04000000 FSR=00000007
Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
AKY=00000003 PC=03f8e83c(coredll.dll+0x0002e83c) RA=03f8e814(coredll.dll+0x0002e814) BVA=04000000 FSR=00000007
Data Abort: Thread=839ce8ec Proc=802b3410 'filesys.exe'
AKY=00000003 PC=80016e5c(NK.EXE+0x00016e5c) RA=80016e3c(NK.EXE+0x00016e3c) BVA=03f31528 FSR=00000007
anyone has same problem?
how to put the missing wince.nls on my herm?
ciao
sono anche io italiano
a quanto pare nessuno riesce a darci una mano!
te come risolvi?
Per me non riuscire a recuperare i dati e' davvero un grosso problema!
Ciao
simone
Stesso problema,mi rimane con la scritta htc.Come faccio hard reset?Se schiaccio tasto dx,sx,reset mi va in boot.A questo punto nn mi interessa dei dati,basta farlo partire....una rom ufficiale da mettere su?
x bcooll
su herm 200
hardreset: premi i 2 tasti col segno "-" (quelli immediatamente sotto lo schermo) e mantenendoli premuti fai il reset con il pennino. Ti chiederà una conferma, per rispondere usa la tastiera
"-" (LEFT) + "-" (RIGHT) + STYLUS RESET
bootloader: "ok" (su fianco sinistro) + "power" e tenendo premuto fai il reset col pennino;
"OK" (LEFT SIDE) + "POWER" + STYLUS RESET
usb kitl: "ok" + "manager reti" (sotto tasto power) e tenendo premuto fai il reset col pennino.
"OK" (LEFT SIDE) + "COMM SWITCH" + STYLUS RESET
P.S.: se avessi trovato una rom ufficiale probabilmente sarei riuscito a ripristinare il palmare senza perdere i dati. Ma ora mi sono arreso ed ho compiuto il grande passo.
P.P.S: Mi sembra cortese scrivere in inglese dato che il forum è in inglese. Se lo vogliamo in italiano facciamocelo ma non rompiamo le scatole a xda developer
Grazie girolamino..........
Related
does anybody install the destinator3 on an XDA II? the install programm can't found the memory card, can see only the main memory and the virtual the memory of 14,5mb.
thanks for your help.
I think a patch has been released for use with activesync 3.7.
I used the patch for destinator3 from the destinator2.com web site but doesn't change, I was got the same problem with the destinator 2 software, I can install the program but I can't install the maps on the secure digital card.
If I remember correctly, I think it is possible to copy the maps to the storage card without using install, just put card in card reader and copy files as usual but make sure directory structure is correct.
I tried but the card is protect from writing! you can do it only with a brand new card, I tryed to format the card but it writing protected, do I could put it in a boiler or in a microwave to restore it?
I wouldnt bother with the microwave or the boiler, a melted card wouldnt hold maps. Check if the switch on the card is in correct position. You should be able to format the card, if you cant format or write to it then I suggest it may be faulty/broken.
I know, the switch is in the right position, and is the same with both cards one 256 and one 128mb.
I wrote to the destinator help desk and I'm waiting for a reply, I hope they found a solution.
thanks for your help.
fabio said:
I know, the switch is in the right position, and is the same with both cards one 256 and one 128mb.
I wrote to the destinator help desk and I'm waiting for a reply, I hope they found a solution.
thanks for your help.
Click to expand...
Click to collapse
Ciao, dove hai acquistato destinator 3 ?
Grazie.
;-)
ho fatto l'aggiornamento sul sito destinator1.com, mi è arrivato in 24 ore, troppo simile a tom tom ma è un gran bell'oggetto, funzionasse!
fabio said:
ho fatto l'aggiornamento sul sito destinator1.com, mi è arrivato in 24 ore, troppo simile a tom tom ma è un gran bell'oggetto, funzionasse!
Click to expand...
Click to collapse
Grazie! :wink:
This the answer of the Destinator support team:
Please follow the instructions below if you experience any problem with selecting Storage Card under 'Select Target Device' in the Installer.
1. On the original Destinator CD ROM, open a map folder, for example America.
2. Select a folder with a map you want to install i.e. USA-1etc.
3. Open the selected folder and unzip USA-1.zip
4. Sync your PDA with PC. In the root directory of your PDAs Storage Card create a folder Paradigm
5. In the folder Paradigm, create a folder with the same name as the one you selected on the CD ROM i.e. USA-1 etc
6. Copy all files from unzipped folder incl. WCE.Txt into the new folder on your Storage Card
If you have any other questions please feel free to contact us via email and we will gladly assist you.
Thank you,
Destinator Technical Support Team
They reply me in less than 24 hours, thanks a lot, fabio.
Is there is a way to delete all personal data without a hard reset?
Does anybody know were the email's SMS agenda -files are located?
yes hardreset
Rudegar said:
yes hardreset
Click to expand...
Click to collapse
thank you!
anybody else?
try sktools that allows you to remove all personal info, but why not just remove it by hard resetting? Or have you bought a phone that has software installed that you want to keep, but once you change the owners name most software will ask for code again.
to remove the phonebook go into my device using file explorer and rename pim.vol to pim.bak and soft reset then all the contacts will be removed
to remove text messages open messages and delete them all
Thanks!
..it is the easiest thing to do..
hard reset requires you to install all progies again.., yes you can make a back up .. still that's 'harder' than renaming the contacts file..
--
edit: typo
Exist an application
Exist an application, I use it, but, just now I don't remember app name and... I'm need it to!!
Mejor en español:
Existe una aplicación para borrar los datos personales, yo la usé pero justo ahora no me acuerdo el nombre y la necesito!!!
PocketOutlook Eraser
Yesss! I found the program!!! Is the "PocketOutlook Eraser" is freeware and you can download from here.
I have Igo8, official, and have inserted the SD card into my Rhodium.
It starts installation procedure, I click yes, but then I get some sort of blue Igo welcome screen, it says in the bottom right corner "starting API" and then nothing appears, and it gets back to manila home screen.
Igo doesn't appear in the "remove programs" list, but appears in the programs list - also with an entry which states "remove Igo application" and then I can only click into Igo to start it from program menus, but it says that another instance is running and closes. I just can uninstall it.
I have officially bought it but how can I make it run?
prova a dare un occhio qui...e nel sys.txt camdia sdcard con "scheda di memoria" e il nome del telefono in touch pr 2...
http://forum.xda-developers.com/showthread.php?t=501910&highlight=igo8+r3
take a look here...the info in WWE sys.txt file you have to chage is the device name: change into "touch pro 2"
If you write in english, then everybody can read it....
doktor_ppc said:
If you write in english, then everybody can read it....
Click to expand...
Click to collapse
sorry...you are right...forgotten the translation...
does it work?? please provide a feedback
Hello,
I need for work to store all my mail on the SD (text and attachments). Currently, synchronize outlook, I have problems of internal memory (tense mail> 150 Mb). I need to store the mail text in sd.
If someone helps me offer € 50
Thanks
__________________________
Hello,
ho bisogno di poter archiviare tutta la mia posta elettronica nella SD (testo e allegati). Attualemente, sincronizzando outlook, ho problemi di memoria interna (teso mail > 150 Mb). Ho bisogno di archiviare il testo della mail nella sd.
Se qualcuno mi aiuta offro 50 €
Grazie
1.- Connect your device with Active Sync or Windows mobile based device (if you have windows 7 in your PC) in order to communicate both devices.
2.- In active sync, you have 4 "folders" you may choose the last one.
3.- Then, the first one
4.- Go to electronic mail and select.
5.- In the electronic mail, choose electronic mail configuration
6.- Select all messages - HTML - all messages - Check include attachment
files and choose folders to sync.
7.- Select the folders do you want to sync with outlook.
That's all.
cidriver said:
1.- Connect your device with Active Sync or Windows mobile based device (if you have windows 7 in your PC) in order to communicate both devices.
2.- In active sync, you have 4 "folders" you may choose the last one.
3.- Then, the first one
4.- Go to electronic mail and select.
5.- In the electronic mail, choose electronic mail configuration
6.- Select all messages - HTML - all messages - Check include attachment
files and choose folders to sync.
7.- Select the folders do you want to sync with outlook.
That's all.
Click to expand...
Click to collapse
i mean this with all due respect... but how does that save to the SD card? that just explained how to sync the folders on his outlook...
favaroale said:
Hello,
I need for work to store all my mail on the SD (text and attachments). Currently, synchronize outlook, I have problems of internal memory (tense mail> 150 Mb). I need to store the mail text in sd.
If someone helps me offer € 50
Thanks
__________________________
Hello,
ho bisogno di poter archiviare tutta la mia posta elettronica nella SD (testo e allegati). Attualemente, sincronizzando outlook, ho problemi di memoria interna (teso mail > 150 Mb). Ho bisogno di archiviare il testo della mail nella sd.
Se qualcuno mi aiuta offro 50 €
Grazie
Click to expand...
Click to collapse
There is possibly one way of doing this, but you have to be comfortable with registry tweaks. I do not know how to make cabs of registry tweaks so maybe someone will be willing to do so if you are not comfortable.
The solution is simply adding a String value named PropertyPath containing the new mail directory path to HKEY_CURRENT_USER\ Software\ Microsoft\ MAPI in the Registry. This value should contain the directory on your storage card you’d like to store your synchronized mail on. The directory doesn’t need to be manually created; it will be automatically created upon the first mail synchronization
So be ready with a new folder on ur SD card and that path will be writen in the registry up top (i.e. storage card\my documents\email)
Also, to relocate mail attachments, you’ll need to also add a String value AttachPath to the same key (so same path as your email)
U can use registry edit or total commander i believe to do so (i recommend registry edit)
Just open outlook, click on Menu, select Tools -> Options on the Options screen go to the Storage tab and check the "When available, use this storage card to store attachments" checkbox.
View attachment 301836View attachment 301837View attachment 301838View attachment 301839
why don't you just store the attachments of your email onto your sd card, and let the mails themselves retain on the phone? there is an extra option for this! Or do it like i do and connect to and exchange server, and just download what you need, that is faster anyways...
Guys... he wants his MESSAGES stored on the storage card, not his attachments !! Read his post!
NRGZ28 said:
Guys... he wants his MESSAGES stored on the storage card, not his attachments !! Read his post!
Click to expand...
Click to collapse
thats what i'm saying!!!...
unless im completely misunderstanding my own self lol... what I posted above should do the trick right?
No, because there's a problem on the HD2 where it sometimes tries loading the mail before the storage card gets mounted, which breaks everything.
There are several threads just about this matter discussed these days, and no reliable solution exists so far. Search for it.
Excuse me; if you follow my steps, you'll able to storage your attachment or whatever n your storage card. I did from 2001, and always is the same, do not dude.
And that's to solve one problem, I'm not looking to get 50€, just to be helpfully, that' all.
hello,
I tried several times to make your command but does not work. I remember the similar command for WM 6.1 but for Leo don't work...why??????
Can I ask a cab file. I'm willing to give you the reward
help me
thanks
Hi,
i have a problem with my new S8: when i turn my phone in landscape mode it crashes and it returns in lock screen.
This happens with all app.
The error message in italian is "il programma impostazioni utente è stato arrestato"; in english could be "user program settings have been arrested".
Can someone help me?