O2 Orbit hang at logo !!! - P3300, MDA Compact III upgrading etc.

Please help me . i have O2 Orbit (ARTE200 ) hang at Logo .It can not boot . I have UNL file from Imeicheck.But how can i upgrade rom.When i upgrade rom , allways Invalid Model ID .I try solution upgrade rom for O2 Orbit but allways Invalid update tool .Please help me !!!

Related

Qtek 9100 reseting error

Hi i have a Qtek 9100 and i forgot the password....
I have tried all :
Update my wizard
Hard reset --> give me an error "Fat formating Failed"
Can any one give me a help ????
flash your rom again
yo i got the same phone and i need the rom if u can pls send me the rom i will deeple be greatfull thanks bc my says data craches

IT write error - Tom HTC Artemis Rom

hello
i get "it write error" after 10 minutes when i flashing phone . My phone have Cid unlock. Any ideas please? I have o2 xda orbit uk. I get this error with any rom i tryed install (Tom_ART_v2.00.01PDAVIET_CB.zip , PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap__6.2.0.7 ,PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite). only rom is working for me is art_tmouk_11311001_024990_wwe_ship.exe.
also when i tryed install HTC_1.12.405.01_026790_WWE_SHIP i get 244 error wrong id device , i tryed two solution i found on this forum but didnt work for me.
i unlocking cid by imeicheck
please help me
thanks

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

My JAM write " No GSM" in the splash screen

after upgrading my JAM i got this problem " No GSM" and when the device start on windows ,, i got no phone function at all , like no radio rom inside , i tried to insall a new Radio rom , but i got upgrade error 114
Any one can help ? PLZ
Hi if i were you i'd download the official JAM Rom from Club IMate. go into bootloader mode (by pressing camera + Power + reset) and load the original Jam Rom the latest WWE Rom from club I-Mate is 1.12.
Hope this helps.
Thanks for ur fast reply .. but i already download it and try to update the official rom to my Jam but it stop and give me Error 114 and some time Error 150 and nothing go on
if i delete the radio file from the rom , it works fine and go on
Thanks
U need to go to service center , because i have the same problem and they told me i need to change the whole mother board for fixing this problem

VODAFONE PDA1605 Image corrupt during rom update plz help me>>?????/

i have vodafone PDA1605. i try to update with orignal htc tytn windows 6 rom after one % it says inviled verder id & device restart. after restart after displaying vodafone logo & windows logo screen goes white. i try so many things after that. i try vodafone orignal rom (HER_VODA_1201616_1030600_UK_SHIP) when first start to update with this rom it displayed pocket pc rom ver. when i try next to update this ver with same ver(HER_VODA_1201616_1030600_UK_SHIP) error message displayed check your cable or pda (message no. 260) but when i try 2 update with Tytn win 6 rom. its woking but only one % & message displayed inviled vender id. i try to update spl & radio ver but displayed your image corrupt.
my device IPL-1.00
SPL-2.03
plz help me if some one know's ?
i get that same and i'm with VF it because the phone is locked i think, well thats what i was told

Categories

Resources