There's any way, to boot Linux on QTEK S200?
Regards, Guillem!
guillemhs said:
There's any way, to boot Linux on QTEK S200?
Regards, Guillem!
Click to expand...
Click to collapse
It is possible, but the the kernel is very incomplete.
http://linwizard.sf.net
Related
I have tried all the WM Eng ROMs in my Qtek1010 none of them seems to be stable on my device.When I press Power button to switch on it make SOFT RESET.Still could not find the solution to this,so I need to roll back to my Qtek 1010 ROM.
Can I Install the official ROM back agian?
Which method is safe SD card Flashing or Active Sync?
I also need the Official Boot Screen
I did not have backup of Qtek 1010 2002 ROM
Please help
Re: Need Qtek1010 Official ROM 2002 Rolling back from WM 200
mushtash said:
I have tried all the WM Eng ROMs in my Qtek1010 none of them seems to be stable on my device.
Click to expand...
Click to collapse
Did you try cooking your ROM using Lumpistefan Kitchen? http://lumpistefan.dyndns.org/
Still could not find the solution to this,so I need to roll back to my Qtek 1010 ROM.
Click to expand...
Click to collapse
Did you try hard reseting your XDA? Would it help ?
Which method is safe SD card Flashing or Active Sync?
Click to expand...
Click to collapse
I have found that SD flashing using an external SD card reader worked 100 %
I also need the Official Boot Screen
I did not have backup of Qtek 1010 2002 ROM
Click to expand...
Click to collapse
Cook from Lumpystefan kitchen it has it all.http://lumpistefan.dyndns.org/
Thanks Tanguy for reply.Yes I have cooked almost all Eng WM 2003 ROMs from Lumi Stefan kitchen.After Doing upgrade I did hard reset.But still the same.
Is it my power button gives problem or the OS.I never had problem OS 2002.
Now i have tried O2 4.01.12 Eng ROM same Problem.
try this site
check this site:
http://www.yorch.net/upgrades.htm
Qtek1010 ROM with Boot screen
Can anyone help me to locate Qtek 1010 2002 ROm with Qtek boot screen.In rom kitckens there are all for O2.i only need to replace my cooked boot screen of O2 need to change this.
Re: Qtek1010 ROM with Boot screen
mushtash said:
Can anyone help me to locate Qtek 1010 2002 ROm with Qtek boot screen.In rom kitckens there are all for O2.i only need to replace my cooked boot screen of O2 need to change this.
Click to expand...
Click to collapse
Added Qtek Bootimage of the 3.16.13 Rom to the kitchen.....
(this rom was already in the kitchen.....)
Added the bootimage to download. You can change it manualy at xour device, using the
pnewbmp
Click to expand...
Click to collapse
command from the is utils http://xda-developers.com/~itsme/download/itsutils.zip
HTH
Stefan
How to use Bootimage file and itsutils.zip file.I have downloaded both now how do i change boot screen of Qtek 1010 to official boot screen
Thanks
mushtash said:
How to use Bootimage file and itsutils.zip file.I have downloaded both now how do i change boot screen of Qtek 1010 to official boot screen
Click to expand...
Click to collapse
Have you ever tried the search button?
Take a look at http://forum.xda-developers.com/viewtopic.php?t=8017&highlight=pnewbmp and / or http://forum.xda-developers.com/viewtopic.php?t=6679&highlight=pnewbmp
Stefan
This is the original rom for Qtek 1010 with Pocket PC 2002
Try this!
http://www.qtek.nu/files/qtek316.zip
This is the original rom for Qtek 1010 with Pocket PC 2002, but with a newer ROM version.
Otherwise : www.qtek.nu (Homesite of Qtek in Swedish)
Olli Power 8)
Original Qtek 1010 2002 ROM (3.18.04)
I have the English 3.18.04 ROM from Qtek if you don't find a solution let me know & I'll upload it for you.
confused about rom versions. Is 4.01.16 newer than 4.00.21 ?
also, t-mobile told me it was the 2003 upgrade with this rom RUUv2.07_CEv4.01.16
that is causing my sd card to get erased and that there was nothing I could do and that I couldnt even go back to 2002. Are they jacking with me or what?
I see this site : http://www.yorch.net/upgrades.htm has rom version
Pocket PC 2002 RUU 3.14.40
and Im wondering if this will put me back to 2002 without the sd problem.
You can roll back to the 2002 ROM. I've done it successfully with my SD.
Thanks, ill give it a shot.
mushtash,
did you manage to fix your soft reset problem with a software upgrade. i posted a while back about this and i was told it was a hardware issue. i tried several roms from the kitchen. the 309 siemens one *seems* to make it do less soft resets
Greets.
I have copied the ROM of a 1010 from a buddy that is protected with a key - presumably the key is cooked into the ROM using a unique device identifier. I've used Jeff's toolset to copy the ROM and create an SD image which i then loaded onto my Qtek.
The thing hangs on the boot screen now and won't go any further.
Any suggestions as to how to get around this?
woodae said:
Greets.
I have copied the ROM of a 1010 from a buddy that is protected with a key - presumably the key is cooked into the ROM using a unique device identifier. I've used Jeff's toolset to copy the ROM and create an SD image which i then loaded onto my Qtek.
The thing hangs on the boot screen now and won't go any further.
Any suggestions as to how to get around this?
Click to expand...
Click to collapse
This may be a problem of the Romspace used for this ROM. It uses also a "free region" that was used before for the permanent save.
The unique device identifier is also a problem. Until now i do not know how this key is build and where it have been integrated in the ROM......
As much as i know it's just udeless this ROM...
HTH
Stefan
Thanks for the reply
Its a pity!
Do you know where i can get an alternative WM2003SE ROM for the 1010?
woodae said:
Thanks for the reply
Its a pity!
Do you know where i can get an alternative WM2003SE ROM for the 1010?
Click to expand...
Click to collapse
No. not until now..... :-(
Stefan
Q TEK 1010
Hi Stefan,
Kindly help me to restore my radio version on qtek 1010, I live in kuwait. I upgraded it alongwith sf56 wm 2003, and it does not work here. Thanks
I bought a MDA Compact here in Germany but I do not speak any Deutsche I have seen so many post about this procedure but none of them make me feel very comfortable.. What is the simplest\easiest way for me to convert my Compact into English instead of German?????
PLZ help me soon because I am going crazy over here!
Dre
You must be in the military :lol: No kidding, just got myself two MDA Compacts and successfully converted them into iMate Jams. I work at Ramstein. Mail me at [email protected]
hahaha
Of course I am in the military! Who else would be silly enough to live in a foreign country and not try to learn the local language...hahahahaha. I'll email you soonest, thanks.
Anonymous said:
You must be in the military :lol: No kidding, just got myself two MDA Compacts and successfully converted them into iMate Jams. I work at Ramstein. Mail me at [email protected]
Click to expand...
Click to collapse
I recommend that you use the T-Mobile English ROM as that has better sound than the current Imate ROM.
T-Mobile English ROM??
Where do I get this??
Re: T-Mobile English ROM??
drepierre said:
Where do I get this??
Click to expand...
Click to collapse
http://www.nowicom.com/dl/mda_compact_upd_en_1.zip
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=1
Instructions aren't very well written.
hmmm
why does the extracted file read as "magiciandeutsch.nb1"??? is this correct if i am trying to flash to english???
Re: hmmm
drepierre said:
why does the extracted file read as "magiciandeutsch.nb1"??? is this correct if i am trying to flash to english???
Click to expand...
Click to collapse
Is that the file you extracted from your PDA or fro the Zip file.
There should be an English one in the Zip file too.
Re: T-Mobile English ROM??
27 said:
drepierre said:
Where do I get this??
Click to expand...
Click to collapse
http://www.nowicom.com/dl/mda_compact_upd_en_1.zip
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=1
Instructions aren't very well written.
Click to expand...
Click to collapse
i followed the instructions to the letter 'almost' and it still does not work for me. ntrw command says that the .nb1 file is not on the sd card. i am using a panasonic 512mb card. any suggestions?
Re: T-Mobile English ROM??
drepierre said:
27 said:
i followed the instructions to the letter 'almost' and it still does not work for me. ntrw command says that the .nb1 file is not on the sd card. i am using a panasonic 512mb card. any suggestions?
Click to expand...
Click to collapse
Try your card again in the card reader. See if you can read and write to it.
If that stills works, start again.
Click to expand...
Click to collapse
T-MOBILE GERMAN TO ENGLISH
Hi There!
I am very new to this but happened across this post.
Model No: PF2OB
Operator CODE: T-Mobile
Language code: GER
ROm Version: 1.06.01
Extended ROM-Version: 1.06.122
Radio Version: 1.00.00
I have a MDA III, Will this work for me too??
card does work in computerr and my pda but not with this procedure. am i forced to use the jam rom now?
drepierre said:
card does work in computerr and my pda but not with this procedure. am i forced to use the jam rom now?
Click to expand...
Click to collapse
If it still works, try formatting it and starting again.
Still not working.
I have been formatting with my PDA but last night I formatted with the built-in reader in my laptop and the process still did not work.
Re: Still not working.
drepierre said:
I have been formatting with my PDA but last night I formatted with the built-in reader in my laptop and the process still did not work.
Click to expand...
Click to collapse
Are you sure you're doing the process right?
Re: T-MOBILE GERMAN TO ENGLISH
STODAD said:
Hi There!
I am very new to this but happened across this post.
Model No: PF2OB
Operator CODE: T-Mobile
Language code: GER
ROm Version: 1.06.01
Extended ROM-Version: 1.06.122
Radio Version: 1.00.00
I have a MDA III, Will this work for me too??
Click to expand...
Click to collapse
This ROM wo't work on the MDA III. Only on the Magician.
same problem with sd....
I have the same problem - the ntrw returns "Unsupported media type" - works fine in card reader...
I am doing the procedure
Attached is a screenshot of my DOS window after I run the "ntrw German.nb1 e:" on my 128MB card and then my 512. I formatted both of them with my laptop but I formatted the 128 as FAT and the 512 as FAT32...HELP!!!!!!
IT WORKED!!!!!!!
I was using an older version of ntrw...I am up and running in English now. You guys are awesome!
Re: same problem with sd....
tppp33 said:
I have the same problem - the ntrw returns "Unsupported media type" - works fine in card reader...
Click to expand...
Click to collapse
What version of ntrw are you using?
1.0 or 2.0?
Get the 2.0 from the FTP
ftp://forum.xda-developers.com/Magician/NTRW 2.0/
i have a Tmobile MDA mini with firmware
(test only not for sale) when i boot the phone this msg appears??
ipl 1.12
spl 1.12.000
gsm 01.12.20
os 1.12.2.21
so the os is windows mobile 5.0 but in german any help how to change it to english ??????
thx
deepdark said:
i have a Tmobile MDA mini with firmware
Click to expand...
Click to collapse
That's fine. Better than without!
deepdark said:
(test only not for sale) when i boot the phone this msg appears??
ipl 1.12
spl 1.12.000
gsm 01.12.20
os 1.12.2.21
Click to expand...
Click to collapse
Don't know, I can't see the message on your device.
deepdark said:
so the os is windows mobile 5.0 but in german any help how to change it to english ??????
Click to expand...
Click to collapse
Really? A Magician with WM5.0? Can you please dump that ROM?
For real: If you want someone to help you, please give all information that is needed therefor. And this information should be correct. For example: I never heard of a "MDA mini".
I can only guess: If you have a "MDA compact", this would be a Magician with WM2003SE. If you have a "MDA compact II", this would be a Charmer with WM5.0. Please use the search of the board to find out what to do and then download the ROM you need from the ftp of this site. ROMs are available for different devices, companies and languages. So be sure to know your device!
Seriously, you aren't helping yourself by posting all over the place. Use the bottom reply button. If you were to post more, I won't have suggested you to flash your phone as you don't seems to able to handle a forum function well enough (e.g. differenciate New Thread and Post Reply).
The page is not helpful too (not in english). And you should not do any dangerous flashing before you even know what you are doing.
The qtek 8500 is a StarTek(-ish?) phone which has really no similarity with your phone (Magician or Charmer).
Anyway, for there is a case of killing a Charmer with wrong ROM and since now, there isn't a know possible way to revive it. You should be prepared for the worst.
For others who are confused, refer to posts by deepdark
http://forum.xda-developers.com/viewtopic.php?p=324648&highlight=#324648
http://forum.xda-developers.com/viewtopic.php?p=325266&highlight=#325266
http://forum.xda-developers.com/viewtopic.php?p=325408&highlight=#325408
thx
so what about Magician i have one if them but i want to install a windows mobile 5.0 is that posibble??
plain and simple: no it is not (afaik)
Re: thx
deepdark said:
so what about Magician i have one if them but i want to install a windows mobile 5.0 is that posibble??
Click to expand...
Click to collapse
Why is it so hard to read?
Unauthorized said:
Please use the search of the board to find out what to do and then download the ROM you need from the ftp of this site. ROMs are available for different devices, companies and languages. So be sure to know your device!
Click to expand...
Click to collapse
... and write?
deepdark said:
so the os is windows mobile 5.0 but in german any help how to change it to english ??????
Click to expand...
Click to collapse
I am eager to change my charmer to a linux pda.
Is there any such rom ?
THX~
no, there is no linux for charmer.
Thank you