Hi,
could i change the boot screen of my Trinity ?? I'm not very able to do it
wishmaster82 said:
Hi,
could i change the boot screen of my Trinity ?? I'm not very able to do it
Click to expand...
Click to collapse
Yes, it would be nice to know how. Some fellas in the HTC Wizard forum released a utility to do this for the Wizard, hoping someone would do the same for Trinity.
What would be nice though is being able to change both the HTC bootscreen and the Windows Mobile one too.
You can change the windows mobile screen... same trick for all wm5 devices, search the forum.
You can't change the splash screens (htc logo) because trinity's bootloader only allows signed code to be flashed...
pof said:
You can change the windows mobile screen... same trick for all wm5 devices, search the forum.
You can't change the splash screens (htc logo) because trinity's bootloader only allows signed code to be flashed...
Click to expand...
Click to collapse
Yes, of course, but I'm sure some talent go-getters are going to find a way of unlocking the bootloader at some point.
Thanks for the info regarding the Windows Mobile one, I guess it's just welcomehead.96.png in the \windows\ directory.
Related
Hello People,
I currently have a O2 XDA Exec with Windows Mobile 5 on although I was wondering if it would be possible to install Pocket Linux on a SD memory card and boot from that as my OS???
Do I need a bootloader saying which OS i will boot from? and is their such as thing out thier as a boot loader for Pocket Pc?
Please could someone explain if this is possible.
Thanx
Danxx6
danxx6 said:
Do I need a bootloader saying which OS i will boot from? and is their such as thing out thier as a boot loader for Pocket Pc?
Click to expand...
Click to collapse
You start a program named haret
http://wiki.xda-developers.com/index.php?pagename=HaRETDownloadSite
it loads linux kernel from SD into RAM, kills wince and starts linux.
We are working on linux for the HTC Universal
http://wiki.xda-developers.com/index.php?pagename=UniversalProgress
but the LCD is not yet working properly.
Running Linux on a similar phone (HTC Blueangel) is described here
http://handhelds.org/moin/moin.cgi/BlueAngel
Thanks for information, sorry I cannot help Im only just learning vb.net programming with WM5.0 SDK so I not very experienced.
Will your first option work on XDA exec as it been tested?
Dan
Hi all. I'm trying to assign a button to "Device Lock" for my PPC (HTC P3600) and cannot find it in the PPC? You know, the button that locks the device keypad. I current have the Device Lock plugin that i am . I looked for it in Windows folder but had no luck. Maybe I am missing something. Can someone please tell me the path? Thanks.
Never mind. I downloaded the Device Lock.cab
Default HTC Device Lock path???
Actually Device Lock.cab from someone does not work sometimes. So, does anyone knows the path for the default HTC Device lock path in the Device? I looked in Windows folder but had no luck finding it. Can someone please tell me where is the path for it? You know. when you want to lock the button of the device you click that and then an option to unlock shows and then I have to click the screen to confirm unlock. So, I am looking the path for it? Thank you.
I installed an old keyboard file and it is trying to load when the windows starts. This can't be done and my phone is stack after with HTC logo I have windows mobile v6.1! Is there any way to backup up my contacts/RAM with any way? Is it possible to baypass the startup sequence using a keyboard combination?
Something I can do with tri-color screen?
thanks in advance
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
you need to install it
Chanaka said:
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
Click to expand...
Click to collapse
its available as a cab file
Make sure it is enabled.
Start->Settings->Today->Items
adamo86 said:
its available as a cab file
Click to expand...
Click to collapse
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Not available on today items
JaWe said:
Make sure it is enabled.
Start->Settings->Today->Items
Click to expand...
Click to collapse
It is not available on today items
Items available on today items are
Date, Windows Live and Windows Live Search
i have it as a cab file
Chanaka said:
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Click to expand...
Click to collapse
i have the file on my shift i will need your email add i send it to u
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
could you send me it to [email protected]?
Many Thanks
Snapvue black screen
Hi, I am newcommer in Htc x9000, and I do hard reset to unlocked it, but now my snapvue become dark/black screen.
Any body can help me?
Thanks.
Follow this link, it helped me
http://www.pocketables.net/2008/05/how-to-hard-res.html
Dead snapvue, need help
Thanks for your inform, but I already did hard reset (ecshift -bl, mtty_0513_test and task 28), but the snapvue screen still blank/dead.
Any another way?
Thanks
hi there, adamo86.. can you please send me too the cab file for the htc shift i do have the same problem..here's my email: MOD EDIT: REMOVED EMAIL thank you very much..
please help
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
sancharhari said:
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
Click to expand...
Click to collapse
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
help me
adamo86 said:
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
hi thanks for your reply,
I am having htc shift clio200 (x9000) cdma whatever is the model. I was trying to program it for my cdma network. I done almost everything and program it. I didn't find the hard spl for cdma device and rom for cdma shift. after some research I find somewhere that if I will make clear storage then I can get flash any shift rom which is not having radio image. so I clear the storage.
after that snapvue side gose black
I have done the process below
by doing f3 hardreset my shift installed fresh windows vista
shiftec.exe -bl
then task 28 with mtty
all sucsuss but still nothing
its still black. I can still go to bootloader mode
please help me how can I get my snapvue works
please help
I'm not sure how you get snapvue back. However I have these two files
The first file is to liberate shift
The second is the shift*pack
Sent from my C6903 using Tapatalk
Did you go to ShagCtrlCenter and try to reset SnapVue in advanced settings?
If you haven't already liberated your Shift i don't know how to reflash WiMo Side.
If you can set it to bootloader mode it would be worth trying to do so.
Did you also hardspl and all this stuff?
Files can be found here:
http://forum.xda-developers.com/showthread.php?t=1928501
(If this answer in any way may have been useful to you, don't hesitate to press "Thanks"button )
Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.
Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)
Oberoth said:
Is the USB-Switch mode also included, because i'm stuck in Diagnostic Mode and it would be great...
Can i flash it with my European unbranded device?
Is there a Version-Controll?
because i have currently the 1.60 ROM installed...
thx.
Tried it but said not for my device... (after 1% flashed)
Click to expand...
Click to collapse
i think you need to use goldcard to flash it.
damn...
i don't have goldcard, nor an y-cable to make one :'-(
chance for SSPL in near future?
downloading now , hope to get my goldcard working , last time it didn't work
i must wait till next week to build a Y-Cable
could you tell me if it works and if there is the USB-Switch-App in the ROM?
thanks
xboxmod said:
i think you need to use goldcard to flash it.
Click to expand...
Click to collapse
Hi,
You can not do it with GoldCard. First of all, you must have xxx.nbh file to use a GoldCard. ROM from first post does't have.
Regards
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
is that means.. now your phone has turn into ZUNE mode
back? Series? How? Do you mind to tech me on this?
I've download everything needed.. only need to build my own Y-Cable.
Appreciate your share.
Thanks~
No...
the needed app isn't in the main menu...
xboxmod (by the way... great thanks from me) and i are trying to open theese files because they are indeed in the rom....
Oberoth said:
it does work...
i did it...
you need to extract the exe using WinRAR...
then there is your .nbh file...
Click to expand...
Click to collapse
Oh, really. Check once again !!
xboxmod said:
Hi
i'm working on hd2 rom and after dump a schubert test rom.
i have notice this one contain a lots of usefull tools.
RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_TEST
This rom contain kitl tools allowing connection to remote tools framework
a part of Windows Embedded Compact 7 developper tool.(with registry editor and more)
sirep server allowing connection to.
also a tool to test all device sensor.
and a tool to see touchscreen raw data and more...
Maybe use this rom can help dev to find more.
you can also flash this rom with goldcard if your device is not unbranded.
i don't have HD7 Device so i can't help you with this.
Click to expand...
Click to collapse
At last... I've successful flash my devices using this ROM and Goldcard.
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
It's was really hard to find the single micro memorycard reader in my place.
I already try to use the multi/all in 1 mmc reader.. it wont work to
flash using goldcard technique because it seems like the phone keep searching
which one it should read from. so i manage to create my goldcard using flash
thumbdrive 4GB. and it works perfect with me. So now.. I have no worried to
flash any rom. except it was not develope for WP7. lol~
AzmanIshak said:
But to switch it back from DIAG to ZUNE, as you've said.. the USBtool.exe
has to be execute manually. I just wait maybe someone could found it how.
Click to expand...
Click to collapse
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...
Oberoth said:
I'm talking to some developers to get enough information to get back into Zune Mode...
will make a thread when its done...
Click to expand...
Click to collapse
Wohooo.... serious nice. cant wait...
Please let me know when you've done.
thanks!
were you able to resolve this?
if it does not have the needed mode switcher app, can someone kindly create a custom rom with the needed app(usbmodeswitcher.xap)
Thanks
the problem is that we cannot flash that rom until we have HSPL or SSPL...
no chance to resolve the problem yet :-/
DF Router
can anyone build rom for HD7 with preinstaled "DF Router" app?
I changed usb mode to modem and I uninstalled this app, now i can connect to zune and install it again
am now in "modem mode" and i need back to "Zune mode"
more info about DF Router problem
answers.microsoft.com/en-us/winphone/forum/wp7-sync/any-solution-for-damaged-windows-phone-via-df/2109119d-0259-448a-9162-73ea1a7eed3a?tm=1308688395627
Hi.
The only way => back to repaire.
or try to flash it ....
now i have succesfull flashed this rom via goldcard.
but i still stuck in diag-mode, so i cant still connect via zune, is there already a solution for this problem??? =(
greetz nOoG
The good news first: We now have RSPL/HSPL (thanks to Cotulla and DFT)
The bad news: Nobody made a ROM which contains the USBSwitch-App :/
I hope that will change