Hi,
I have a HTC p3600 and want to connect it to my Mercedes Bluetooth-cradle.
Before I bought the phone I thought it is no problem, because it has SAP-Support. Now I had to see that it is a problem. The cradle doesn't find my phone!!!! Does anybody have an idea why it doesn't work???
Some registry-entries?? A wrong phone-name?? A general problem???
THX
mts said:
Hi,
I have a HTC p3600 and want to connect it to my Mercedes Bluetooth-cradle.
Before I bought the phone I thought it is no problem, because it has SAP-Support. Now I had to see that it is a problem. The cradle doesn't find my phone!!!! Does anybody have an idea why it doesn't work???
Some registry-entries?? A wrong phone-name?? A general problem???
THX
Click to expand...
Click to collapse
I'm sure that you already checked all the settings on you bluetooth like "make discoverable" etc.?
yes.
But is the name important?
Mybe there is something that I have not checked, but I don't know what's important.
mts said:
yes.
But is the name important?
Mybe there is something that I have not checked, but I don't know what's important.
Click to expand...
Click to collapse
Have you used the Mercedes BT successfully with another device? Have you forced the phone to look for other BT devices?
I was at mercedes to check the cradle before i'll buy it. I hadn't to much time to check everything.
Have you forced the phone to look for other BT devices?
Click to expand...
Click to collapse
no, the mercedes-guy told me that I will not find the cradle. I used the internal bluetooth of the car to test if my mobile is visible (it is).
I have read some other posts (of another device) where the car doesn't find the phone because it is a PDA and no mobile. Is it possible for this device also?
Is there anybody who is using SAP successfull with the trinity?
EDIT:
Now I have tried this:
http://forum.xda-developers.com/archive/index.php/t-274226.html
but I can't edit my registry. It always says "Zugriff verweigert" (in English: "Access denied").
Now I have tried another registry-editor. It allows changing the value, but after a softreset the old values are back again.
Related
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Mr-Sale said:
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Click to expand...
Click to collapse
Go to your extended ROM >>> see if there is a BT.cab there, and of so run it. Otherwise you may have to reflash the ROM. Maybe others will advise differently.
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
BT
Mr-Sale said:
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
Click to expand...
Click to collapse
en
Given we are using the same ROM version (Sin's merged), then I think the drivers are there but it sounds as thought the icon (BT_Icon.cab in the ROM) may be missing. What you could do is download BTH Tools v.1010 from XDA-Developers ... I found it yesterday by doing a search. This is installed from a PC and may help you get it going. It is not a BT engine, merely a means of activating/deactivating BT and it shows which battery is in use as well.
I have a weird one as well in that my BT works well in connecting with a laptop computer, but when I use it with a Plantronics M3000 BT earpiece, I have to re-do the connection the hard way (i.e., pair the damn thing) after every time the XDA II is suspended. I don't think it is the Plantronics device (which is a piece of ****e in my experience) alone .... will sort it even if I have to buy a better BT earpiece. Maybe others have some advice??
Hi friends I am using ORange SPV3100 device[Hermes] I got a nokia bluetooth headset, but I could not able to use it as my device couldn't able to find it. I dont know what things I need to do to get this accessory work for me. I am helpless as there is no guide available for this problem. My Device supports BT 2.0 with A2DP. Which company headset works best with this phone & anything more. Thanx
Saksham Katyal
You might wanna post this in the HERMES ACCESSORIES forum?
Junner2003 said:
You might wanna post this in the HERMES ACCESSORIES forum?
Click to expand...
Click to collapse
Sorry in a hurry I forget to put it in a right place. I did search & found most of similar queries posted here. Any moderator can do that for me. Any solution about my problem?
Usually you have to set the bluetoon headset device to pairing mode, then you phone can find it.
how to do that will very from device to device. You need the manual or call Nokia about it.
If you already did that double check to make sure you did it right. If that not it, I dought any of us are going to know how to fix it. Return/excannge get a different device.
Good luck...
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
bazza1603 said:
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
Click to expand...
Click to collapse
Ford's probably using stereo bluetooth for its connection. You need to enable your phone with A2DP first, then do the pairing. I have had good luck with the Tornado version of A2DP for the Wizard, but only after I overclocked my phone's processor, and made some minor adjustments to the data rates at a registry level.
If you're a noob, you need to do a LOT of reading before trying this, or you'll lose your ability to generate sound altogether. Not as dramatic as bricking your phone, but makes it almost as useless...
Just search these boards, the answers are here. Search.
...and welcome to the XDA Dev boards!
Hi,
Thanks for the reply..was just starting to look at New phones!
My current Rom is 2.21.4.1.WWEwhich is the latest O2 one.
Rom Date3/9/06
Radio 02.07.10
Which Rom would people recommend updating to?
Regards
Barry
...the worm turns.
bazza1603 said:
Which Rom would people recommend updating to?
Click to expand...
Click to collapse
Normally, this is where I say, "Start a new thread, for this new question, because nobody is going to open this thread to answer that question."
However, you've asked a question that usually results in the person asking being lambasted (read: flamed) for asking a question that is, in most cases, a matter of total opinion. As has been said many times before, about this subject:
What's best for you isn't what's best for (nearly) anyone else.
Click to expand...
Click to collapse
So....that said, I recommend you look at the Wizard Mobile 6 boards, read the Wizard wiki THOROUGHLY, and know your phone very well before you even consider trying to load a cooked ROM, or you will have an expensive paperweight instead of an incredibly useful tool.
Whatever you do, please do not post a question like "What's the best ROM for me?" because only YOU can answer that question, and only after you educate yourself to what's possible, and what your specific needs are.
If you just want to sync your phone to your car, then stick with the A2DP upgrade, and an overclock (OMAPCLOCK via SmartsKey is my preferred method of overclocking). That's my advice, free of charge.
Could anyone help me find a A2DP upgrade. I have honestly hunted, but I am getting confused...
Tried Torbado A2DP without success. I run a 02 Mini S
Regards
Barry
Hi
I have got Stereo headset now showing, but its greyed out for the radio device?
Anyone got any ideas?
Regards
Barry
I would highly recommend looking at JETWare BT Extenstion. It adds a lot of functionality that MS left out of the BT stack.
http://www.jetwaremobile.com/
Hi,
Got it working....
With other phones they were pairing automatically. If you search from the radio
Phone >menu then search, after a long wait it finally pairs...
Installed http://www.jetwaremobile.com/ which may have helped...
Thanks for everyones help.
Regards
Baz
I'm using Bluetooth serial communication. With the new HD2, HTC shipped their own BT stack. Every time I open the serial port, a popup appears to choose the desiered remote serial port. I never got this on my old wm phones. The port is already mapped in the HTC BT software. Why is it asking every time I open the port? Has anybody noticed this too. And is there any workaround for automate this, like it was in the good old MS BT stack?
Please have a look at the attached screenshot.
anybody has an idea?
Hi,
I got the same problem, everytime I start iGO8 witch wants to connect my TMC receiver the popup appears. very annoying. Did you ever solve the problem?
TIA
Cheers
/Cacti
Same problem here. I sent a request to the HTC support today. Damn WIDCOMM Bluetooth-Stack.
No, I didn't found a solution.
I don't think thats a Widcom stack.
I got a reply from the HTC Support today. They told me that this behavior is windows mobile specific.
I thought a bit about the problem. If we knew where the routine is which displays the window, we would be able to modify it to always use comN and close the window. Does anyone have a clue where we could find it?
Fighter125 said:
I got a reply from the HTC Support today. They told me that this behavior is windows mobile specific.
I thought a bit about the problem. If we knew where the routine is which displays the window, we would be able to modify it to always use comN and close the window. Does anyone have a clue where we could find it?
Click to expand...
Click to collapse
I found that name of program that displays dialog is \Windows\BTTrayCE.exe but i did not found any file or register place where to possible somehow set up it. :-(
O.
Fighter125 said:
I got a reply from the HTC Support today. They told me that this behavior is windows mobile specific.
I thought a bit about the problem. If we knew where the routine is which displays the window, we would be able to modify it to always use comN and close the window. Does anyone have a clue where we could find it?
Click to expand...
Click to collapse
I think that HTC isn't telling us the truth. I own serveral WM devices. They all come with the MS bluetooth stack and none of them had this popup screen. I heared that HTC build their own BT stack.
lopez1_de said:
I think that HTC isn't telling us the truth. I own serveral WM devices. They all come with the MS bluetooth stack and none of them had this popup screen. I heared that HTC build their own BT stack.
Click to expand...
Click to collapse
Hmmm that is nice... i try to contact by telephone people from HTC CZ Support today, to find solution with them, expect that they will help. in about information in BTstack is not described who is manufacturer.
The HD2 has the Widcomm (later called Broadcom) stack.
I had a small problem with my foldable bluetooth keyboard, but that has to do with the driver of the BT keyboard.
Yesterday I paired a car kit (some chinese mp3/without any problem. Not tried to pair other devices yet.
i think that this is problem of some dynamic library that BT is using. btw. what is version of your bt? i got Ver. 1.9.3 bulid 500 HCI ver 4.168 and LMP ver. 4.16919. So i asked HTC second time for help with this. will see
I have got the same BT Version.
Did HTC respond to your question?
If this all doesn't help us, i will write a program which connects tmc and starts navigation aftwards. I am trying to get information on this bluetooth programming stuff.
hmmm not yet will see tomorrow
Same version here.
so HTC replayed! nice now we know that they know, hope that this is start how to solve this problem. unfortunately how i know these companies, it will be not early :-(
Dear Ondrej, Thank you for contacting us. In regards to the pop up message on HTC HD2: It is not possible to remove this pop-up (We don't support editing the registry it will breach your warranty). I will escalate the issue to the HTC Head office. Please do not hesitate to contact us again if required. Thank you for contacting HTC. Best regards, Bo K
Click to expand...
Click to collapse
Did anybod find a solution to this problem yet?
Hi all, the Pioneer SPH-8TAB-BT is brand new and decided to open a topic about it.
First issue I have that there is no call-out button in the software, while if I am dialing a number on my phone, there is a screen that shows who I am calling.
Second, is there any other FM app that could work. The stock one is too ugly.
I found out voice dialing works if you update PSS in the Google Play Store, but there is no Bluetooth dialer app yet
hjdevries said:
I found out voice dialing works if you update PSS in the Google Play Store, but there is no Bluetooth dialer app yet
Click to expand...
Click to collapse
Would be better to ask in a Pioneer forum.
The unit you got is too seldom at XDA. Seems that this is a real tablet just with a connector to the head unit.
No one knows what´s in there.
hjdevries said:
Hi all, the Pioneer SPH-8TAB-BT is brand new and decided to open a topic about it.
First issue I have that there is no call-out button in the software, while if I am dialing a number on my phone, there is a screen that shows who I am calling.
Second, is there any other FM app that could work. The stock one is too ugly.
Click to expand...
Click to collapse
Look at it, maybe there will be explanations. https://youtu.be/i6-ybPcwWMg
rigattoni said:
Would be better to ask in a Pioneer forum.
The unit you got is too seldom at XDA. Seems that this is a real tablet just with a connector to the head unit.
No one knows what´s in there.
Click to expand...
Click to collapse
Yes, it just got out on the market!
sun.valeo said:
Look at it, maybe there will be explanations. https://youtu.be/i6-ybPcwWMg
Click to expand...
Click to collapse
Thanks, had a look. I played around for hours so nothing new.
But I had contact with Pioneer:
A) No DAB+ support
B) Bluetooth dialing and use Phone COntacts list will come in a couple of months
hjdevries said:
B) Bluetooth dialing and use Phone COntacts list will come in a couple of months
Click to expand...
Click to collapse
Seriously??? You are kidding us, are you?
A car device without phone call possibility???
I would send this bull**** back wherever it comes from.... sorry, but this is not acceptable.
Just mounting a tablet on some mysterious radio without necessary functionality is not ready for sale.
OMG...
I agree, but other than that the device is great.
Anybody here who already has the device?
Update
I have the same model Pioneer has brougt an update on their site go to pioneer and go to software and type you're model nr to download the file unpack it to a usb drive so now you have the Cal function you have to update the pioneer sync app on the tablet and need a usb stick wit the download file plugged in to the system
Kevinjumpy said:
I have the same model Pioneer has brougt an update on their site go to pioneer and go to software and type you're model nr to download the file unpack it to a usb drive so now you have the Cal function you have to update the pioneer sync app on the tablet and need a usb stick wit the download file plugged in to the system
Click to expand...
Click to collapse
Thanks, how is your overall experience so far?