i just wanna know if you guys use protective plastic sheets on your screen or not? Is it really necessary? will the screen become scratched and ugly if we use the stylus directly on it? thanks for any opinion.
It's recommended to use screen protectors to avoid micro-scratches. I've got Brando UltraClear since I've bought my TyTn and it took 2 days for me to realize there's a protector on screen It's perfect, doesn't affect quality of display at all. Also it's easy to remove and washable
excuse my ignorance, but what is that u are using, since I cant fint anything useful and interesting in my country? thanks
i recommend using the screen protector as well. it's not just for protecting the screen from any scratches with the use of stylus but the screen will always be protected from any other close contacts while you keep the device in your pocket or in a case. the display is one of the most expensive parts of your hermes and you will regret not protecting it when a time comes for you to replace it for any serious scratches.
WriteShield and Martin Fields are very good too. Of course you could read this thread http://forum.xda-developers.com/showthread.php?t=273926
I first used the Brando Ultra Clear - wich is really very clear, friends asked me why I do not use a screen protection until I told them to have a (much) closer look!
Brando Ultra Clear is available on ebay cheaper as in the brando shop.
When I bought my car holder I wanted to have a screen protector that is more anti-reflective. This is why I now use a 3M ARMR200.
The ARMR200 is really great, cause it's the only screen protector wich is two times coated and almost non-reflective.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought it on ebay where you get it right cutted for the Hermes. I don't know if it's also available in other countries on ebay. If you don't have a problem to buy it on german ebay search for "ARMR200 trion" cause the Hermes is sold here as "O2 Xda trion" for example. You'll find many results. E.g. this one
Thanks guys. I am using a standard one, which is not very clear and also gets dirty and fingerprinted very easy. I will check the availability of what u suggested in my ****ty country.
JavoEdge has been great for me. The have an Ultra Clear and a anti-Glare. I use the anti-glare because it hides all the fingure prints and you can view your screen better out side in sunlight.
By the way you can take the screen protector off and wash it with water and put it back on good as new, i tried this and it actually worked.
These screen protectors are hard not soft and flimsy which also make it easier to put on without bubbles.
Here is the link for the anti-glare versions that i like - http://www.javoedge.com/reflexeshop/productCatalog/getProduct.do?poid=985&pbmId=4737
sn00x said:
I first used the Brando Ultra Clear - wich is really very clear, friends asked me why I do not use a screen protection until I told them to have a (much) closer look!
Brando Ultra Clear is available on ebay cheaper as in the brando shop.
When I bought my car holder I wanted to have a screen protector that is more anti-reflective. This is why I now use a 3M ARMR200.
The ARMR200 is really great, cause it's the only screen protector wich is two times coated and almost non-reflective.
I bought it on ebay where you get it right cutted for the Hermes. I don't know if it's also available in other countries on ebay. If you don't have a problem to buy it on german ebay search for "ARMR200 trion" cause the Hermes is sold here as "O2 Xda trion" for example. You'll find many results. E.g. this one
Click to expand...
Click to collapse
If you want to test it:
Goto http://www.display-schutzfolien.de/vikuiti/mmm-3m/index.php?language=en
and use the Code VIKUITI-XDA-DEVELOPERS.com until December 31.
This Vikuiti shop offers worldwide shipping and has many sizes in offer.
The code gives you a 20% discount on the product.
K.-U. Schenke
3M http://www.vikuiti.de/
Related
I was lookng for a protective case for my exec on the net and found this.
http://www.proporta.com/F02/PPF02P05.php?t_id=1355&t_mode=des
looks sturdy but dont like the looks. Anybody found/using better cases?
Help appreciated.
cheers
The best looking and quality case from what I've seen is the Piel Frama case: See: http://www.pielframa.com/imate_jasjar.htm
Piel Frama has a good history in hand making their cases that fit the phone with all of the cutouts necessary. The leather is also of a very good quality. They are a little bit more expensive than some of the others.
Krusell also makes good cases and has one for the O2 Exec/Jasjar: http://www.krusell.se/product.php?s=2&product=2095
I'd say the Piel Frama might be the best from what I've seen and Krusell might be 2nd. I just ordered both of them for Expansys and will try them out and see which one I like better and send the other back.
Expansys is quoting a 3 day shipment on the Piel Frama (they call it the Chairmans case) and 8 days on the Krusell.
Thanks
I was earlier looking for metallic cases but I think these definately look better and my exec shouldn't be any less safe in them. Me too off to expansys. Though as you already have ordered and will be receiving yours soon hope you wouldn't mind telling me which one you think is better then I shall order the same. Shall wait for your input. Thanks.
I have to have one that will clip to my belt (not using a swivel clip, they break far to easy) so I have one of these - http://www.expansys.com/product.asp?code=125516
It came yesterday, although I've not actually used it, it looks to be made well and fits the PDA nicely.
JJ Case
I have the Piel Frama Case (tan color) and like it very much.
On my magician, I have the Covertec case which is in my mind the nicest one. Unfortunately, they don't have a Universal case (yet).
Same holds true for the Vaja cases.
Cheers
hrb
Just got a black Frama for the JasJar this evening. Will post some comments reflecting some use in a day or two. First impressions are that the leather is the same fine, high quality leather for which Frama is known, very stylish appearance, and nice pockets for SD, credit cards, and currency. There may be a slight problem with the lid not closing all the way, that I'll have to take a look at more closely to see if it's resolvable.
Finally got the Piel Frama case for the Jasjar. Very nice quality, all of the cut outs are there. The leather strip does prevent the device from closing all of the way, but it is very slight.
I wish there was a belt clip and maybe the snap should have been magnetic instead, but other wise a nice case.
I may order the Krussell case as well and see how it does, as it is only $20.
Proporta have sent me the aluminium case for review.
in addititoon I am waiting for the Brando one to arrive any day
http://shop.brando.com.hk/o2xda.php
I currently have the Proporta Aluleather and Nutshell.
I reviewed the Aluleather one on www.windowsmobile247.com and will be reviewing all the others mentioned above soon.
this is the photo of brando case for htc universal
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.pda4thai.com/modules.php?name=News&file=article&sid=1239
See my post on the Frama case for the Universal as post #355 on the page below. The strap behind the keyboard does prevent the case from closing all of the way by a couple of millimeters. However, it's not a serious problem and isn't noticeable after a while. The closing strap / snap doesn't try to force the lid to closer further and so it doesn't put pressure on the hinge.
http://www.howardforums.com/showthread.php?t=722975&page=24&pp=15
With my case the problem is worse than a couple of mm. I can not close my case (even applying pressure) because the screen sticks up so high due to that leather strap across the top of the keyboard.
http://forum.xda-developers.com/viewtopic.php?p=184093#184093
I saw couple posts asking for these hard cover snap on covers. Hope this helps.
http://www.talkietech.com/at89tiac.html
CLear - http://www.talkietech.com/attih89hapls2.html
Black - http://www.talkietech.com/attih89hapls5.html
Pink - http://www.talkietech.com/attih89hapls1.html
There are more colors but 2 lazy to list them.
I just ordered one of these a few days ago should have it any day.
$13 and change shipped
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
3rd party vendor on Amazon is selling these for $10 shipped. See items 84 to 90.
http://www.amazon.com/s/ref=sr_pg_4...k:8925,i:wireless-accessories,n:301188&page=4
If anyone gets one of these, could they please review it? I really like how small the Tilt is and i'm curious to find out if using one of these cases makes it feel bulky or if it's still small enough to fit comfortably in jeans front pocket...
Thanks...
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Activ..._69?ie=UTF8&s=wireless&qid=1197051150&sr=1-69
_Alex_ said:
If anyone gets one of these, could they please review it? I really like how small the Tilt is and i'm curious to find out if using one of these cases makes it feel bulky or if it's still small enough to fit comfortably in jeans front pocket...
Thanks...
Click to expand...
Click to collapse
Agreed, I can't find any pictures of it actually on the phone above a very small resolution. So some nice digicam shots would work great. Anyone?
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Active...051150&sr=1-69
Click to expand...
Click to collapse
That's an outrageous price though. You can get these same cases on Ebay for $10/shipped in all colors. They're called the 2in1 case.
bedav said:
i think you can't open the keyboard with those case à 5$.
but with this one it's possible : http://www.amazon.com/AT-8925-Activ..._69?ie=UTF8&s=wireless&qid=1197051150&sr=1-69
Click to expand...
Click to collapse
I just called them to confirm and they told me it does open properly with the case on. And paying 24.99 for a crystal case is rediculous.
KyleK29 said:
Agreed, I can't find any pictures of it actually on the phone above a very small resolution. So some nice digicam shots would work great. Anyone?
That's an outrageous price though. You can get these same cases on Ebay for $10/shipped in all colors. They're called the 2in1 case.
Click to expand...
Click to collapse
It's Boxwave so of course it's overpriced. Don't know why I see so much love for them on these and other boards.
you can find it on ebay for about $9 shipped
ChInEsE ChIcKeN said:
you can find it on ebay for about $9 shipped
Click to expand...
Click to collapse
Yes. But we still can't find a review or pics on these to see how much bulk they add to the unit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've seen those. What I'm more referring to is comparing it with and without the case. Same picture, two phones (or photoshopped together). Just to give a bit of scale to it
SpeedRazr said:
I just ordered one of these a few days ago should have it any day.
$13 and change shipped
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I just got mine the other day from eBay, and the front face doesn't fit all the way on or stay on. I'm going to have to return it and find another one.
I've finally tested this case for more than 10 minutes and I really hate the fact that the edges are not beveled in, making it extremely hard to use my fingers to press the softkeys on the screen, onscreen scrolling and some slight awkwardness when pressing the outside buttons.
Mine was also made of white plastic, so it has this ugly white lip around the edges.
After removing my BodyGuardz skin, the case fits snugly and is very hard to remove (I accidentally cracked the lower piece while removing)
Oh well, you get what you pay for. Time to read up on Seidio cases
http://www.wirelessaccessories.com/... 8925 - TyTN II - Kaiser&sfid=134039&c=164107
I've used these for my last 2 devices. I don't recommend the rubberized as they scrape up easy. While you get what you pay for ($5.95 + ship) so I buy several. I prefer the protection from scratches and ease of use . It does make getting to buttons a little harder, I agree.
I went on Ebay and got a clear one for around $4 shipped. looks decent, works, only thing about the clear ones is that dust tends to collect under them and phone looks dirtier. a quick clean and back to new. i dont recomend dropping the phone using the case, but in all honesty i dont recommend droping the phone all together.
I am interested in buying this silicone case for my AT&T Tilt from eBay: http://cgi.ebay.com/Silicone-Case-f...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I was hoping if anyone else purchased it would recommend it or not?
Also, if anyone else knows of any other silicone cases out there, please post to let us know. I did not discover too many types of silicone cases myself.
TKN
And if no one is familiar with the case in the first post, what about this rubber made case: http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896
- TKN
I am interested in buying this silicone case for my AT&T Tilt from eBay: http://cgi.ebay.com/Silicone-Case-fo...QQcmdZViewItem
I was hoping if anyone else purchased it would recommend it or not?
Also, if anyone else knows of any other silicone cases out there, please post to let us know. I did not discover too many types of silicone cases myself.
TKN
Click to expand...
Click to collapse
$4.50 for a silicon case? Well, I suppose even if the case is poor quality, you won’t greatly out of pocket.
That picture on ebay is pretty bad. I can hardly distinguish the silicon case from the device itself
And if no one is familiar with the case in the first post, what about this rubber made case: http://www.seidioonline.com/index.as...ROD&ProdID=896
- TKN
Click to expand...
Click to collapse
This case is already being discussed on this thread here: http://forum.xda-developers.com/showthread.php?t=352605
And towards the last couple of pages, it is briefly discussed here:
http://forum.xda-developers.com/showthread.php?t=336542&page=23
Yes, I do think it is one of the best. It looks like it offers more than adequate protection without compromising its lightness in weight. I will look to order this particular case next week when shipping begins (according to one of the members)
My last question about the Seidio case is that is it a snap on case? I have bought a case previously for HTC Wizard and the little plastic things that are supposed to the cover on the phone broke.
- TKN
I don't know what you mean by snap on case. Remember that the case is rubber and not plastic.
Perhaps if you refer to the thread below, you may find answers to your questions:
http://forum.xda-developers.com/showthread.php?t=352605
A whole thread is being devoted to discussing this particular Siedo case already
Try this one!
Don't know if you're dead set on a silicone case for your phone but i personally went for a crystal hard case as the silicone cases don't really work too well with these phones as there is an open end on them in order for the keyboard to slide, plus i couldn't really find one that i liked the look of.
So i got one of these from this seller in Hong Kong... arrived in 4 days and the quality is excellent!
Have dropped it once and there was no damage to the case or phone. Even came with a screen protector too!
Crystal Case Kaiser
DITO
I too bought one of the crystal hard two piece case for my Kaiser. I was a little iffy when I got it out the packaging at first but it is now top of my eBay best ever purchases list.
Item
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Crystal Case+Screen Protecter for HTC TyTN II/2/P4550
http://stores.ebay.co.uk/AccessoriesShopHK
It not only creates a plastic protective environment for the phone that is not in the least intrusive to every day use, but without wishing to sound in the least vain, it makes the phone look utterly gorgeous and yummy. I have had many comments since using my Kaiser in public, but over the last few days several people where I hang out have wondered what the hell phone I was using to type on.
Point is...GET this item if you want to protect your phone and at the same time enhance its looks.
I bought that silicone case you linked to and let me tell you that thing is horrible. The fitment is all loose and it basically falls off.
vanydotk said:
I bought that silicone case you linked to and let me tell you that thing is horrible. The fitment is all loose and it basically falls off.
Click to expand...
Click to collapse
Which silicone case are you referring to so that I can avoid it also?
- TKN
the one on ebay from that hong kong seller.. the one that only covers the back and not the front
yep bought one of those crystal case+screen protector from ebay as well. Just arrived today and I am already loving the case. It looks great.
Wondering if anyone has actually tried one of the silicone cases yet. Another thread on this: http://forum.xda-developers.com/showthread.php?t=369377&highlight=silicone
Here's the one I'm looking at: http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
anyone know where i can get another original screen protector that came in the box? i liked how u couldnt even tell it was on there, and how it was made of a hard, almost, thin glass, type of plastic. Unlike most of the other screen protectors that are thick and bendy.
any ideas? or anywhere that sells ones VERY VERY similar to the original?
thanks!
I've been thinking the same thing, hopefully one of the many guru's here will have an answer!
Me three! Surely someone sells the OEM one. Post, people! Tell us who!
I know the OP asked about the OEM screen protector, but i've been using these on all my portable devices and they are quite literally the best screen protectors i have ever used. When applied correctly there is zero distortion and the screen looks exactly as it is without the protector.
http://www.overlayplus.com/US/dis_product.asp?model=HTC_ProTouch&modeln=Touch%20Pro&prod_type=screen
Its a bit on the pricey side but last night my fuze slipped outta my hand, did a nice midair tumble and slid screen-down across the edge of my desk leg, it only got a slight scratch that i buffed out with plastic polish
I'll be happy to snap some pics if you guys are interested.
I will update that a friend of mine who also owns a Fuze called HTC to ask them if he could purchase another OEM screen protector and the customer service person he spoke with told him they do not sell them separately but that he should check daydeal.com if he wanted the OEM screen protector. So, he took that to mean the ones daydeal.com has for sale for the Fuze are the same ones HTC supplies with the phone.
I cannot confirm this as the one he ordered has not arrived yet but I will try to remember to post here when I hear from him on these.
What about InvisibleShield? Anyone using that one?
http://www.zagg.com/support/whatis.php
These have worked out well for me. The anti-glare ones work very well.
http://www.boxwave.com/products/easyfinder/buy-best-at_t-fuze-accessories_3350.htm
I had the invisibleshield one but found that it was too grippy and it wasn't as clear as i hoped it would be. I've got 2 pictures here, you can see the optical clarity in the 2nd picture by comparing the reflection of the cologne bottle in the screen with the actual bottle. The screen protector covers both the screen as well as the buttons.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found that my invisible shield one has a bit of a orange peel finish on it which i didn't like too much. This one is actually smoother than the screen naked.
mark72501 said:
I will update that a friend of mine who also owns a Fuze called HTC to ask them if he could purchase another OEM screen protector and the customer service person he spoke with told him they do not sell them separately but that he should check daydeal.com if he wanted the OEM screen protector. So, he took that to mean the ones daydeal.com has for sale for the Fuze are the same ones HTC supplies with the phone.
I cannot confirm this as the one he ordered has not arrived yet but I will try to remember to post here when I hear from him on these.
Click to expand...
Click to collapse
Update: He received the screen protectors he ordered from daydeal.com and by the looks of them, they are essentially the same as supplied with the Fuze from the factory. He and I both looked at it and it looks and feels the same. If you like the OEM one, I suggest ordering from daydeal.com if you need a replacement. And no, I'm not affiliated with them. Just passing along the info.
mark72501 said:
Update: He received the screen protectors he ordered from daydeal.com and by the looks of them, they are essentially the same as supplied with the Fuze from the factory. He and I both looked at it and it looks and feels the same. If you like the OEM one, I suggest ordering from daydeal.com if you need a replacement. And no, I'm not affiliated with them. Just passing along the info.
Click to expand...
Click to collapse
I just ordered one of these and will post the results one I get them.
i second the boxwave one. its friggin clear and easy to put on
http://www.boxwave.com/products/cle...h-crystal-screen-protector-at_t-fuze_3350.htm
however, shipping is hella slow
but really nice product
i got the 3 pack and screwed up the first one but totally worth it
I ordered these from daydeal and would NOT state that they are 1:1 compared to the shipped one. HOWEVER, love it. It's a slightly different material (kinda anti glare but the "blur" is fully acceptable for me) and I had some concerns reg. finger friendliness but that's not the case. Stylus operation is easy (by far not so rubbery as the invisible shield). Form, fit and applying was very easy (much easier than the stock one). I bet Martin Shield is the best but I still think money well spent. On top, not so prone to fingerprints as the shipped protector.
good or better than OEM protector
I concur that this screen protector from DayDeal is as good as or better than (in my opinion) the original OEM protector that came with my Fuze.
http://www.daydeal.com/product.php?productid=34547
I ordered only one last week, but I may order a few more just to have them on the ready.
Hey I made these videos so you can all laugh at me ok? You can probably guess I'm not the next Youtube sensation... The videos were done by the X5. The pics by a Galaxy 5 (What a crap camera...)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A few notes:
Purchased from this link: TPU Case
Would I recommend this case? Hell Yes.
Would I recommend this eBay seller? Probably. Postage was pretty slow, but I had no problems at all. (I ordered on the 26th of May today is the 14th of June)
Also included with the screen protector is some kind of scratch repair stuff. I don't know how to use it though, luckily my screen is scratch free.
I got the first generation of the sikai cases. The fat, ugly, matte ones. Still they fit perfectly, and can really absorb shocks. The included screen protector was of above average quality.
They are a bit pricey though, I got an amazing TPU case for my Desire Z for 5$ or something wichi is actually 2 cases due to the weird design of the device. Anyway, I dont see any other option right now, so I recomment the sikai cases too.
I bought a black Sikai case off of Taobao. But it is different from yours. Mine covers more of the front on the phone. Awesome case, it will protect the screen should you drop it face down. Screen protector, not so awesome. Caused the screen to have a grainy image by distorting the pixels. Went and paid 40 RMB for a heavy duty screen protector custom cut for the screen and camera lens. What is the blue film thing that came with it?
Hey Poulsen8r
Can you give any feedback on a couple of things...
I have a Nillkin case i bought off e-bay. It fits nice but I found that when sticking the USB in the case got in the way and stopped it from going in all the way.
Same with the headphone jack.
The holes were too small on mine...I noticed your USB hole was much bigger and wondered how you are finding plugging in.
Cheers
Ordered one and it arrived yesterday...it took almost 30 days.
The case is excellent especially around the the USB port. The headphone space is still a little narrow for some of my headphone jacks but better than before.
It feels sticky to the grip which is nice as the phone is less likely to slip out of my hand.
I got the blacj shiny one and it looks great. The fit, especially around the front face lips perfectly.
The sent me the wrong LCD screen protectors but that's OK. I didn,t get any of the extras like cute badges or anything like that.
I recommend this brand
i have one and is near perfection
yeah i have one too, and its great!
Poulsen8r, what is color of the cover you have bought: Light Blue or Dark Blue? I'm guessing its Dark Blue, am I correct?
that's a light blue case
Are you sure? It seems more darker than the light blue.
Sent from my u8800 using xda premium
yes, i'm sure. i have the same one.
Thanks! Now buying it!
it's a great case though the screen protector that comes with it sucks
Thanks for the review! It made me buy the sikai case