Related
I have a new (four days old) Cingular 8125, and it got a bit antsy on me today.
After working flawlessly for three days, I was installing some applications on a new 1 GB mini SD card, soft resetting after each installation, when it returned after a soft reset and suddenly had no phone network. No "E" indicator, and an exclamation point next to the signal strength indicator. Uh-oh, thought I, before I broke down and cried! OK - not really, but I definitely wasn't happy about this!
When I checked the network settings, it said No Network under the GPRS setting. I called Cingular, spoke with a data rep, and performed a hard reset. (Had to use the "Clear Storage" app - holding the keys and soft reset wouldn't work). As soon as it returned from the hard reset, the Cingular software the rep had pushed out to me installed and phone service was restored. Which is a good thing!
But now I can no longer sync the device via Activesync 4.1. Nor can I install any applications; when I try, I get a dialog saying that the installation was unsuccessful. Windows installer or CAB installation, makes no difference. I can't successfully install anything on the device. I had scrubbed the mini SD card, except for a few folders filled with icons for use mostly in Pocket Informant and PocketBreeze. I figured that it couldn't hurt to leave them there. I also can no longer delete files or folders from the device. It's similar to not having Administrator rights on a Windows XP machine. As if everything is read-only, but I cannot change it.
I copied Smartkey over to the mini SD card via Explorer in Activesync, but whenever I reset the device I get a dialog saying that Smartkey cannot run, unknown developer, etc. I can't close the dialog right away, but it does disappear after about 30 seconds. If I open File Explorer and tap on the smartkey.exe file it does start and work normally - until the next time I soft reset.
Activesync will connect with the device but will not sync. Throws the attached error message. So I can explore the device but not sync. I tried deleting the partnership, performing a "repair installation" of AS 4.1 - no change.
As for the applications I had installed prior to all of this, they all seem to be benign - with two possible exceptions.
In Main Memory:
Pocket Informant
PocketBreeze
ContactBreeze
iLauncher
On the mini SD:
Resco File Explorer 2005
PDAMill's Gamebox Solitaire, Gems, and Classic
Dinarsoft's HandySwitcher and HandyMenu
Phatnotes 4.7
ListPro 4
Tweaks2k2
Resco Sudoku
Resco Keyboard Pro
All versions that claim to support WM5. All applications seemed to be working fine, with the exception of Resco Sudoku and Resco Keyboard Pro. The only change I had made with Tweaks2k2 was showing the time and date in the taskbar. Resco Sudoku locked the device up, with just a black background and 13 large colored orbs on the screen. I uninstalled it immediately. Resco Keyboard kept giving error messages when I tried to select it as the SIP. I had just uninstalled Resco Keyboard and performed a soft reset when it returned from that reset it had no phone network. Note that all of these applications had been working fine up until this point in time, except Resco Sudoku and the Resco Keyboard Pro. Hmm... Needless to say, I suspect that the Resco apps have a problem with WM5. But I owuld think that a hard reset should have cleared up anything those apps had done. Maybe not, though.
Anyway, that's when I called Cingular. Does anyone have any idea at all as to what could be causing all of this? Or better yet, what could fix this? Please!!
I'm very familiar and comfortable in WM2003/SE, but I'm completely new to WM5, so I'm not even sure where to look for troubleshooting.
Thanks in advance for any advice!
EDIT: Really sorry the thumbnail is so small - I didn't think that it would be, Click on it to read it. Thanks again.
EDIT: Error should read: 0x8000ffff Sorry about that.
I think the fact that you cannot delete files/folders on the device is key. If you cannot modify folders, then the installer can't either, so software installations will fail. Does this also apply to files and folders on your card? I'm guessing that it does not, and that your supposition (key folders and perhaps registry keys are RO now) is correct. Unfortunately, you can't modify folder permissions using activesync explorer and you can't install an application that can either. Catch-22.
Have you tried a hard reset subsequent to your discussion with the Cingular rep? Perhaps this will re-create an installation with the standard settings.
Sleuth255 said:
I think the fact that you cannot delete files/folders on the device is key. If you cannot modify folders, then the installer can't either, so software installations will fail. Does this also apply to files and folders on your card? I'm guessing that it does not, and that your supposition (key folders and perhaps registry keys are RO now) is correct. Unfortunately, you can't modify folder permissions using activesync explorer and you can't install an application that can either. Catch-22.
Have you tried a hard reset subsequent to your discussion with the Cingular rep? Perhaps this will re-create an installation with the standard settings.
Click to expand...
Click to collapse
No, I haven't hard reset again yet - I wanted to wait and see what responses I get.
I did, however, find one of the Activesync logs though, and all sync attempts since the last one that worked have the following two error messages:
"TraceToFile -> ERROR in CChangeTracker::GetMaxCounterInProfileCleanupTable : hr = 0x800ffff - ctapi.cpp(3695)
TraceTraceToFile -> ERROR in CRAPIDevicePrivate:HandlePackets : hr 0x800ffff - RAPIDevicPriv.cpp(443)
And then some whcih are very similar, but with the numbers in parenthesis changing.
Look familiar to anyone?
Thanks.
OK, I just found a Microsoft KB article (Q243349) that seems to indicate that an 0x08000ffff error is Microsoft SQL Database-related.
??? Baffling.
Actually I do have an MSSQL Server on my PC - one of the programs that I run installed it and requires it. Maybe if I disable it?
EDIT: Error should read: 0x8000ffff Sorry about that.
I just noticed that wherever the errors start throughout the log, the only two applications mentioned - other than Activesync, of course - are Resco Explorer and Ilium's eWallet, which is really odd. I never installed eWallt on this device, though it has been giving me fits on my AximX50v ever since they introduced SyncPro about a year or so ago.
My 8125 is up and running again.
I performed a hard reset and this time I downloaded and installed AS 4.1 on my notebook and tried synching with that. My notebook does not have an SQL server installed, and it's a "virgin" AS install - neither Resco Explorer 2005 nor eWallet Pro has ever been installed on that PC.
I can't say for sure, and I'm still investigating, but I believe, based on the Microsoft KB article that I referenced above, that the SQL server on my desktop PC, and possibly eWallet Pro and/or Resco Explorer 2005, is the cause of my recent grief.
The MSKB article specifically targets the SQL database - same version as mine - as a known cause along with certain databases, and since both eWallet and Resco Explorer 2005 are mentioned throughtout the WCESComm.log, always in the first four or five lines of the error messages contained in the log, I suspect that eWallet's DB may have somehow triggered the mayhem, as their SyncPro has caused endless losses of my eWallet data since Ilium introduced it. It's possible that Resco Explorer 2005 just happened to be the application I had just installed before the device went belly up for a bit there. Actually, Resco Keyboard Pro was installed right after that, but since RE 2005 is mentioned in every error log item, and since Resco has a special page on their site mentioning how "...an issue with the way that Windows Mobile 5 handles installing software that may result in a failed installations...". I've written Juro about the issue, to give him a heads up just in case.
So all is well for now. Hopefully I will be able to continue synching my other PPCs (five), all with WM2003/SE, on the desktop, as the SQL thing is only supposed to affect the WM5 OS.
If anyone else runs into a similar situation, please send me a PM or post here. I'd be glad to share whatever I discover on this, and I would also be interested in seeing how other devices were affected, common issues, etc.
Guys, I have a question.
I used to have an iPaq 6300 running WiMo 2003, when selecting input methods there is an arrow beside the input method you click on to bring up the menu that lets you choose between Keyboard, Block Recognizer, Transcriber or Letter Recognizer. This was instantaneous! The moment you press the arrow, the menu pops up and you can switch input methods instantly.
On my new Atom Exec though this is not the case. You have to press the input method icon first, which brings up the arrow, then click on the arrow, then wait like a minute before the menu pops up. What gives? Is this really how all WiMo5 devices work? Is this a problem with WiMo5 or with the Atom Exec in particular?
It is annoying because it makes it harder to switch between input methods. Could someone tell me the score on this?
Thanks,
My bad, I fiddled around with the Atom a bit more and fixed the problem by doing a Hard Reset. Now I set the PPC back up to how I like it and it's working flawlessly.
Hmm after some time the problem seems to be back. It looks like the phone bogs down with stuff after a while, causing this problem. I don't feel like reformatting, does anyone have a fix, or a program that cleans up and optimizes your PPC?
this is an issue of WM5.
It also happens to WM6. The more applications you installed, the slower it will get (not sure what kind of application though). Well, Atom Life has 1GB of ROM. Of course people will start installing a lot of applications.
Anyway, I read somewhere in the forum stating that if you have more than 10 today plugin installed, the SIP will take a some time to appear. The plugins don't necessary be active. I mean, the ones not active are also counted. I have not confirmed this yet though.
I have more than 40 programs installed in my atom. It didn't slow down that much (only 5 to 10%) but what I usually do is to backup everything first before I install anything. At the first sign of speed reduction or bugs, I just do a restore. I have more than 15 today plug-ins both active and inactive. However, one thing I noticed is that it is better if you install your non-essentials to your sd card. It doesn't matter if you do a hard reset, they will still be there and if you use a tray launcher or clauncher, you can configure the icons to reappear even if you do not re-install them. This way, you reduce the clutter in your main memory and at the same time save you the trouble of re-installing. The reconfiguration of the executable icon will take some time but it is still faster than re-installing 30+ programs. It is important though to maintain a storage of no less than 17MB. Once you go below this, you will really see the reduction in speed and will be pissed off with your PPC. By the way, do not use Opera or any modified IE (tab browsing and downloading. by the way, Opera is good with downloading but sucks in handling your PPC's memory) while doing something else with your PPC. It will really really slow down your PPC.
i posted this same thread sometime ago, but there was no solution. At last i discover the culprit. I see the difference in speed when i install Embedded Windows VB Runtimes. regardless whether i install it in the memory card or the main memory.
Got this info from another site, it really works.
--------------------------------------------------------------------
make WM5 SIP faster (加快輸入法) (not a joke)
X51V ENG A12 + Ce-Star 2.8R2A + Monster SIP + MS IME for JAP works well.
But I am not very sure "every WM5 PPC" works well, too.
After installing a lot of softwares, WM5 SIP becomes slow.
You can make it fast again.
1. install resco explorer 5.42 and resco registry at \Device
2. use resco registry to export the registry of
HKEY_CLASSES_ROOT\CLSID
to a file (like CLSID.reg) at PPC, or SD, or CF
donnot edit or modify CLSID.reg
3. use resco registry to delete CLSID
4. use resco explorer to execute CLSID.reg to import the registry CLSID back
5. turn off PPC, soft reset
It is amazing like magic.
--------------------------------------------------------------------
Weird... it really works. Everything back to normal. Menu is displayed instantly after tapping on the list button.
I'm using Atom Life WM6, so this mean that it also works for WM6.
Urk Double Post
Aha! O2's proprietary software is a bunch of Today plugins! That may be the culprit. I noticed the a while later though after the O2 software was installed.
I have no perceptible slowdown on the Exec other than the input method switching. I just need to fix that!
My main memory is about 85% free (83.6MB) and yes I do install all the non-essentials to the SD card.
MightyOx I'll try your method hopefully this fixes this issue. While "upgrading" to WM5 I thought it would be a completely better experience, but I'm finding WM5 has issues and that quite a few things were done better in WM2K3 (like the SIP switching speed) or how about creating a new SMS message in WM2K3 you only needed 2 taps here in WM5 you need 3. *roll eyes* sometimes I wonder what developers are thinking when they take steps backwards like this.
On the other hand I love being able to rotate the screen, and Voice Command 1.6 was totally worth it.
Mochan said:
Aha! O2's proprietary software is a bunch of Today plugins! That may be the culprit. I noticed the a while later though after the O2 software was installed.
Click to expand...
Click to collapse
It's not O2's software. It just happen to be the next software you've installed before the problem show itself. It can be any software. As I said in my previous post, it will happen after you've installed a certain number of software. I think it is WM5 and WM6 related.
Anyway, the workaround is already posted. So, I have no more complain about this problem.
Yeah, looks like it's not. I tried Mightyox's method, THANK YOU SIR my Atom is running fine again. It's like once you pile over some registry entries over the CLSID directory, it takes time to get it. So the solution is to delete the registry key and "re-enter" it so it goes back on top. Very strange but if it works then more power.
Tried it on my flame...Wow...works like a charm
It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )
..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3
r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?
Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.
sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.
Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.
...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...
I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?
...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...
How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.
WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE
..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/
do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program
..it looks that my calculator works properly...
I am hoping that someone here will be able to solve my problem:
I have an Orange SPVM700 (Trinity) WM5 with the original Orange Rom. The first thing I did when I got this device was install the HTC Phone Pad SIP. After a number of painful trial and error attempts I was able to use this SIP by using G4 SIP by setting Phone Pad as the default SIP in the G4 SIP control panel, and also within the G4 sip start-up application..
However, try as I might, I can not use any other SIP application, such as PCM Keyboard (v0.2), Teksoft Finger Keyboard, TenGo, RescoKeyboard, etc.).
Anytime I try to activate one of these alternative SIPs, my Trinity displays whatever the default SIP is set to (as set in G4 SIP control panel app). I can either set the default to "Keyboard" or "PhonePad". If I set any other SIP as default (in the system control Panel), I get a White Screen of death and a Hard Reset.
Does anyone have any experience of using an alternative SIP (other than WM Standard SIPs or PhonePad) with an Orange M700 Trinity?
Glad i am not the only one having this issue, i have tried and failed to get any alternative SIP working,
http://forum.xda-developers.com/showthread.php?t=322108. Post #5
Any advice would be welcome, i have tried soft resets after changing the SIP in the messaging client, soft resets after changing via the Start - settings - Input route and all to no avail.
O.K. Finally managed to work out a solution to this problem......upgrade to WM6.
I installed AX3L's Rom - AX3L_WM6_WWE_v2.0.8.2 and every thing is now great. I can use any SIP I like, the Trinity runs much faster, and the new radio performs better. I recommend you follow this route.
Also, if you need to roll back to WM5, there is a version of the Orange M700 rom kicking around for you to restore to should you need to return or anything.
For those that don't/can't go to WM6 here is a link to a working solution for WM5
http://forum.xda-developers.com/showthread.php?p=1444312&posted=1#post1444312
Another victim of "not enough driver memory" problem. It has been answered before.
You may want to try remove unneeded startup drivers/services/autorun and/or kill some running stuff in the background (READ: cprog.exe). That might solve your problems.
Yes, upgrade to WM6 may work too, since it is better in managing driver memory.
Dear all,
I read the forum since some months now, and I thank you all for the awesome things I learned there, now I would like to know whether something I have in mind is achievable or not.
I own an Ubiquio 501, a very thin qwerty PDA (with touchscreen, wifi and all) which works very well. However:
-With the AKU 3.3 ROM (released around february) it suffered from very bad graphic/video performance, but everything else was working pretty well.
-With the last WM6 upgrade (released in august) the maker fixed the graphic issue, but for me the keyboard behavior is nothing but unacceptable. It seems like I am the only one having problems with the keyboard, however a downgrade (to AKU 3.3) fix the keyboard bit, so I guess the problem is not in the hardware.
What I would like to achieve is to put the keyboard drivers in the WM6 ROM, what do you think, is this feasible? I was able to unpack the ROMs with the kitchen tools, but am not sure of which module the actual keyboard driver is, the relevant files and dirs (find dump/ -iname "*key*") in the
AKU3.3 ROM :
Code:
./KeyBDState_service.dll
./KeyBDState_service.dll/KeyBDState_service.dll
./KeyIcon.dll
./KeyIcon.dll/KeyIcon.dll
./keypad.dll
./keypad.dll/keypad.dll
./keysifter.dll
./keysifter.dll/keysifter.dll
./devauthkey.dat
and in the WM6 ROM:
Code:
./KeyBDState_service.dll
./KeyBDState_service.dll/KeyBDState_service.dll
---> same file as in WM5 (md5sum match)
./KeyIcon.dll
./KeyIcon.dll/KeyIcon.dll
--> different
./keypad.dll
./keypad.dll/keypad.dll
-->different
./keysifter.dll
./keysifter.dll/keysifter.dll
--> different
./devauthkey.dat
-->same file as in WM5 (but I guess it doesn't have anything to do with the keyboard!
Should I look for other files? (I think so
Thank you all in advance!
Regards,
DAniele
I have had the 503g for a few weeks now and love it. If there is anything I can help you with please let me know.
Hi maevro, thanks for joining
I just found (using a task manager) that stopping the "key sifter" service yields to a complete stop of the hardware keyboard (only things that keep working are the keyboard backlight and some "special" buttons: the comm-manager activator, the mode switcher (alpha, num), the shift key).
However, overwriting the keysifter.dll file with the wm5 version I was only able to reach a non-working state (the service does not start automatically and will refuse to start manually).
So, keysifter.dll is definitely (one) culprit, but additional testing may be needed to see its dependencies (I guess) in order to replace it with a (better) working version.
Regards,
DAniele
--
gdaniele said:
Hi maevro, thanks for joining
I just found (using a task manager) that stopping the "key sifter" service yields to a complete stop of the hardware keyboard (only things that keep working are the keyboard backlight and some "special" buttons: the comm-manager activator, the mode switcher (alpha, num), the shift key).
However, overwriting the keysifter.dll file with the wm5 version I was only able to reach a non-working state (the service does not start automatically and will refuse to start manually).
So, keysifter.dll is definitely (one) culprit, but additional testing may be needed to see its dependencies (I guess) in order to replace it with a (better) working version.
Regards,
DAniele
--
Click to expand...
Click to collapse
Is the graphicproblem totally gone, so you can play games and watch movies without any problems?
Also, do you have any problems with network on this device?
Keep us updated if you find any solution to the keyboard-delay problem!
Thanks
Well, I kind of sorted it out. The solution ain't optimal, but at last I can write my sms & mails as I was used to.
After many tries and file swap between wm5 and wm6 rom dump, I stopped the keyBDState service and... kaboom, everything worked as expected Yes, it was _that_ simple
Please note that there are still some issues (shift + arrow keys does not highlight) but I made this mod a few days ago and have noted no instability whatsoever.
The only thing that ceased to work after the mod is that I can no longer compose phone numbers from today screen (but in the phone app everything works, so I am not that disappointed).
If you want to try it by yourself, I can only advice for a prior full backup, and can take no responsibility for whatever damage may occur to your data, phone, sim card... blah blah blah ...
So long for my first post, although I really would like to investigate the thing a little bit further (and get highlighting back as it was in wm5).
To answer uggugg, I only tried a (mandatory ) Zoolander sample and it worked well (re-encoded to fit screen size, 20 fps, don't remember the bitrate, should check) as for the games... I really ain't into gaming (not on my phone, at least) so I'm sorry I couldn't tell you anything.
Regards,
DAniele
--