Database Users

AutoUpdate of time on WM6

I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
But ever since I updated my PPC to WM6 the AutoUpdate of clock stopped working. Can someone help me out
i did find a registry entry which I used.. I do timezone tab in Phone settings and it is checked to autoupdate and still the phone is unable to update the time from network.
anyhelp is greatly appreciated

You are seriously wondering why you are not getting full functionality out of a bootlegged OS?

chichu_9 said:
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
Click to expand...
Click to collapse
I can't help with the WM6 question...but I am curious how you managed this with the WM5 OS. I have an 8125 and apparently a similar travel pattern. My device NEVER updates the time based on the network. How did you set this up when you were still running 5?

I am interested in how you got it working as well. Mine did not update once from the east coast to the west coast. Not even when making a call.

well i have a reg tweek that will change the time when you enter a diff time zone via the network...hope this is what your looking for....
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5

ugahairydawgs said:
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
Click to expand...
Click to collapse
thats why this is called xda-developers. we'll find a way to make it work.

btw how did you get the new wm6 on your wizard....is there a link..

yes, i was wondering where the wm6 rom download is also.

>> bj///////////////////////////////////////////////////

RiNo808 said:
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
Click to expand...
Click to collapse
Yes! Its there on WM6 too!!!! Dont know if it actually works, yet to travel in a different timezone.

I have had it enabled in my registry in WM5 and WM6. It's NEVER worked for me. I change phones a lot so I'm always taking out the SIM card. When I do this, the battery comes out and it loses time/date.
I'd be curious on the details as well because I've never heard anyone that actually had it functioning!
-Mc

I tested this tweak and it seems to work when I initiate flight mode and then turn flight mode off (which will be great when I land on the plane...the time will adjust automatically).
Will this update periodically check the time to ensure it's sync'd or will this only work when the phone initially communicates with the network?

acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.

faria said:
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
Click to expand...
Click to collapse
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc

McHale said:
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
Click to expand...
Click to collapse
upon doing some more reading aparently some aku3 roms now support it!!!
but in a diferent way. here it is;
Receiving Network Identity and Time Zone(NITZ) information is currently unsupported.
This feature was incorrectly documented to be supported by Windows Mobile Version 5.0 AKU3.0 in Windows Mobile Version 5.0 Documentation Release. NITZ is currently supported at Radio Interface Layer(RIL) only.
Click to expand...
Click to collapse

OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.

registry wizard does this
the xda-developers registry wizard allows you to make the registry tweak "show time zone s page" in both WM5 and WM6,- this put the time zone tab in phone-options, but the feature never worked for me. I called my provider to confirm if they supported it but the help desk was clueless- Would love to see if anyone got this working.

Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.

ctgoodman said:
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
Click to expand...
Click to collapse
what ROM are you using? I'm on Cingular in IL and it doesn't work here.
-Mc

Interactive said:
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
Click to expand...
Click to collapse
Here is a quote and a link to a program I found on the Cingular/HTC forum:
"How hard would it be to go to the clock settings and select the "visiting" button and select the time zone you are in?
Works for me.
There are options for atomic clock server time sync. But that won't address time zone issues.
http://zdnetasia.com/downloads/handheld/swinfo/0,39043246,39175141s,00.htm
"
I don't go out of my own time zone, so I don't really have any issues with it. The registy hack has worked just fine on my 8125.

Windows Mobile 6 on O2 XDA Orbit

Hi all,
During the 3GSM congress lots of people tried WM6 and compared it on devices that ran WM5 before. It seems that there's a real global improvement with a noticeable gain of speed.
According to what I've read everywhere, the main weakness of the Orbit is its slow processor, so this upgrade could be very interesting.
I'm a complete beginner in this "all inlcusive-phones" world, so I was wondering, can I upgrade the OS myself (when available) or is it an OEM solution with no possible upgrade?
Thanks and good bye.

discussion here:
http://forum.xda-developers.com/showthread.php?t=290039

ok sorry,
by the way I saw a strange file on eMu*e called :
WM6 Crossbow (WWE) for HTC Wizard v5.2.660
maybe the beginning of a solution ?

no problems - just worth keeping it all together. For instance there is talk on that thread about the wizard ROM and why it won't work on the artemis...

ooh! ooh! I found it.
http://rs91.rapidshare.com/files/32826418/orbit_WM6.rar
woohoo!

Sooooooooooooo now I gotto go hkml the Bootloader and edit security reg editor zen unrar it??? doh! whr nubz find these thingies?

omien said:
Sooooooooooooo now I gotto go hkml the Bootloader and edit security reg editor zen unrar it??? doh! whr nubz find these thingies?
Click to expand...
Click to collapse
All the information and files you need can be accessed by reading the threads in the "Artemis mobile 6" area of the bulletin boards here: http://forum.xda-developers.com/forumdisplay.php?f=362

For those that havent seem - and I only came across it today ...
http://www.my-xda.com/xdaOrbitSoftware.html
WM6 installers for UK Orbits.

After installing the WM6 ROM from O2, the only problems I noticed were that 1) once enabled, the WiFi could not be disabled, and 2) the camera zoom did not seem to function, although number 2 may of been due to resolution, instead of a 'bug' of sorts.
Currently I'm using the Artemis_Touch_1.0_Lite_WWE ROM from these forums, and I'm pretty pleased.
You're right, the Orbits shortfall is its slow processor, however it does seem to be able to chug along perfectly fine with this ROM.
edit: note, also that the aforementioned site for downloading the O2 WM6 ROM, I visited this a while ago and the serial number that is present on my device was classed invalid.

I downloaded the updater - my Serial was recognised OK, and everything installed OK. Definately speed increases. I can certainly disable WiFi and the zoom on the camera is OK.
WM6 is certainly cleaner, more stable and I'm a happy bunny now!

Downloading WM6 from O2 site
Seidr said:
note, also that the aforementioned site for downloading the O2 WM6 ROM, I visited this a while ago and the serial number that is present on my device was classed invalid.
Click to expand...
Click to collapse
I had the same problem, when using Firefox. Worked fine with IE though. One other thing - at first, after having my s/n validated, when I clicked the download link, I was routed to the HTC site instead of to the download dialogue. That turned out to be ZoneAlarm (licensed version) getting in the way. In the end, I temporarily disabled ZA and got the download.

Live Media + GPS (looking for beta testers) **Stream video from your phone

** UPDATE 16-JUN-2009 **
Introducing Geocasting with Inca X (Video)
http://www.ix-m.com/
GPS Website
http://www.ix-m.com/gps
Latest CAB is always available here
www.ix-m.com/downloads/livecam.cab
The app is no longer in beta.

This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.

Phil Bishop said:
Hi All,
We have a new version of an application, which is now available on beta and would greatly appreciate it if any of you have time to participate in the trial and provide me with feedback on whether the software works or not on your device.
In simple terms the new version of the application allows you to broadcast both an image stream and GPS data which can be viewed either in real-time or later via the Live Media Web application
Here's a quick video introduction to the software
http://www.youtube.com/watch?v=6fpQlqJROrw&rel=0
Device requirements:
Windows Mobile 6, camera and GPS (internal or external via BT)
Windows Mobile 5 + .NET CF v2 (or above) camera and GPS (internal or external via BT)
Download CAB from
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.1.cab
or visit www.ix-m.com/gps-beta from your mobile
Quick video to show you how to set-up the app on your phone
http://www.youtube.com/watch?v=76lzPUwTyHM&rel=0
Website access from your PC to view your broadcasts and published broadcasts
http://www.ix-m.com/gps-beta
Support and Feedback
Please use the contacts form on the website
http://www.ix-m.com/contact.aspx?type=7
As this is my first posting here, hopefully I've got all the html tags correct and I hope some of you have time to try this out and let me know what you think about the app.
Many thanks
Phil Bishop
Inca X Mobile
Click to expand...
Click to collapse
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?

met3ora said:
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Click to expand...
Click to collapse
This is really good app and is very promising. I have been testing for phil for a while on this. Yes it can put quite a drain on the battery, however when im driving i have it plugged into the charger so as long as i stay topped off then it does alright.

james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.

shogunmark said:
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
Click to expand...
Click to collapse
ill give that a shot but i doubt thats the issue cause i did a hard reset n installed it n it worked fine and then i tried using it again later on and got that same error msg again :-(

Mogul on Sprint
I've had a couple of reported problems about running the app on the Sprint Mogul, if anybody has sucessfully (or otherwise) run the app on a Sprint mogul it would be helpful to know if this is generic problem or not.
Many thanks
Phil

I have a mogul and it seems to work flawlessly. I was able to broadcast two separate feeds with gps.

Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.

Mike1002 said:
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Click to expand...
Click to collapse
Since I posted lot's of people have emailed asking for a cache then upload option along with the ability to be able to disable the speed tracking
I've been working these today along with several other feature requests and hope to have a new build available sometime tomorrow with these updates in.

would there be a way to lock the screen while broadcasting?

diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
Lock the screen how? You can always map a button to the phone lock.
Hey phil, any chance you can do an overlay and display speed somewhere on the screen?

I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???

james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
I am getting the same error when i try to do a broadcast. I am running "[Apr 16] Dutty's WM6.1 5.2.19209 Release [User Guide & ChangeLog in Post 2] UPDATED" which has 3.5 installed already. I tried re-installing netcf 3.5 and i get an error about memory and closing applications, to restart phone and try to re-install. I tried that and got the same exact error. So i re-flashed with Dutty's rom, as listed above, but tried installing netcf from the get go and got the same exact error. Anyone have any ideas???

Would it also be possible to have an option to enable the flash?
The camera flash light on my device is only half decent, but having it on would be a great option.

WildSioux said:
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
Click to expand...
Click to collapse
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil

diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
If you mean - stop the screen from going to sleep when broadcasting?
Then yes I am looking into a solution for that for handsets that don't stay alive while the camera is active.

greetings phil. very nice program. its working great on my sprint mogul.

Phil Bishop said:
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
Click to expand...
Click to collapse
Hi Phil,
Yeah, shortly after posting that question I messed around with it a little bit and made a test name. Everything is working great now.
Now, anyway of making the feed fullscreen on computer?

Version Update
There is now an updated version available, with some of your feature requests in.
Record Mode
Allows you record your broadcasts with GPS offline and upload them later.
On the Broadcaster's setting screen there is a new item "Live broadcast" - tap/select and the Broadcast menu option changes to Record.
If you have a storage card, then the files are saved to the livemedia folder, otherwise under \\appData\livemedia.
On the website, login and under My Broadcasts is a new link to upload your broadcasts.
Please note this is only applicable for GPS enabled broadcasts.
Disable sending speed data
On the GPS enable/disable screen there is a new menu item called "Include speed" uncheck so speed data is not recorded.
Check for updates
From the main menu this can now be used to check for and download furture version updates.
Download link
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.2.cab

Softbank (JP) Packet Charges (WARNING)

I just want to share my recent issues so others will be able to avoid what I am going through.
If you have a Windows Mobile from Softbank (X Series such as X05HT HTC Touch Pro) and are thinking of changing the ROM so you can actually use it, be VERY CAREFUL.
I went through the fun of learning how to install a cooked ROM and was pleasently supprised when everything went well. ROM installed, English was working, Internet was working everything seemed great...
About 2 weeks after I did the ROM upgrade, we got a call from Softbank about our charges. 500,000yen (yes, about $5000US) for Internet Access Packets.
It turns out that the settings applied by Softbank to your phone create the wrong Access Point, meaning your phone uses a AP that is not part of the packet houdai (all you can eat packets)
There is a fix however, so if you are planning to update your ROM with an English one, make sure you use the attached (for X05HT & X04HT only) to get the correct access point.
Otherwise you will be in for a nasty supprise come billing time.
I hope this post saves some people time and pain.
Big thank you to s2k7 for his help on this!
Updated file attachments. Please download and follow the instructions from WIFIWake-X05HT.zip. If you have a X04HT, download both files.

dayyanj said:
I just want to share my recent issues so others will be able to avoid what I am going through.
If you have a Windows Mobile from Softbank (X Series such as X05HT HTC Touch Pro) and are thinking of changing the ROM so you can actually use it, be VERY CAREFUL.
I went through the fun of learning how to install a cooked ROM and was pleasently supprised when everything went well. ROM installed, English was working, Internet was working everything seemed great...
About 2 weeks after I did the ROM upgrade, we got a call from Softbank about our charges. 500,000yen (yes, about $5000US) for Internet Access Packets.
It turns out that the settings applied by Softbank to your phone create the wrong Access Point, meaning your phone uses a AP that is not part of the packet houdai (all you can eat packets)
There is a fix however, so if you are planning to update your ROM with an English one, make sure you use the attached (for X05HT & X04HT only) to get the correct access point.
Otherwise you will be in for a nasty supprise come billing time.
I hope this post saves some people time and pain.
Big thank you to s2k7 for his help on this!
Click to expand...
Click to collapse
Ouchies. Did they have you pay that data fee?
I just pulled the sim from my 923sh and put it into my diamond and flashed a wwe rom. I found another thread here that says if you go with the AP settings that the connection wizard gives you, it sets you up with the [email protected] ([email protected]) AP. This one charges per 30 seconds as opposed to packets used. Luckily I switched away from this to the OPEN AP soon after.
My Packet Full starts on February 1, so this month I am data-less. Last month my bill was 20,000en. Nowhere near to yours, however. I thought that SB sent a text message at 50,000en (the day after you reach this).
I will give this wifiwake a shot and see what settings it provides. The other thread, created by Larsuck seems to say that if you are on the packetfull (5985en per month max) and with open settings, you shouldn't incur fees.
What kind of email account do you use? Did you set up some kind of gmail and use pop3 with the mail client or do you have an i.softbank.jp account?
Thanks,
Kevin

Kevbodian said:
I will give this wifiwake a shot and see what settings it provides. The other thread, created by Larsuck seems to say that if you are on the packetfull (5985en per month max) and with open settings, you shouldn't incur fees.
Click to expand...
Click to collapse
This is true, if you run the WifiWake you will get the right settings. I confirmed with SB that I was no longer connecting through the wrong AP after I used WifiWake.
Kevbodian said:
What kind of email account do you use? Did you set up some kind of gmail and use pop3 with the mail client or do you have an i.softbank.jp account?
Click to expand...
Click to collapse
I use gmail and Exchange. Exchange is the best as it has direct push, but you need someone with a server to set up an account for you, or have one at home. The softbank mail for me isn't worth the hassle, but perhaps that's why I never got a message saying I was over 50000 yen?
Good luck with the WifiWake.

it sounds dangerous when im in doubt if I am using a white plan service (not the packet houdai) and saw my AP all exactly already signed as the AP above: [email protected], will it cause any troubles?

it depends. if you dont stay connected and only use a small amount of traffic you will be ok. otherwise you can expect to pay more then what your phone is worth in just a few days.

WakeOnWifi newbie questions
Hello. Can someone explain to me the following? Where do I execute this WakeOnWifi file? On the phone? On the computer the phone syncs with? I just tried executing on my phone but not sure if that worked since I didn't see anything particular on the screen happening. Also, do I need to execute this every time the phone boots or just once. And how can I check whether my settings are cool now?
My setup: Softbank X05HT, EnergyROM 21903

axel007 said:
Hello. Can someone explain to me the following? Where do I execute this WakeOnWifi file? On the phone? On the computer the phone syncs with? I just tried executing on my phone but not sure if that worked since I didn't see anything particular on the screen happening. Also, do I need to execute this every time the phone boots or just once. And how can I check whether my settings are cool now?
My setup: Softbank X05HT, EnergyROM 21903
Click to expand...
Click to collapse
I've added a new download (see first post) This includes full instructions.
Sorry I wrote this post at a time when I was "learning as I go" and never updated it further.
Hope this helps
DJ

How to set up SoftBank's NEW data connection on non-SoftBank ROM
Curtosy of itamae
Step 1. Run either ConnSBM.CAB or ConnSBM_noproxy.CAB for your purpose.
* ConnSBM.CAB: make a connection, overwrite WirelessMgr_Service.dll and enable hidden proxy (webopen.softbank.ne.jp:8080), it is fully compatible as X01HT's standard connection.
* ConnSBM_noproxy.CAB: just make a connection (no WirelessMgr_Service.dll and hidden proxy installation).
* The connection will be created, however password entry is still empty at this moment.
Step 2. Run ORE2cert.cab (self-signature certificate for WIFIwake.exe).
Step 3. Copy Out.xml and WIFIwake.exe (self-signed) into \Windows folder.
Step 4. Just RUN WIFIwake.exe from \Windows.
* The password will be created into the connection made by ConnSBM.CAB.
* To confirm whether success or not, check the connection "Internet > SoftBank", and click "Edit -> Next -> Next". If "****************" is shown at the Password field, the password has been successfully created.

Packet death....ouch...I feel for you brother...

thisoneguy said:
Packet death....ouch...I feel for you brother...
Click to expand...
Click to collapse
Luckily with the help of some free legal experts from the SHOSHINSHA SENTAA" (消費者センター) in my ku, we were able to demote the charges to 10%, but still ￥50,000 for one month of data is like 1995 prices..
My recommendation to ANYONE on softbank with a Windows mobile or even an iPod/iPad is to make sure you are on PAKE-HOUDAI and if you change your ROM, ensure that you run the WiFiWake application above.
NOTE the WifiWake does not give a prompt or anything. It takes a split second to run, and you will not see anything. To check that it has been successful, follow the instructions above to check the password exists.

How does this compare?
Thanks to all for the clarifications. Couple of follow-up questions. I downloaded and installed the tool that's available here and it seemed to do the trick as well.
http://forum.xda-developers.com/showthread.php?t=441400
How is this different from teh WifiWake tool? And also, in the same thread someone says that you absolutely have to have "PACKET FLATRATE FULL" to avoid any issues. Is this the same thing as "Pake houdai"?

axel007 said:
Thanks to all for the clarifications. Couple of follow-up questions. I downloaded and installed the tool that's available here and it seemed to do the trick as well.
http://forum.xda-developers.com/showthread.php?t=441400
Click to expand...
Click to collapse
That looks like it might be a newer version. I don't know if it will be any good or not. I can only atest to the WifiWake app.
axel007 said:
How is this different from teh WifiWake tool? And also, in the same thread someone says that you absolutely have to have "PACKET FLATRATE FULL" to avoid any issues. Is this the same thing as "Pake houdai"?
Click to expand...
Click to collapse
Yes, Pake houdai is the same as packet full rate.

Thanks
Thanks, man.

In the case of a UK imported SIM-free HTC desire just setting the OpenSB AP is enough right?. Or do I have to run these zip also?

scary chicken said:
In the case of a UK imported SIM-free HTC desire just setting the OpenSB AP is enough right?. Or do I have to run these zip also?
Click to expand...
Click to collapse
This ZIP is only for the Touch Diamond and Touch Pro. You can try running the contents of the zip on the Desire, but there are no guarantees that it will work. You might like to PM itamae as he seems to be the best source of knowlege on the softbank AP and getting it running.
scary chicken said:
just setting the OpenSB AP is enough right?.
Click to expand...
Click to collapse
I doubt it will be enough. Be very careful

scary chicken said:
In the case of a UK imported SIM-free HTC desire just setting the OpenSB AP is enough right?. Or do I have to run these zip also?
Click to expand...
Click to collapse
Sorry, I just clicked, the HTC Desire is an Android OS, so the WiFiWake app wont work on it.

It happened to me too...
I got my Touch Pro a few days ago and started flashing away new roms to try, and I guess I was caught in this too...
Check this out, from my online account:
2010年7月11日 ～ 2010年8月6日
合計金額 18,610円
通話料　ホワイトプラン 2,960円
　割引　ホワイト家族２４ -2,640円
定額料　パケットし放題ｆｏｒスマートフォン 5,700円
通信料　Ｓ！メール（ＭＭＳ）＠０．０８円 134円
通信料　Ｓ！メール（ＭＭＳ）（無料分）＠０円 0円
通信料　アクセスＩＮＴ＠０．２円 12,590円
通信料　ウェブ＠０．０８円 26,399円
通信料　ストリーミング＠０．０８円 0円
通信料　ＰＣダイレクト＠０．０８円 3,939円
通信料　ＰＣダイレクト＠０．０８円 5,814円
通信料　メール（ＳＭＳ） 0円
割　引　パケットし放題ｆｏｒスマートフォン　対象通信分 -36,286円
The main villain in here is the 通信料　アクセスＩＮＴ. Since this month is almost over, and there's a warning in their page (・アクセスインターネット料金はパケットし放題の対象外となりますのでご注意ください。) I guess I'll just shup up and pay...
But... Will the settings posted in this thread put me again in the 通信料　ウェブ＠０．０８円 connection (which is covered by パケットし放題ｆｏｒスマートフォン)?
Thanks in advance

Koiti said:
I got my Touch Pro a few days ago and started flashing away new roms to try, and I guess I was caught in this too...
Check this out, from my online account:
2010年7月11日 ～ 2010年8月6日
合計金額 18,610円
通話料　ホワイトプラン 2,960円
　割引　ホワイト家族２４ -2,640円
定額料　パケットし放題ｆｏｒスマートフォン 5,700円
通信料　Ｓ！メール（ＭＭＳ）＠０．０８円 134円
通信料　Ｓ！メール（ＭＭＳ）（無料分）＠０円 0円
通信料　アクセスＩＮＴ＠０．２円 12,590円
通信料　ウェブ＠０．０８円 26,399円
通信料　ストリーミング＠０．０８円 0円
通信料　ＰＣダイレクト＠０．０８円 3,939円
通信料　ＰＣダイレクト＠０．０８円 5,814円
通信料　メール（ＳＭＳ） 0円
割　引　パケットし放題ｆｏｒスマートフォン　対象通信分 -36,286円
The main villain in here is the 通信料　アクセスＩＮＴ. Since this month is almost over, and there's a warning in their page (・アクセスインターネット料金はパケットし放題の対象外となりますのでご注意ください。) I guess I'll just shup up and pay...
But... Will the settings posted in this thread put me again in the 通信料　ウェブ＠０．０８円 connection (which is covered by パケットし放題ｆｏｒスマートフォン)?
Thanks in advance
Click to expand...
Click to collapse
Hey, I can't remember what the extra packets were charged as when I got caught out by this. But safe to say, if you haven't installed and run the files in this thread on a new ROM there is a good chance that you are getting caught out too.
Check your access point. If when you installed the new ROM, you let the connection wizard create the data connection for you then you will be using the wrong (I.e. expensive) access point. If your access point is anything other then open.softbank.ne.jp then you have the wrong access point and need to run the attached

dayyanj said:
Hey, I can't remember what the extra packets were charged as when I got caught out by this. But safe to say, if you haven't installed and run the files in this thread on a new ROM there is a good chance that you are getting caught out too.
Check your access point. If when you installed the new ROM, you let the connection wizard create the data connection for you then you will be using the wrong (I.e. expensive) access point. If your access point is anything other then open.softbank.ne.jp then you have the wrong access point and need to run the attached
Click to expand...
Click to collapse
I did it after I posted in here, but the damage was already done.... Check this out:
2010年7月11日 ～ 2010年8月7日
合計金額 26,930円
通話料　ホワイトプラン 2,960円
　割引　ホワイト家族２４ -2,640円
定額料　パケットし放題ｆｏｒスマートフォン 5,700円
通信料　Ｓ！メール（ＭＭＳ）＠０．０８円 155円
通信料　Ｓ！メール（ＭＭＳ）（無料分）＠０円 0円
通信料　アクセスＩＮＴ＠０．２円 20,910円
通信料　ウェブ＠０．０８円 26,399円
通信料　ストリーミング＠０．０８円 0円
通信料　ＰＣダイレクト＠０．０８円 3,940円
通信料　ＰＣダイレクト＠０．０８円 5,814円
通信料　メール（ＳＭＳ） 0円
割　引　パケットし放題ｆｏｒスマートフォン　対象通信分 -36,308円
I'll check again tomorrow, with minimum usage, if the アクセスＩＮＴ stops increasing and the data begins flowing again through ウェブ, Almost sanman-en as telephone bill... My wife is gonna kill me...

from where can i download the rom of softbannk x04ht diam100?
please share if you have some..
regards

Blackberry Connect on Topaz working

Hello Together,
here's solution on how to get Blackberry Connect running on Topaz:
Instructions:
------------
- Make sure you have uninstalled blackberry connect before doing the following.
- Attached you will find a small zipped executable (EnableBBCTopaz.exe). Unzip it and copy it over to the \windows\ folder of your device.
- Open a registry editor and navigate to HKLM\init
Create a new string with the name "Launch130" and a value of "EnableBBCTopaz.exe" (without the quotes of course)
If Launch130 already exists, choose a number higher than, it doesn't really matter, just make sure it is higher than the other entries so it get started after everything else.
This makes sure the exe ist started after every softreset.
- Make a softreset, or execute the EnableBBCTopaz.exe manually.
- The program changes your model-id from "HTC-Topaz" to "HTC-Raphael" in memory
- Install Blackberry Connect like you usually do (My tests where successfull with version 4.0.0.104, 4.0.0.106 didn't work for me -- just hung up after a restart)
- After installation and the auto-reset through BBC open the BBC settings and go to the Info-Tab. Under device-name there should now be HTC-Raphael.
Click to expand...
Click to collapse
The solution is in fact the one from Rhodium forum, the respect goes to them, in particular to c0rnholio. The instructions are also copied from their thread. I just changed the program to fit to Topaz.

hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666

Which blackberry client version do you have?
TheOmen666 said:
hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666
Click to expand...
Click to collapse

Hi again,
I tried with versions .106 and .104.
Same behaviour with both versions ;(
TheOmen666

Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).

gnick said:
Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).
Click to expand...
Click to collapse
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?

Hi mitsi, did it work at the end?
mitsi said:
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?
Click to expand...
Click to collapse

gnick said:
Hi mitsi, did it work at the end?
Click to expand...
Click to collapse
Hi Gnick, partly. I got it to work with stopping the Blackberry Service and then activating the programme (your one) after a soft reset. However, after every soft reset, I will need to do the same process.
Open MemMaid
Stop Blackberry Service
Open File Explorer
Start your programme
Open File Explorer
Start BlackberryMain.exe
Close File Explorer
Enjoy emails.
This is too much like hard work, so I think I will be either selling my Diamond 2 and going back to my Diamond 1 or keeping both, using the Diamond 1 and waiting for a better fix to become available by subscribing to this thread (and others) and hoping that decent clever chaps like yourself will come up with a fix!!!
By the way, one other item that needs fixing is that I am only able to have my work email on this. I do not have the Blackberry Secure Internet (the one to send service packs and add other email accounts). So I can't get my home email..

There is one other alternative by the way:
This is to write a Mortscript programme that does this tedious process automatically.... I have made enquiries to someone I know....

@gnick
Thats a good point, asking for the Provider...
Well I checked the websites of T-Mobile Germany and the last device I found, where you could officially download the bbconnect client was the "Kaiser" (Mda Vario III, HTC TyTN II, AT&T Tilt ).
This means, that I either have to get rid of my Topaz or convince you to make a special version where the model-id is set to the one of the Kaiser (I only found "KAIS120") but I am absolutely unsure wether this is the korrekt model id used for the bbconnect client.
Regards,
TheOmen666

Hi All,
I finally got it working.
As I am running WM 6.5 on my device, I had to change the AKU String in the Registry HKLM\System\Versions to ".1.6.3".
After changing this, I got a PIN and could do the Enterprise Activation with my account.
Thanks a lot to all for the effort to get this working on the Topaz.
Cheers,
TheOmen666

Hi All,
I too got it working. I followed the tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked (106 didn't) just as you said gnick .
Blackberry still crashes Manila sometimes when deleting the last email and exiting tmail.
I cannot activate my other email accounts as the Blackberry Browser (I think this is BES) does not load, even after the prompt "The internet connection is currently in use by the BlackBerry browser. Would you like to temporarily disable BlackBerry browsing? Yes/No". Once disabled and refreshed, it still does not connect. I think I read this on cOrnholio's thread.
Sent mail from pc does not redirect mail to the sent mail folder on the D2 but into the inbox instead.
The soft reset problem still exists, but it does at least work. My D2 has now had emails for the last 3 days.... Fortunately the D2 is more stable than the D1 so soft resets are required less often.
My thanks go to gnick and cOrnholio for this. I can now use my D2!
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Add shortcut to BBMain.exe to the start menu
Add shortcut to MemMaid to the start menu
Set MemMaid to re-open at same page in Advanced Settings
A couple more tips for new people at this:
Be patient. Sometimes you can try the same solution more than twice and get different results
Be patient. The IP Address and PIN don't always appear immediately.....
Regards

Hi All,
Me too.
I got it working. I followed the same tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked.
Orange Romania.
Everything is ok !

mitsi said:
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Click to expand...
Click to collapse
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.

gnick said:
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.
Click to expand...
Click to collapse
Hi gnick,
I must admit, I haven't checked this, but I have had problems before with Blackberry. Because our IT Dept in their wisdom have set the security to lock the phone after 60 minutes of inactivity, I keep having to unlock it. I have a Mortscript programme which does this for me thanks to EdSub, but it would appear that Blackberry takes a higher pecking order after a soft reset so the Mortscript isn't activated before Blackberry, no matter how I try to configure it. Therefore, I suspect Blackberry will start before your programme too, so it would then think the phone is a D2 instead of a Rafael immediately after soft reset.....
If your Blackberry has the Security Policy set by your IT Department, you too may have this issue, but otherwise, it may be possible to start your programme before Blackberry starts.
Isn't it all rather silly??? The things we do to get our phones to our liking eh???

Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric

tsetse_fr said:
Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric
Click to expand...
Click to collapse
It shouldn't take longer than a few minutes. You may be able to help it on it's way by going into Blackberry settings, then in the Utility tab, press "Register Now". Then if you go to the Identy tab your PIN and IP address should appear hopefully.

nothing appens when i press "activate now "....
same probleme with a touch hd ...Bes account has been reset ...but pin and ip still pending
i'll wait ...
want a good new : already broke my digitizer yesterday :s got to change it ...

News from HTC
Hi All,
For your information, I sent the following question to HTC:
"Dear Sirs, I have an HTC Touch Diamond 2. I have requested information before on how to get Blackberry Connect working on this phone but had the response "we don't support third party applications". This is fair enough, but please see this link: http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61. If you support this on other HTC phones, then why not the Diamond 2? Do you have plans to develop this further? I would appreciate your help/comments on this please."
I received this response from HTC:
"New Response From [ Mike (EU team) ]
Hi Paul,
The link you found is for Asian devices, not European ones.
Blackberry Connect is not supported by HTC Europe and there are no plans to release the 3rd party application or test its compatibility.
Please contact Research In MOtion to see if there is compatible version for your device.
Best Regards
Mike"
Hopefully they will change their minds in the future. Has anyone tried RIM?

mine worked 2 days later
had to wait only because my orange data network was pending ...
now it works perfectly