Related
Hi,
I was searching the forum but haven't found any useful info about that.
Do you know any WM5 software which can change TyTN into wireless router ?
Something like WModem, but using 3G and WiFi in the same time.
My idea is to come back home, plug the charger into my phone , run WRouter and have wireless internet connection everywhere in the flat from my mobile connected to 3G web'n'walk T-Mobile network.
What do you think ?
Cheers,
BenOne
IMHO -
no way
no driver support for that
AFAIK no application
why? power consumtion on highest power setting is terrible, and battery is soon completelly depleted, there is also neecesary to left charger in phone...
if you need wifi router (w/ NAT, firewall, VPN...) you can buy inexpensive router for few bucks and it is more compatible, more stable, more usefull, more secure, far better manageable etc...
yeah right, but for what another device if I have one ?
I am charging my tytn everyday, you know how it eats battery...
just wanted to know, it could be quite useful. cheers
U can use bluetooth on the tytn as a router with a reg hack u can connect more then one computer, not the same range and speed but it is possible.
yeah but then everybode have to have bluetooth in their notebooks. we have 3 laptops in the flat and nobody has bluetooth in it. but what then ? everybody are connecting using dial-up, like thorugh normal usb cable, but instead of it, thorugh bluetooth ?
now we have like that - I am commin back home, connect tytn to my laptop, dial-up, and wireless in my laptop is ad-hoc configured, so everybody are connecting to my machine, and modem (tytn) is shared. if tytn has wireless, I thought, that I don't have to leave my laptop all the time turned on. It could be great to leave connected to charger and that's all. All the internet and local home network could be through that. If there was a linux distribution for this phone I am pretty sure this option would be one of main in netwokr configuration...
anyway thx. just wanted to know if there is any piece of soft for that...
benOne
have you seen this official htc link: http://www.europe.htc.com/support/software/htctytn.html?lang=en
it seems it could be possible with vista... but I'm not sure...
EDIT: NO WAY... This is just wireless modem driver for vista... but not for wifi connection! Sorry!
Anyway, I'm very interested in... it could be very interesting for other connections as well... to get online a game consolle...like nintendo wii...
I really hope this dream will come true!
yeah, imagine you play in the bus online. cool!
battery problem. in this configuration I give our tytn 1 hour working on wifi and 3g used together in the same time...
anyway at home you have charger, in a car aswell, you can buy few batteries on ebay and problem resolved heh
sooo, who can start write this application ?
to which company or open source coders team should I send this idea ?
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Yea, I searched around a while on this way back but there is no solution that I could find.
Your best bet is to either just use PAN bluetooth, or tether just one computer over bluetooth and share your connection via wifi. It's super easy on a mac, not sure about windows.
Benone said:
yeah, imagine you play in the bus online. cool!
Click to expand...
Click to collapse
ehehe...NO, MATE.... There's NO adsl connection where I live... So I can just use my tytn as a HSDPA modem and I use to share his connection on my PC, BUT I'm not able to share it throug wifi on my wii...
I really hope a coder could solve this... even if I'm not sure it's possible.
Lancealot said:
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Click to expand...
Click to collapse
yeah, cheers pal, I've already written about that above. I have this kind of network at my home frome the begninnig of using tytn. What I want is to stop using my laprop as a router, my tytn has everything to be a router itself, it needs just a piece of software. This thread is only about piece of software.
Joined this site a while ago, and needless to say, I've been literally blown away by it. The members of this site are just incredibly talented; I've been able to make my 8525 look and function just fantastic, and just about any fix/patch I've been able to locate through this site.
Currently using Custel WM6 rom and it's so stable and faster than the WM5 I had (though it was so hard to choose with so MANY excellent cooked roms to choose from)...
So, since it seems there's no limit to what can be done with these great devices, I was wondering if it is at all possible to use an 8525 to connect an Xbox 360 to Xbox Live?? I am able to connect using Internet Connection Sharing via USB to my laptop running Vista Ult. and get great surfing speed, so is there any way to somehow configure it to get the 360 to connect to Live through it? Could the 8525 be connected directly to the 360 (prob not likely) or can it be set up using the laptop to share the connection??
Any help/answers on this would be greatly appreciated!!!
I may be wrong, but I don't think that this is possible.
As far as I know, the xbox has no bluetooth pan support, and I don't think it is possible to have an USB modem directly setuped.
The remaining possibilities are: through the RJ45 or through the wifi. Sadly the hermes has no RJ45 connector, and it is unable to become an acces-point nor an add-hock host.
I just wanted to say that the idea of using a Hermes to connect an xbox 360 to xbox live would be just about the coolest thing ever done with a cell phone.
Is it possible to connect a 360 to XBL via a PC/laptop?
Dammit!!
Well, was worth a try, especially before tangling myself in wires trynna wing it... Guess I will be calling those Optimum guys for my XB Live fix...
Precisely what I was thinking. Was sitting here surfing using the phone as a modem, getting great speed, then thought, 'hey it would be cool as f%#$# to connect to Live with this...' I mean, I know the 8525 could probably handle it... The question is, what CANT this phone do?!
HOLLIDAY1183 said:
Joined this site a while ago, and needless to say, I've been literally blown away by it. The members of this site are just incredibly talented; I've been able to make my 8525 look and function just fantastic, and just about any fix/patch I've been able to locate through this site.
Currently using Custel WM6 rom and it's so stable and faster than the WM5 I had (though it was so hard to choose with so MANY excellent cooked roms to choose from)...
So, since it seems there's no limit to what can be done with these great devices, I was wondering if it is at all possible to use an 8525 to connect an Xbox 360 to Xbox Live?? I am able to connect using Internet Connection Sharing via USB to my laptop running Vista Ult. and get great surfing speed, so is there any way to somehow configure it to get the 360 to connect to Live through it? Could the 8525 be connected directly to the 360 (prob not likely) or can it be set up using the laptop to share the connection??
Any help/answers on this would be greatly appreciated!!!
Click to expand...
Click to collapse
Just tried it. Plugged it in and enabled Internet Connection Sharing, and the phone starts charging, but says "Check USB Connection" I'm not much of a hacker, so I can't attempt any driver\software hacks to get it working. You'd probably have to write a driver for the XBox to recognize the phone, and possibly vice versa. Definitly possible. Probably never going to happen though.
I'm doing it now. I connected the 8525 by USB to my computer. Then I open up the Internet Sharing program that uses the phone as a USB modem (I'm using Black Majic ROM btw). Then I select connect on the program on my 8525. Once it connects, I go to my Network Connections on my PC. I have the RJ-45 connected from the XBOX 360 to the ethernet port on my PC. I click once on the connection that says Local Area Connection # (mine is 13, everyones would be different) Windows Mobile Based Internet Sharing Device, then I hold Ctrl on my PC keyboard and click on the other connection (the one for my ethernet port). Once both are highlighted, you can right click on either one and select Bridge (I believe thats the one, anything that says Bridge on it) and let Windows bridge the connections and you should be set. Sorry if my explaining isn't very good.
Via a PC it should indeed be not an issue (as explained above).
To do it directly, it should work with an ethernet-bluetooth bridge. I'm
using 2 ethernet-wifi bridges to connect a TV and a PC to a wifi router,
but I'm pretty sure ethernet-bluetooth bridges also exist.
Jörg
Wow, according to drodri I was pretty close to having it right before... I will try that setup in a sec... also, is there a way to incorporate my wireless-G linksys router into this, or no? Is that in Vista?
I appreciate your input... I've done exactly the same as your setup, and when I go into Network Connections, it has the 8525 listed as Remote NDIS based Internet Sharing Device (Internet Connect #5) & the ethernet connection as Local Area Connection (Unidentified Network)... In the Network and Sharing Center, do I make the ethernet connection Private, or leave it Public? Or does it matter at all... because it still for some reason won't connect to Live, it still fails the IP test... there must be a setting or configuration I'm missing here, I just know it
You could also possibly use an ethernet to wifi device (wireless access point) to go from ethernet to wifi on the 360, then use a wireless network to the TyTN (ad-hoc mode rather than ap mode) and use that to run the connection..
but..
a) its an expensive way to do it
b) it needs extra hardware
c) it may not work (can the tytn do ICS over wifi rather than usb? DUN mode may work on the newer roms that will have it - but does DUN work over wifi)
d) the access point would need to initiate the connection to the phone while also doing dhcp for the xbox.. it should work.. and id try it for you.. except that it seems like a horribly complex way to do it.
Hmm... maybe I'll give it a shot.
Where there's a will, there's a way
I think the ideal goal here would be straight from 360 to Hermes. USB or wifi, with a small adaptor if needed. It would be beautiful if someone could write drivers so you could just plug 'er in with USB and use the built in Internet Sharing on the Hermes.
Obviously those are high hopes, and in a perfect world everything would automatically work like that. *drools over universal compatibility*
dtx said:
I think the ideal goal here would be straight from 360 to Hermes. USB or wifi, with a small adaptor if needed. It would be beautiful if someone could write drivers so you could just plug 'er in with USB and use the built in Internet Sharing on the Hermes.
Obviously those are high hopes, and in a perfect world everything would automatically work like that. *drools over universal compatibility*
Click to expand...
Click to collapse
For USB The problem is the driver would have to be on the 360.. it's 100% impossible.
Even if you can run unsigned code on your 360, you'd also have to be some kind of coding,hardware modding, hacking junkie to even try to write a 360 driver; on top of which to do it for a crazy reason like interfacing to one mobile phone... that would be die hard madness!
Microsoft on the other hand could probably whip it up in 5 minutes as the xbox already supports everything that's needed except an RNDIS driver to enumerate the phone as a network card. Problem being the target audience is small; possibly even just you guys
Wifi is more likely to happen as you dont really need to modify the 360, if someone wrote a driver to make the phone look like a wireless AP (if thats possible with its wifi chipset) and assuming ICS on WM6 supports wifi connection to the PC/360 (im not sure it does) then it should work fine. (Has anyone checked if the 360 wifi adapter can support a connection to non-ap ad-hoc wifi? if it can then this might work already if you very lucky - i dont have the wifi link for my 360 or id try it)
sambartle said:
.......if someone wrote a driver to make the phone look like a wireless AP (if thats possible with its wifi chipset) and assuming ICS on WM6 supports wifi connection to the PC/360 (im not sure it does) then it should work fine. (Has anyone checked if the 360 wifi adapter can support a connection to non-ap ad-hoc wifi?....
Click to expand...
Click to collapse
Does anybody know if there is already software to make the Hermes a WiFi-Router or make ICS make select WiFi?
I'm going to try this tonight with my regular xbox
There are already instructions on this forum for using your device as a wifi access point. It seems pretty straight-forward. So you should be able to connect any wifi client, including a wifi capable Xbox 360.
8525 / Hermes wifi AP
Hey, I actually did something similar since I didn't want to buy a $100 wireless adapter. I have a PC (but can be done with a laptop) with a wi-fi connection near my 360 all I had to do was use a patch cable to connect the PC to the 360. I am running vista, but Patch cables are hardware that tells the network card they are attached to a like device. It automatically shared my connection and we were able to go on-line. There were other ways I found that suggest changing router settings and such, but this was the easiest way. All you need now to use your phone to get your 360 on-lin is a computer
Ok, I could never get the "internet sharing" to work on x1 with my friends laptop cause i dont have the drivers...so always used Wifirouter.
I find it a little slow, but it works and does work well. However, I read that the x1 supports "HSDPA, 7.2 Mbps; HSUPA, 2 Mbps" ...but i dont get speeds like that.
If somebody has the files required for connecting the x1 to a laptop and use internet sharing instead of wifirouter...can you upload and post it here? I will then keep them on my storage card for safe keeping.
Also, how do you find internet sharing? Is there any difference in speed compared to wifirouter?
Any help or advice would be great, cheers guy!
I think HSDPA is simply network dependent -when its there you get an H symbol on your signal strength (taskbar) ...when its not there you get the next best thing (3G) and if that's not available you're stuck with plain old slow GPRS (G)
Internet sharing works well for me (obviously depends on the connection you have on the X1 -as above) ...have not used wifirouter so can't say how they compare
7.2 Mbps is theoretical maximum. Your provider is not obliged to provide you with this speed. I get about 1 Mbps for download.
Actually you don't need special drivers for the X1 in order to use tethering. Just connect the X1 to a PC using an USB cable and start the "Internet Sharing" Application on the Xperia. Within the application select "USB Connection" and choose your preconfigured ISP connection profile - é voilà. You will notice that the Xperia appears as a network adapter on the PC. I use that a lot.
Regarding the speed: It really depends on your mobile network. Though my network provider (Vodafone Germany) has some spots where 7,2 MBit/s should be available, I have never had such fast download rates - it's more like 2-3 MBit/s which is still quite okay for me. And even if the network would be capable of such fast transfer rates, the speed will be reduced by the more clients use the same cell.
I also read somewhere (guess it was on SE offical site) that using HSDPA and HSUPA together will limit the download speed to 3,6 MBit/s. So you might want to switch HSUPA off and use HSDPA only - at least it's worth a try if you're sure that your operator provides such fast transfer rates. I always have both switched on.
Nice, 2-3mbps is a lot faster than i was getting...i guess i will need to try this out.
Regarding my friends laptop, maybe i should have said its win xp but it doesnt have active sync or any x1 soft installed...so maybe thats why its looks for the drivers?
Basically i was wondering if you guys knew where i could get the drivers keep them on my phone for times when im out and can get my proper internet fix
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
I've started using WMwifirouter now though as it's easier, I don't carry a USB cable with me all the time, and you never know when it'll come in useful!
Random example... me and a couple of mates decided to learn some songs to play at our local, we had chords and lyrics for all except one, we were in a garage, my mate had his macbook, but couldn't pick up his wifi.
I started WMwifirouter and voila!
Speed wise, I usually get around 1Mbps, depending on signal etc, I've seen no difference between USB and wifi sharing.
How is the battery consumption when using WMWifiRouter, e.g. how long does the battery last? I can imagine this is the worst use-case at all, because you have WiFi active and HSDPA in parallel.
The big advantage when using an USB connection is that the battery is charging while it's connected, though the WiFi method is much more comfortable and flexible.
you do know that 7.2Mbps mega bits per sec? and not megabytes.
sidneylopsides said:
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
I've started using WMwifirouter now though as it's easier, I don't carry a USB cable with me all the time, and you never know when it'll come in useful!
Random example... me and a couple of mates decided to learn some songs to play at our local, we had chords and lyrics for all except one, we were in a garage, my mate had his macbook, but couldn't pick up his wifi.
I started WMwifirouter and voila!
Speed wise, I usually get around 1Mbps, depending on signal etc, I've seen no difference between USB and wifi sharing.
Click to expand...
Click to collapse
Actually you do not need a cable, you can have the phone to act as a bluetooth modem through the internet connection sharing , no drivers required what so ever, you will need to pair your phone with the laptop first make sure, that Bluetooth PAN client is checked on the laptop, then start the internet connection sharing on the phone and make sure that you are using bluetooth PAN, and you will have instant access on your laptop, No drivers, No cables
assuming the laptop has bluetooth
wifi is much more standard, so it's handy to have.
The best part here is non of these mrthods are mutually exclusive, so you can use whichever is best for the situation. USB is handy as ICS does drain power, using wifi for it makes my X1 extremely warm...
foo said:
... using HSDPA and HSUPA together will limit the download speed to 3,6 MBit/s. So you might want to switch HSUPA off and use HSDPA only...
Click to expand...
Click to collapse
You're right!
sidneylopsides said:
I've used my X1 on a few machines with ICS, drivers have always installed automatically (Generic NDIS I think it says), and that's on XP, Vista and Windows 7. No setting up with activesync etc, just plug in and start ICS.
Click to expand...
Click to collapse
Yes, thats what comes up...but it wont auto install. Tried it on three laptops and they all wont work haha. I rebuilt the machines/laptops so even tho all drivers are installed (device manager)...maybe i left some out.
I was hoping somebody on the forum would know where i can find these drivers?
I know this sounds stupid...sorry
Generic NDIS is one of the system files in windows found under system32, windows will not boot even in safe mode if these drivers are not loaded, ICS works fine as far as i can tell with no extra drivers on any windows XP or later
i downloaded this;
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
but its from 2005
I hope it works
Ive owned my x1 for about 6months, I have unlimited pda data plan but not tethering plan with my carrier. For some reason I can teather my x1 to my eeePC 901 via USB,but not BT,and get internet when Im not in a wifi spot. It does give me the BT PAN option and my devices are paired but cant get internet connection, only thru USB. Ive tried this multi times for over a month now and have not been charged any data usage or overage on my bill.
I was about to do the r3a update, but was wondering if there was any ninja fixes in this update. Id hate to lose this ability just for a little faster performance.
just use wmwifirouter bro
ActiveSync installation provides the ICS drivers
fracmo2000 said:
Yes, thats what comes up...but it wont auto install. Tried it on three laptops and they all wont work haha. I rebuilt the machines/laptops so even tho all drivers are installed (device manager)...maybe i left some out.
I was hoping somebody on the forum would know where i can find these drivers?
I know this sounds stupid...sorry
Click to expand...
Click to collapse
You DO need ActiveSync to be installed before you can use your X1 for ICS.
I tested it yesterday on my Windows XP SP3 laptop: When you connect your WM6 mobile with the ICS program running on it, WinXP demands for a plain Generic NDIS driver but won't find a suitable one. But during ActiveSync installation (version 4.5 worked for me), the USB drivers are updated, and afterwards my X1 got recognized as a "Windows Mobile Internet Connection Sharing Device" or something like that.
ActiveSync is not active during ICS session, but its prior installation is mandatory for it to work.
Greetings,
MiK
I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
You can configure ICS on the phone to use a different IP range (probably also possible on the PC but don't know how).
So then you can use Phone->ICS->USB->ComputerA->ICS->Wi-Fi->ComputerB
WMWifiRouter uses 192.168.3.x instead of .0.x by default. I think this can also be configured using ICS Control.
frankenbike said:
I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
Click to expand...
Click to collapse
I use WM WiFirouter, it is a great program with multiple different configurations. I use it at home on an old IPAQ hooked to my PC as a wireless router so my kids can use the internet on their laptops.
WM WiFi Router was my first choice. Note the point I made that the battery drains faster than it can recharge. This becomes something of a problem after an hour or so.
Sadly, I got the connection sharing option to work now on the laptop using ICS control, but it seems to disconnect the WiFi ad-hoc network. And doesn't actually share through the WiFi. I suspect this is a problem with the way the WiFi on the laptop works, since I had the same problem with Network Bridging, and had to run a Dos script to enable the WiFi. It only works when bridging is being used, so I have to find the equivalent for when bridging isn't being used but ICS is.
I don't suppose anyone knows anything about *that*?
EDIT: I just downloaded the latest version of WMWifiRouter, which has USB connection support and seems to be a whole lot more reliable in general. AND IT WORKS with connection sharing, the laptop WiFi works as a router, and it DOES solve my problems. Thanks for the suggestion that made me reconsider it again.
EDIT +1: Still uses up the battery faster than it charges. Not as fast as WiFi though. WMWifiRouter is a pretty amazing connection sharing tool kit with USB, BT and WiFi connectivity and lots of control without the weird IP address pathologies. Amazing that it also gets around my laptop's weird connection sharing WiFi pathology as well. Another nice thing is the "keep connection alive" ping feature, and the real time power status and information. They really try to pack a lot of useful stuff for your $20.
Hi,
I live in Australia. I bought a SGS from UK. It has nothing changed in firmware its the same as it comes from the box. (just a few games and apps installed from the android market).
My problem is when I connect the SGS to my laptop through the USB cable and I chose "PC INTERNET" I get a connection but i get a lot of drop outs, I would say being honestly every 5 minutes my connection drops. I live right in the city and my phone has good reception so its not the reception.
I haven't tried teethering (i dont wanna teether coz mobile plans says, NO teethering).
What can I do to fix the drop out connection problem.
if you are using your internet via the LAPTOP over the USB cable, then you need to figure out WHY your LAPTOP is not connecting properly to the Internet.
it takes about 1 min to connect and when it connects i choose HOME connetion. than it works good for 5 mins and it drops out and reconnects itself.
Correct me if I've read your post incorrectly but isn't what you're doing tethering?
From Wikipedia: "Tethering is the use of a mobile device such as a mobile phone to supply Internet access for another device which is otherwise unconnected, using the mobile device as a modem. This can be done through Bluetooth wireless technology, Portable Wi-Fi hotspots, or cables (such as USB)."
well yes and no...
it is teethering but carriers cant prove that.
however
if i do select teether on my phone it says something like this option will use black hole date or something (from my understanding is that it will use different data to my free date) so i choose to try the cable connect than select interent connection.
anyways the problem is still there... has anyone got any solutions or give me some ideas?
thanks
are you trying to use your phone as a modem or not?
if you are, then we can help you there are many ways to do it.
but if you are doing the opposite, using your laptop internet, for your phone to access internet (which doesn't make any sense at all) then we can't help you as it's a laptop problem.
im trying to use my phone as a modem but in a way without carriers finding out im actually using my phone to teether.
my problem is that my connection keeps droping every 5 minutes for 10-30sec.
I use my Galaxy as a modem and I had nothing but hassle when connecting using the cable. I found out its far better to go into settings then wireless settings then switch mobile AP on. Your phone sends the connection over wifi to the pc and gives me no hassle at all.
I reckon the only way your service provider would know is by looking at how much data you use so just be careful and you should be fine. Or find out what your monthly limit is and put a data counter on the phone, I use Netcounter, its free and simple but gives the info you need like daily, weekly and monthly usage
yup, the wireless method is by far the easiest one, and best of all it is build in!
as for your cell phone provider finding out, regardless of what you do, they don't care, they only check how much data you used up, and charge you that amount
well im on 1gb per month. Plenty of data there.
I tried another method today: turn bluetooth on and connect through bluetooth and that seem to works perfectly. I was online for 3 hours without dropping once.
Now I`m wondering why was it dropping with the cable connected? And not even once through bluetooth!
I understand your Problem, but at time i reading your last Post i have an question.
I understand your Posts that you dont use Wireless thether becouse your Carrier dont Allow Laptops to Acces Wireless conections right?
But it makes no difference if you use the cable or a wireless conection to thether your Internet. If you surf under the radar you dont getting into troubles. And there is no blackhole Data when you tether wireless. Its a gprs, edeg, 3g or umts Connection and your Phone manage this automaticly. So now comes my question. Why you dont use the build in wireless tether function which is the fastest and easiest way to connect. You dont need the phone directly near the laptop, you can give it to the point of best data connection, okay and a powerstrip for the akku. But its much faster then the Bluetooth connection, becouse of wlan.
Sent from my GT-I9000 using Tapatalk
"And there is no blackhole Data when you teether wireless"
From now on I will use the AP to connect. I thought the carriers (OPTUS) might find out. But since they can't find out than this is the best option. Thanks for confirming they cant find out weather I connected my laptop or just used the date from my phone.
This remind my at the old days where you share your internet connection thru a soho rooter or just another pc with 2 network cards built in. In these early days the Provider says its forbidden to use the connection for more pcs than one. But in fact they never could meassure this and no one ever gets an letter from them or an contract decline/service interuption. The truth is, that there was a kind of law process against them and now the isp's is forbidden to limit the usage of your internet connection to only one device. So that means not that you get unlimited numbers of ip adresses, but you can NAT as much devices you want. Now you get from every ISP a Preconfigured router if you like.
And the same will hapen over a pariod of time to the wireless providers as well. Its your connection so you can use them the way u like it. Its already happend here, you can buy umts router for your home.
Where i live there is no question like this. Just do it. But maybe its becouse of our mentalogiy. If somone says no the typical austrian will do it anyway and gives no dime to what others say. If no one forbid you something then its allready allowed to do. ;-)
Greetings to Australia (the country with the kangaroos) like we here in Austria say. lol
Sent from my GT-I9000 using Tapatalk
Thanks for that info. That takes my concerns/stress away. Just didn't wanna receive a thousand dollar bill that's all I cared