Answering Machine software - 8125, K-JAM, P4300, MDA Vario General

I have search high and low, but have not foudn this feature anywhere.
It is so convenient to have a software that can pick up the phone, play a message, then record it.
It is faster, easier, and you can keep the recording if you want!
i used to have this feature on my old phone, now I miss it...
anyone know of a software that does this?

no.

gigabyte has it on there wm5 phones:
http://www.pocketpcthoughts.com/forums/viewtopic.php?p=391825
I have seen one aftermarket app that did it also but cant remember the name of it.
It would be kewl if someone had a gigabyte one and could extract it from the extended rom and post it.
since your charged minutes for calling your voicemail to listen to it, this saves you airtime if you have a low minute plan.

try this
k7.net is a free service that provides you with a seattle number that you can use to receive voicemails and faxes. i set it up to send voicemails and faxes to my mda as email. at home i setup my voip phone to copy any voicemail to my mda too. now i get everything to my wizard.
hope this helps,
sl

You'd think this would be a highly sought after feature.
The phone I had almost 3 years ago had this feature. I wonder why it is not so prevalent these days. It is so much quicker and easier than having to dial a voice mail service, or sync messages to the phone.
hmm, maybe this is somethign that should be developed?
Any takers?

hi dear
check this site
http://www.geekzone.co.nz/content.asp?contentid=4698

may be you want to TRY this
remember
TRY

This 1 is free.
work for me.
http://aalialikoski.members.winisp.net/BlogContent/Projects/SMSNotifier/SMSNotifierSetup.cab

This 1 is free.
work for me.
http://aalialikoski.members.winisp.net/BlogContent/Projects/SMSNotifier/SMSNotifierSetup.cab

Thanks for the thoughts, but I looked at the SMS answering machine before, and while it a novel program, it is really just an auto-responder, not an answering machine.
Thanks again, but I am really looking for something that actaully records voice messages.
:?

Alternative to answering Machine - CallWave
when someone leaves a message you get an email of the message that you can save. www.callwave.com

Ah, callwave is interesting, but alas, only in the US. I am in China now. Thats another reason I don't want to use voice mail. Navigating your voice mail in Chinese is sometimes very annoying.
I guess there is no real solution to this then? So sad, too bad. :?

Related

Answer Machine For Windows Mobile 5

Please Send Link Download Program Answer Machine For Windows Mobile 5
Thank You
Sell your phone and buy a Gigabyte GSmart or a Nokia Symbian phone instead!
This is not possible on HTC's Pocket PC phones.
LOL im new to the Hermes world but im quite glad and amused to see such posts about the elusive answering machine happening down here.
st3v3 said:
... answering machine happening down here.
Click to expand...
Click to collapse
Here? He has a gazillion posts EVERYWHERE. Some people just wont learn. What is there to do with these people posting gazillion posts..
abubasim said:
Sell your phone and buy a Gigabyte GSmart or a Nokia Symbian phone instead!
This is not possible on HTC's Pocket PC phones.
Click to expand...
Click to collapse
it is impossible on Hermes, but it might be possible with Prophet. Prophet can record conversations (both side), and it can automatically pick up the phone, so if someone finds a way to play a sound for the other party, then we have an answering machine!
Depends on your definition of answering machine.
I've acomplished this, somewhat.
Get a service like CallWave that can forward voicemail to an email attachment, notification via SMS.
Sign up for AIM email (2gb). Link to that in Pocket outlook. Send receive when u text a txt indicating that you have a new VM.
caveats: REQUIRES LARGE DATA XFER plan. It IS an answering machine in the sense that your vm will play out of the speaker. -- unless you have a wired headset or get A2DP. I had a problem with AIM mail not receiving emails from one of my providers. Workaround: GMAIL forwards to AIM.
I prefer aim for this cos it allows IMAP, incase you want to set up your other, non hermes devices to "read" you voicemails.
HTH
EDIT:
OR u can even set to do this for a PUSH email acct. This way, lets say u miss a call, and you don't see it until much later... by the time u look at it, email w. attachment will already be sitting in the inbox, waiting.
or just use the answering machine most telcos offer with the plan you sign up with, its what i use.
i did like the one on nokia, that and the app that puts sounds into the background of your call but Pocket pc has soooo many other cool features its easy to overlook these.
st3v3 said:
or just use the answering machine most telcos offer with the plan you sign up with, its what i use.
Click to expand...
Click to collapse
That one is not free with many operators in your home country (I for instance pay the air time for listenimg to recorded calls) and THREE times the money as an onboard solution when roaming (roaming with onboard: you pay 1 time the roaming fee (you pay the call being forwarded to the country you roam in) / roaming with your solution: You pay the call being forwarded to the country you roam in, then pay for having the call routed back to your home country where the AM is and finally pay for listening to the message).
Franky
Franky24 said:
That one is not free with many operators in your home country . . . [snip!]
Franky
Click to expand...
Click to collapse
. . . one more thing: operators' voice mail doesn't allow fancy stuff like diverting some people to voice mail, others to /dev/null (busy tone). This you can do with Symbian-based software like SmartAnswer. I wouldn't expect anything less from WM5-based apps.
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks

"Visual Voicemail" without the iPhone

For anyone interested, there is a method that will give you visual voicemail on any phone/pda with direct push capabilities in the USA.
1. Goto www.callwave.com and sign up for their FREE voicemail service (US ONLY)
2. If you don't have access to an exchange server already (for Direct Push mail) sign up for free access at www.mail2web.com, or any place you'd like, I use mail2web because it's free
3. Now, log into your callwave phonepage (link in on the top right on main callwave page) and goto settings. Enter your mail2web (or whatever) address as your email address. then goto (I think.. accounts) the far right tab. Disable text messaging notification (unless you want that as well) and enable email notification. Check the box to have it attach a .wav file of the message.
4. Set up activesync on your pda/phone.... goto messaging and options, select outlook e-mail. Enter the server and login information for whatever exchange server you set up.
Now, open activesync on your device and and goto menu - schedule. I prefer to have mine sync when new items arrive, that way as soon as a new message comes in you'll get it.
Ok, now you should be all set, sorry if I missed anything, post any questions and I'll try to respond quickly.
*** Reasons this is awesome ***
1. If you are transfering data when a call comes in, it will notify you of missed call/voicemail while you are still transfering.
2. Person call doesn't even have to leave a message, you can have it notify you of any missed call, so if your phone is off when you turn it on you'll see all calls, not just voicemails.
3. Callwave actually transcribes the voicemail, so in the body of the email you recieve will be an attempt at speech to text of the voicemail.
4. Voicemail messages are archives online at your Callwave PhonePage, so you can go back and search for old voicemails by typing anything from that voicemail in the search box
5. You can still call in to get messages just like standard voicemail, personal greeting and all that (just call your own # from your phone)
6. If the person calling has a blocked/private # it will still show the number in the email!
I also did a reg edit of the "friendlyname" Outlook E-mail. so my today screen says: Voicemail : 1 new msg
With this method you basically have iphone like visual voicemail, you goto your inbox and pick which ever message you want to hear, click the attachment and it opens in you media player. Or you can get an idea of what the message is about just by reading the text of the email.
Sorry if anyone of this is hard to understand, writing in a hurry because I'm at work.
Post any questions/comments.
-Matt
Any programmers out there
One other thing..
Don't know if it's possible, but if there are any programmers out there that could make an application that would run on the pda that could connect to callwave and allow you to listen, delete voicemails. They have widgets/gadgets that you can add to google/yahoo/Vista that do that, is there anyway to incorporate that into a pda application??
This does not, under any circumstances, work with Sprint. Just FYI.
meatlocker said:
This does not, under any circumstances, work with Sprint. Just FYI.
Click to expand...
Click to collapse
There is no reason in the world this will not work with sprint..it doesn't even have anything to DO with sprint....the only part you might have to do different is find out how to set "conditional call forwarding" to forward all calls when phone is busy to the new voicemail phone #. All the poster has presented is a method to have voicemails routed to email..the only difference between callwave and other services like k7.net and simulsays.com is that callwave currently is beta testing a "voice to text" transcription service and includes a "mostly readable" text version of the attached wav voicemail. When they start charging I can switch over to a free service like k7.net in about 5 minutes and the voice to text is the only part I will lose.
Yes, in theory you are correct. However, as you will clearly see on the CallWave website, they work with everyone BUT Sprint, because Sprint refuses to provision customer accounts to have this type of forwarding. And I can verify this, as I spent 1.5 hours of my time today, through 2 levels of tech support (3 different reps) all of whom ultimately came back and said "impossible".
From the CallWave Activation widget itself (from their website):
"CallWave works with most major carriers including Cingular, Verizon and TMobile. Unfortunately activation is not available for Sprint."
If someone has another method for using the service through Sprint, I would love to hear it.
Sorry about that...looked into it further and you are 100% correct. You CAN do call forwarding but it would end up costing you alot. Apparently sprint charges .10 to .20 a minute for call forwarding and gives you NO free conditional call forwarding minutes. Seems all the other providers have SOME method to do it. Bummer.
Ok..here is one post where they said they had it working and csr got it working for them again...
http://www.sprintusers.com/forum/showpost.php?p=1481614&postcount=7
FYI, I had conditional call forwarding for my busy and no answer calls enabled for my sprint phone so that I could use youmail for voicemail and they also stopped working recently with no explanation.
The codes to enable them (*73 and *74) also no longer work and give an error.
I had to call Sprint and they were able to do it for me I just had to give them the number I wanted to forward to. The rep said that she didn't know about the old instructions but that she had gotten alot of calls recently of people with the same problem so she guessed that something had changed recently where you are no longer able to set this yourself. She didn't have any other information but my conditional call forwarding is working again so I'm happy.
Click to expand...
Click to collapse
meatlocker said:
Yes, in theory you are correct. However, as you will clearly see on the CallWave website, they work with everyone BUT Sprint, because Sprint refuses to provision customer accounts to have this type of forwarding. And I can verify this, as I spent 1.5 hours of my time today, through 2 levels of tech support (3 different reps) all of whom ultimately came back and said "impossible".
From the CallWave Activation widget itself (from their website):
"CallWave works with most major carriers including Cingular, Verizon and TMobile. Unfortunately activation is not available for Sprint."
If someone has another method for using the service through Sprint, I would love to hear it.
Click to expand...
Click to collapse
So basically someone listens to your voicemail and then sends you the 'gist' of it? Sorry, I really don't need someone listening to my work voicemail and I don't think my patients would like that either.
Why on earth would you think they are listening to your voicemail? Have you never heard of speech recognition?
I think it might be exceedingly cost-ineffective to hire staff to transcribe a million voicemail messages. Thankfully some nice gentleman invented computers to make these tasks easier.
fluxist
I didn't think the internet would work on a P.B. 386sx, it is 2007!
fluxist said:
Why on earth would you think they are listening to your voicemail? Have you never heard of speech recognition?
I think it might be exceedingly cost-ineffective to hire staff to transcribe a million voicemail messages. Thankfully some nice gentleman invented computers to make these tasks easier.
fluxist
Click to expand...
Click to collapse
Exactly, it is completely computerized, the text of the voicemail is not all that accurate. If it was typed out by a person listening to your voicemail that person would have to a complete moron. That feature is useful only to give you an idea of what the voicemail is about, it's more entertaining to read them than it is useful however.
wow
maevro said:
So basically someone listens to your voicemail and then sends you the 'gist' of it? Sorry, I really don't need someone listening to my work voicemail and I don't think my patients would like that either.
Click to expand...
Click to collapse
patients? you telling us you're a doctor? I really hope you are better at your profession than you are at grasping modern technology.
mbritten said:
patients? you telling us you're a doctor? I really hope you are better at your profession than you are at grasping modern technology.
Click to expand...
Click to collapse
Actually I am a therapist and I understood it wrong - OH MY GOD, I READ IT WRONG SO YOU MUST BE THE NEXT BILL GATES AND KNOW ALL ABOUT TECHNOLOGY AND NEVER READ ANYTHING WRONG.
Because I am concerned about my patients privacy and you joke, that is sad. I would like to see how fast you would have a lawsuit if you had an illness and that information was available to the general public.
i have an 8125 with WM6 but im not familiar with direct push...although i do get my gmail emails on my phone...can i do this?
stolli said:
i have an 8125 with WM6 but im not familiar with direct push...although i do get my gmail emails on my phone...can i do this?
Click to expand...
Click to collapse
You can still do it, but you would only get message notifications via email by checking your email. Direct push means that the server sends email to your phone without you needing to check it. Microsoft Exchange servers do direct push.
Callwave does offer SMS notification though, can't see why that wouldn't work.
There are some other features with Callwave, not sure how usefull they are, but they are interesting.
You can initiate a call from "in the middle" making both your cell and the destination ring, or home phone for that matter, you can also answer the call on your PC , with the paid service.
So not overly usefull but , some nice tech ...
but didnt older versions of wm5 have direct push? i recall something about that...and is htere any way to have direct push with wm6?
for some reason i could never sign up for a callwave account, i assume its cause I am in canada.
whenever i put my # in it tells me to input a valid mobile phone number
mbritten said:
One other thing..
Don't know if it's possible, but if there are any programmers out there that could make an application that would run on the pda that could connect to callwave and allow you to listen, delete voicemails. They have widgets/gadgets that you can add to google/yahoo/Vista that do that, is there anyway to incorporate that into a pda application??
Click to expand...
Click to collapse
I'm all about writing a plug-in or app that will do for windows what AT&T and Aple are getting sued for on iPhone.
I'm driving myself batty trying to figure out how I can intercept the network signals from the carrier to the device which are used as a notification of new voicemail. From the patents I've read on the existing technolgy, it's possible to get everything but the message itself from the signal. I don't want to speek to soon, but there's an ID that's transmitted as part of this message it supposedly the "unique" on the message in YOUR VMail box.
If anyone has any tips on how I can intercept that message, even if you only know the protocol....that would be a huge help.
I've tried intercepting SMS already and left a VM for myself and NOTHING! I'm still playing with it though. I think that I maight have been watching for the wrong message types. I might need to trap for RAW (priority=0, for you regedit nuts out there)
Later,
-D
good stuff i have a wizard but i just set it up so i'm goin to check it out
should come in handy since i don't get all my calls sometimes
I gotta admit this is pretty damn cool so far..
Biggest plus is seeing missed calls when my phone is off and seeing block #'s
awesome thanks for the heads up
Haven't tried callwave yet but I've been using Simulsays visual voicemail on my 8525 for a while now.

sms via cellular-line, bypassing the sms-gateway?

hello,
i wondered if it might be possible to develop an application which enables one to send an sms directly to another phone (running this application)
one may wonder, why i want to do such a thing, but for the better understanding, i will it explain it right here:
i moved to another city two weeks ago and i ordered my phone- and dsl-line at "1&1". 1&1 activated my phoneline and dsl 16000kbit/s connection. additionally they sent me a sim-card for my mobile phone. it enables me to call any fixed line number without any cost. and after a bit of research on the 1&1 website i found, that i can buy a second sim. i would be able to call this sim without any cost, too.
but the sms would be, as everywhere else 19€ct/sms.
so i wondered, if it might be possible to write a windows mobile-software that would be able to send some text directly via the cellular line. without passing the sms-gateway.
i thought of: text-to-tone conversion-software which then calls the other phone, which auto-pickups on certain phone-numbers, and then receives the tone-sequence, and converts it back to readable text.
of cause, the better solution would be to send the text digitally, but i don't even know if that might be possible.
any suggestions and ideas are very welcome.
sorry for my bad english, and sorry for the fact, that i will not be often online, cause my own pc is broken, so i have to go online in school.
greetings
garfield
Wouldn't this be similar to a fax machine?
Not being obnoxious, but it just sounds difficult since SMS is rather just a quick way to send messages from one phone to another. Calling and sending messages via text wouldn't be fast at all. I'd rather just say what I have to say...
i'd say if it was possible it would require both phones to have the program to interp the data recieved as the right type of sms
it's much like the sms over gprs thing
lemme get this straight, this is essentially an analog modem emulator, so not only would "messages" be able to be sent but files could aswell.
Would it also be possible to make "said" communications when your already on a call? that would be cool
Carnivor calls Rudegar on the phone,
Carnivor really says, "Hi Rudegar, im gonna send you that excel file now"
Rudegar really says, "Ok Carn"
you could have a signal that it sent to trigger the other phones running app to be ready to listen for the signal, then handshake and transmit and recieve data,quick ok msg on the screen, or even have it so you get "transfer completed" in the earpiece once completed you can carry on speaking over the phone.
Rudegar really says, "Thanks Carn, this is really good info, chat chat chat
intresting concept!!
you could intergrate "send data" into the phone app skin so when your in a call its easy to start up,
so it'd be good for small file transfer, or a chat app for ppl that have spare minutes to burn and dont mind not being able to make and recieve calls whilst its running.
but it could have its uses
Hi,
yes it seems to be a modem emulator, while being on my way home yesterday i thought about the problem bypassing that gateway... i thought about an own sms-gateway.
anyone has some information on how a sms gateway works? so i could write one and integrate it into my Fritz!Box or run it on my computer. this would enable me to send sms without cost, because calls and connections inside of the 1&1 VoIP network are costless...
the analog modem emulator would be an excellent idea, too... as it would allow to transmit files and "realtime" chat between one or more people.
so, any ideas on the modem emulator and the gateway are apreciated.
greetings
garfield
just Get mxit it doez dat
Get mxit it does what u mean but both phones need have this Client and you need to be online at the same time and if you not it has offline message storage and it doez filesharing to www.mxit.co.za/wap and try smsbug www.smsbug.com
defcomg said:
Get mxit it does what u mean but both phones need have this Client and you need to be online at the same time and if you not it has offline message storage and it doez filesharing to www.mxit.co.za/wap and try smsbug www.smsbug.com
Click to expand...
Click to collapse
so mxit is a chatrelay for other instant messaging protocols, and one has to be online via GPRS/3G/UMTS/EDGE ... this produces extra cost and is not exactly the thing i wanted to have.
smssbug is a great alternative, if you're sitting in front of a pc, but no alternative for me, as it also produces cost although this is secondary when talking about 3ct/sms.
what about that "modem" emulation? is there any software out in the internet? i haven't found anything via google.
and the next thing i am thinking about is, if it might be possible to digitalize the phone-to-phone communication. or is it limited to analogoue transmission of data, because of the way it is transported over the network?
i haven't looked into the idea with the sms-gateway, but i will look that up as soon as possible, when i have my internet-connection at home.
greetings
garfield

[REQ] Visual Voicemail program (willing to pay!)

Hey everyone. For a long time now I have been waiting for someone to design a visual voicemail program for Windows Mobile. Unfortunately, it seems no one has been interested, which I find rather odd. There are a number of services available now that allow for customized voicemail storage, YouMail and Grand Central being the most popular. They also have the option to send a copy of the voicemail to your email with call details and the audio file as an attachment. I have been using YouMail to do this for the last year or so. Unfortunately, they don't offer a front-end for this. They have a mobile website page, but frankly I'm not impressed. What I have been hoping for is a program that will read the emails and parse out the appropriate information, and play the attachment. I have attached a picture of what I was envisioning. Anyone think they're up to the task of realizing this project?
Great idea, I myself would love to have this, it's one of the few things I miss from my old Treo. But, I don't know if it's possible to get info like the message time, caller name, and number. It would be a simple set of buttons that could be configured properly to choose an option.
TheChampJT said:
Great idea, I myself would love to have this, it's one of the few things I miss from my old Treo. But, I don't know if it's possible to get info like the message time, caller name, and number. It would be a simple set of buttons that could be configured properly to choose an option.
Click to expand...
Click to collapse
Message time, caller name and number are all in the body of the email that is sent. It'd just be a simple matter of parsing the data correctly
i think the major issue no one has done it yet is because everyone uses some different service.
its not like ok all the iphone ATT people use X visual voicemail service and the vZW people have Y service. Youre talking about an interface for every possible service like grandcentral or those forwarding services- theres at least a dozen and they all use different audio formats and such.
The real issue is consolidation to please everyone, and devs dont want to put time into make niche programs for every possible service.
Blowfish64 said:
Message time, caller name and number are all in the body of the email that is sent. It'd just be a simple matter of parsing the data correctly
Click to expand...
Click to collapse
What email?
klmsu19 said:
i think the major issue no one has done it yet is because everyone uses some different service.
its not like ok all the iphone ATT people use X visual voicemail service and the vZW people have Y service. Youre talking about an interface for every possible service like grandcentral or those forwarding services- theres at least a dozen and they all use different audio formats and such.
The real issue is consolidation to please everyone, and devs dont want to put time into make niche programs for every possible service.
Click to expand...
Click to collapse
That's true, but the thing about that is that a) there are only a few voicemail services out there, and only a couple that a lot of people use (YouMail, GrandCentral, SpinVox, and b) in order for a program to support all of them, the only thing you would have to change would be to tell the program which email format you are looking at. In other words, you'd only have to specify the parsing format, which would be a relatively simple and short section of the code that could be specified in settings. Also, they don't all use different audio formats, they use standard ones which would all be played by the same standard API call, so that's not an issue either. Anyway, hopefully this thread piques somebody's interest.
TheChampJT said:
What email?
Click to expand...
Click to collapse
The email that you get from YouMail or GrandCentral or whatever voicemail service you're using (the email that has the audio as an attachment).
Anyone interested in this?
YES
I know I am
^Me too.
but we are in germany here.
Check out mVisualVoiceMail (google it) it works great and does exactly what you want. I use youmail and it works awesome.
mbritten said:
Check out mVisualVoiceMail (google it) it works great and does exactly what you want. I use youmail and it works awesome.
Click to expand...
Click to collapse
Did they just release a new update or something? I tried mVisualVoicemail and it didn't parse the YouMail emails correctly and also didn't play the .mp3 attachments.
Does youmail work in the UK? Iv never thought of a service like this, and it actually appears useful.
dzign-it said:
Does youmail work in the UK? Iv never thought of a service like this, and it actually appears useful.
Click to expand...
Click to collapse
Unless they have a UK # to forward to I wouldn't think so...the forwarding # is USA based and since it uses conditional call forwarding rates you'd be paying international minutes.
i've been using callwave for my visual voicemail with att this before they started making you pay i just gotta email sayin that there goin to end the beta program so i'm thinkin about switch back to youmail one think i don't like is that youmail doesnt automatically update after you recieve a new message
but the developers are working on it
Keland44 said:
i've been using callwave for my visual voicemail with att this before they started making you pay i just gotta email sayin that there goin to end the beta program so i'm thinkin about switch back to youmail one think i don't like is that youmail doesnt automatically update after you recieve a new message
but the developers are working on it
Click to expand...
Click to collapse
Yes, they're working on a lot of things. Unfortunately, something like this isn't one of them. Hopefully a nice friendly neighborhood programmer has a little time on his hands . Please???
Blowfish64 said:
Did they just release a new update or something? I tried mVisualVoicemail and it didn't parse the YouMail emails correctly and also didn't play the .mp3 attachments.
Click to expand...
Click to collapse
I had the same problem about 8 months ago, so i was using callwave, but since its no longer free i switched back to youmail. mvisualvoicemail parses the names perfectly, doesn't do .mp3 though, only .wav
mbritten said:
I had the same problem about 8 months ago, so i was using callwave, but since its no longer free i switched back to youmail. mvisualvoicemail parses the names perfectly, doesn't do .mp3 though, only .wav
Click to expand...
Click to collapse
I'm not sure how you're saying that. It does the name sometimes, but not when the call was, or the duration of the call, or anything else like that, and as you mentioned, it doesn't play .mp3s so all together it's hardly a sufficient solution. Is there anyone here interested in developing a working solution?
bump........
bump...........

[REQ] Voicemail stand alone application

I wonder if there is an application that would pick up my phone after some rings, and plays a message and people can drop a message.
So I will have a voicemailbox with recorded messages which I can point and click at, save them, listen again, etc. Just recorded als .mp3 on internal storage. Maybe even callback options, sms-back options etc.
I really hate dialling that voicemailbox number, choosing 1 and 2 to listen messages. I have no overvieuw of messages etc.
The app looks fairly simple to me. Does it exist already?
You're searching for some kind of on-device visual voice mail
I would really like to see this at this moment my voicemail is nothing more than a question to mail me or sms me but most people do not like that
one question when your phone is off or you are out of range what would you like another app to take it over?
This is a nice idea...
See it more as a secretary app. instead of a voicemail app.
Where you're in your car and you don't / can't talk.
Perhaps something with different messages you can choose from (you need to make them yourself?)
Something like "Hello this is <insert name>, I'm driving at the moment, please leave a message after the beep" *beep* The person leaves a message that will be saved as mp3 file for example.
@WvanWaas
When out of range, your 'standard' voicemail will take over.
But when in meetings, or as said, driving, it would be nice that the persons message can be stored on my device.
The ultimate thing would be that this program can dial my voicemail, automaticcally send DTMF tones (time and pattern), and store eventually new voicemailmessages locally. The number of new voicemails on my network is available (since manila uses it too).
With Telfort home-phone, I get emails with .mp3s of voicemail messages (VOIP). Thats really good.
With vodafone UK I was using vodafone mail - voicemails automatically appeared as emails with WAV attachments.
Was very handy
There dont exist any programs?
the only app is isecretary. it doesnt work on diamond though
I use www.youmail.com and also wrote a simple client to parse through my emails and just list my voicemails in a UI.
Youmail also does speech to text transcription so you don't even have to play the sound file-- just read it.
It not for outside US I guess...
It looks promising...
It exists for Nokia phones
I have not found an application as such for the diamond but I know that it exists for Nokia. With the Nokia N95 there is a built in application that works as a voicemail. Of course only when there is coverage and the phone is working.
The application picks up the call after some time (configurable) and plays a greeting message that you have previously recorded and after the beep, the caller can record his message. The application saves that recording and whenever you are available you can playback that message.
Hope to find one for Diamond.
Yup, my T-Mobile voicemail charges are silly, plus I'd like to have more control and functionality from my voicemail. An included blacklist filter would be handy too.
I have a Touch Pro (Raphael).. Is there really nothing around at the moment that will work? That's kind of strange.
Just kick this one up once more ...
This type of app could cause some expensive long distance charges if you were outside of your local calling area though, no? I'm thinking your phone would need to be connected to the call in order to record an .mp3 voice message locally on the device, whereas carrier voicemail can be received regardless of where you are anywhere in the world without costing you as the user a fee to receive a message.
I see that Touch HD can record calls.
http://forum.xda-developers.com/showthread.php?t=457808&page=4
A simple application which auto-answers, plays a file, records a message and nicely puts them in a list, so I have total controll of my voicemessages?
That would be well killer-app... I'd pay for it, simply because I need it.
i realy want this app too!!!!!
Sounds nice to me as well
+1 here....
Try This. Loaded on my Diamond but havn't tested it.
65coupei6 said:
Try This. Loaded on my Diamond but havn't tested it.
Click to expand...
Click to collapse
thanks, i installed it, and recorded an message for people calling me, but cant get the program pick up my call... i allready said he must pick the call after 3 sec. and also after 0 seconds, he dont pick up any call... i added the number with wich i'm trying, at an group, and i see the missed call in isecretary also, but he dont pick up... any body know how this works? the site op the maker is down
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks
that's what every diamons-user needs!
http://www.youtube.com/watch?v=jqnhm8yfTqM

Categories

Resources