Hi, has anyone tried to increase the call history so that it will be unlimited? It appears that around 300 calls it starts dropping calls. And has anyone figured out a way to copy the call list thru active sync? Thanks, Ken B
I haven't tried to increase it, however I have seen a reg key that leads me to believe it can definitely be changed. I'll see if I can find it again.
Haven't bothered to try copying the call history though.. that's what I usually use my statement for..
HKCU\ControlPanel\Phone\CallHistoryMax
try this
That would be the key I was thinking of. Thanks fordcan!
Nothing at all :wink:
Has anyone tried to modify the DWORD Data value?
Over at the PDAphonehome forum a poster "jrider" tried doubling the DWORD Data value and it did not change the limit of just 300 calls. The DDWORD Data value is set at 65535, is there anyone who has found an amount that would make the call history unlimited, or increase it? Thanks, Ken B.
does anyone have any new ideas on this subject to bring to the table?
Just curious question, since PIM Backup can backup the call history is it still a grave matter to increase the limit?
Advanced Configuration Tool v3.3 IS ALSO NOT WORKING FOR THIS PROBLEM
Related
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Hi All. I have been looking arounds for over an hour and had no luck finding a working solution. How do I adjust the call history limit on my WM6 HTC Touch? I noticed that it has been removing my call log after 300 calls. Thanks
Does anyone know of a good call usage monitor. I use to have Phone Dashboard but I can't add this to the HTC Homepage. The call timer in Windows Mobile only monitors all calls not just outgoing calls, as far as I can see. Any ideas
pda-prof said:
Does anyone know of a good call usage monitor. I use to have Phone Dashboard but I can't add this to the HTC Homepage. The call timer in Windows Mobile only monitors all calls not just outgoing calls, as far as I can see. Any ideas
Click to expand...
Click to collapse
Ummm....have you checked under the call history button on the dialer? When you launch your dialer, click on the call history button. If its showing you all calls click on menu-->filter and select only outgoing calls. It should show you only outgoing calls now as well as durations for each. At least that's how it is on WM6....I don't know if they've changed if for 6.1
Nope. You can view only the duration of the calls when you open Call History and select specific person in it. Or through Contacts -> Click contact -> Menu -> View all calls.
It is very disappointing, because at least I want to know the duration of the last call. Doesn't matter if I end up the call or the other party. This dialer doesn't show last call time!
Thanks [email protected].
However, the Call History lists all the calls made or have come in via the filter. However, I want to know how many minutes a month I have used and unless I try and add all the outgoing message together, I'm stuck.
Under Call History there is a button called menu which gives the option "Call Timer" but if you click on this it gives you the total number of calls made since last hard reset (I assume) and the number of minutes used since last reset. Most people, I would think, with a contract want to know the number of outgoing minutes since last reset (with reset being since the last cut off date for calls on their contract). This appears to be missing. Can anyone help or know a program that does this that could be intergrated with the HTC homepage.
pda-prof said:
However, the Call History lists all the calls made or have come in via the filter. However, I want to know how many minutes a month I have used and unless I try and add all the outgoing message together, I'm stuck.
Under Call History there is a button called menu which gives the option "Call Timer" but if you click on this it gives you the total number of calls made since last hard reset (I assume) and the number of minutes used since last reset. Most people, I would think, with a contract want to know the number of outgoing minutes since last reset (with reset being since the last cut off date for calls on their contract).
Click to expand...
Click to collapse
I'll second that, any way of\software for knowing how many minutes have been used in the monthly bundle?
Try Home Screen Plus
Have you guys tried Home Screen Plus? Its a great piece of software...and If I'm not mistaken it does have a feature to track call timers etc. Give it a shot. Its free Make sure you download the latest version. I know of a lot of other older versions floating around.
that is a real cool app but also a little heavy just for the calltimer. Anything with a small footprint out there?
Thanks Guys. However, I want to keep the HTC homescreen but I don't think you can add bolt ons to it, so any homescreen add-on won't work. I need a program that runs on its own that monitors the minutes and then being able to access it via the programs tab.
Found - LCMinutes
Not the easiest to configure, but once you grasp the concept it's a doddle (and elaborate).
LCMinutes :X
so i played around with LCMinutes and all it did was give me a headache! lol
i found this and wanted to share:
hxxp://www.hudsonmobile.com/products/phodash/index.html
is very very neat and a very easy to configure
ta
I had heard it didn't work on the HD but if it does, how about sharing it on the wiki
Can anyone comment if this works with TF3D?
Call timer on Dutty´s Touch HD 2.1 is missing?
Hi there!
Anyone having problem with a missing call timer on Dutty's 2.1?
Or should I do a hard reset?
Thanks!
I am using phone dashboard which I find is very good and should suite your needs. Without Today screen it is a pain to use but still possible. Goto settings->Today then highlight the plugin and options. There is one tab which shows you the usage. But you have to "regenerate" the data before viewing.
Alternative, why dont you just run TouchFlo + Today screen (using TFD or SecondToday).
I know phoneAlarm also have a call duration tracking but phoneAlarm is just too much of hassle to configure.
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
Is it possible to merge the call history per contact?
I'd like to be able to scroll through recent calls initially only per contacts, and get the individual call history per contact under the contact details.
I haven't found a setting to change this and no post either.
yes, this is a bit anal, but also quite annoying.
anybody able to help?
cheers!
moping won't help said:
Is it possible to merge the call history per contact?
I'd like to be able to scroll through recent calls initially only per contacts, and get the individual call history per contact under the contact details.
I haven't found a setting to change this and no post either.
yes, this is a bit anal, but also quite annoying.
anybody able to help?
cheers!
Click to expand...
Click to collapse
man, i dont even have enough calls on my phone to be able to test this out. not sure if this is sad or awesome (strong defense point on the latter as i talk on the phone a TON for my job and hate talking on the phone outside of my required workload as a result)
Yes I can see how talking to the same people makes that easier.
If I remember correctly I think my old iPhone 5 did this by default.
Scratching my head...
There may be apps that allow you to do that. I would check the play store. I used to have an app that allowed different kinds of sorting and views, but I don't remember what it was.